The battery will be discharged when my Satellite L670 is turned off and unplugged

Similar Questions

• I can't open attachments of the e-mail account. When I try my computer turns off and restarts and when he comes back he says he recovered a serior error.

  A couple of days, I did a restore of the system at the end of July because the size of everything was off of the big time and had never done a system restore before.  Since I did, everything is returned to the way it was before sizes... and I can receive and send emails... I have JUST CAN NOT open attachments on e-mails.   When I click on the attachment to bring it up, it shuts my computer off and restarts it and when it turns on it says that it has recovered from a serious error.    How can I fix my email so I can set up attachments?

  What e-mail program?

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• Satellite Pro L650 - 1 L 4: battery will be discharged when the laptop is disconnected

  Hello together,

  I have a problem with my 5 month old laptop Satellite Pro L650 1 L 4.

  When the laptop is unplugged it will pay the battery. About 44% within 24 hours.

  Of course, options like BIOS "Wake we Lan ' and something like which are completely disabled.
  And of course the laptop is turned off completely and not the Sleep Mode.

  Any ideas?

  Kind regards

  Stephan

  Hello

  Please check if the wake-up on LAN is also disabled in the properties of LAN card (Device Manager-> LAN card-> properties-> Advanced tab).
  I also recommend checking the WLan card as well.
  Please also check if attached USB devices don't lose the power of the battery.

  But also a malfunction of the accumulator may be possible... so it has to be checked also...

• Battery won't charge when my Satellite Pro L500 is off

  Hello.

  I have a satellite Pro L500. Normally when it is plugged into the DC in and battery led lights. Now, both are turned off when it is plugged in and the computer is turned off. I found that in this state the battery is not charged. The computer does not light when the power is connected. If I remove the power source and wait a few minutes, the computer turns now and opperate normally.

  If I plug in now the power leds are lit and the battery is charged

  It s really bad situations.

  Warranty is still valid?
  Have you thought about contact Toshiba service and ask for help?

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  Hi mweedn!

  I understand that you see a reduction in the battery of your iPhone 5s after updating to iOS 10. It is important to be able to make full use of your iPhone! There are a few resources that can help.

  Before the resolution of the problem, were you able to view information using your battery on your iPhone? Here's how to check the amount of battery used by each application:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you answer, remember to let us know if you see all the apps with an abnormal amount of battery. See you soon!

• AC adapter does not work if the battery is not removed on my Satellite?

  A few days as my Satellite does not use electricity from the adapter: he wants to only use the battery (so after a few hours, it stops).

  Connect and disconnect the power supply when the notebook is on or before restarting, it doesn't change anything (if the battery is always in its place). The power adapter, cable spines,... seems in good conditions and I don't think they have problems because when I remove the battery and restart the laptop, the Satellite finally understands that he must use the power supply and not the battery. Then I can put the battery back in its place and load it... But if I unplug the AC adapter, the circus re - start.

  Is power off somewhere? Is there a place where you can choose: "always use the battery and not the power?

  I don't think so, it's a motherboard problem?

  Hello

  It is not easy to say why it happens. For me, this looks like an electronic malfunction of power supply.
  But it's only my suggestion to be 100% sure that some diagnostic tests are necessary.
  But the battery is ok and AC adapter works as well as you suggested.
  What you can do is to check your BIOS version and compare it with the BIOS that is available on the page. Is there a newer version, so you can try to update.
  Note: Be careful! Bad BIOS and update wrong procedure can damage the laptop.

  But if you use the latest BIOS, so I think it must be a hardware malfunction. In this case, the only way to find the bug is to ask the AEP from Toshiba in your country for help.

• What do I have to remove the battery from my PC when I connect it with the cable?

  So that the battery do not damaged.
  What do I have to remove the battery from my PC when I connect it with the cable?
  Tell me what I need to do for that battery not damaged

  Hi mate,
  Don t worry, just use your machine and leave your battery in your machine, because an electronic load look at your battery, so no damage will be caused.

  You know, technology is in fact at a good level and I think it s ok to operate your machine with cables and battery SET. :

  Greetings

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• The battery is completely discharged during the night: 100-0%

  Apple has done with the 9.3.1 update my broken ipad.
  The battery is completely discharged during the night: 100-0%
  What should I do?
  translated with Google *.

  THX

  Mimatete

  Find out what applications are running in the background and delete the unnecessary ones.  Location service is such an evacuation.

• When my battery is fully charged, what button I press to turn off the battery and use the DC

  When my battery is fully charged, what button I press to turn off the battery and use the DC. I need to know what to do to avoid the impoverishment of my battery. OR is it save to leave the computer on, even when the battery is fully charged

  Well, actually from what I read, it's correct exactly as it goes, but not a complete list of the maintenance of the batteries all the factors, methods, practices and details regarding the definition of periodicals.

  While he was just more info not really part of what has been requested, this is why I don't give him properly a collection, I appreciate that you expand on it with greater precision.

  It is not often that one of my messages is considered as not long enough.  :-)

  Thanks for the help.

• T420 screen turns off and turn it back on when the AC adapter / CC is attached or removed

  You are working on your machine, staring at the screen and the power failure... Yes - something quite common in these parts of the world... but no worries, the screen darkens slightly according to the diet plan and you hardly notice. Then, when the backup generator kicks in and the power is activated again, the brightness of the screen is back to your usual setting. Meanwhile, it is not a gene. Right?

  Well, that's what should happen... except that most of the time it doesn't work! Most of the time, the screen turns off and then turns on remove the main power and reinstall it. Note that this never happened once with T61 or T41p.

  Initially, I assumed it was because I had an external monitor attached... maybe it was to reconfigure something there? But then, it happens even without the external monitor. Then, I tried looking for the video driver updates... maybe this bug had been fixed to the... no luck there.

  So, finally, after having known this more often now, I thought I would get feedback from you all. Any advice?

  Check the Intel Media profile with the power settings. If a battery is "Maximum economy" mode then it should be in Exchange for 50 Hz to 60 Hz... Change it to balance or maximum Performance and see if its ever-changing from 50 Hz to 60 Hz...

  If all else fails, try updating the video driver, it might be a bug in the previous version of the driver.

  See this KB for more information

  http://Forum.Lenovo.com/T5/T400-T500-and-newer-T-series/T420s-screen-refresh-rate-drop-to-50Hz-when-...

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Peripheral 2270Dw HP printer. Toner replaced with unit other than Brother and Toner light will be will not turn off and the unit do not print.

  replaced with Non-frere unit "and" toner light toner unit does not turn off and the printer will not work.  How can I reset?

  Hello

  Do you use the HL-2270DW printer?

  Follow the steps in troubleshooting mentioned in the articles below:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Print the problem - troubleshooting

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faq_list.html?reg=us&c=us&lang=en&prod=hl2270dw_all&cat=112

  If after following the steps of troubleshooting mentioned in the article above the problem persists, I recommend you contact the manufacturer of your printer by clicking on the link

  http://www.brother-USA.com/support/custserv.aspx

  http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/monolaserpri/hl2270dw_all.html?reg=us&c=us&lang=en&prod=hl2270dw_all

  He hopes to help!