The Cisco Telepresence SX80 solution help

Similar Questions

• Randomly call in Cisco TelePresence SX80.

  I have a recurring problem of many unknown incoming calls in a Cisco SX80 recently deployed. An example of the address that we get these calls from the East [email protected]/ * / I have no idea what is the part of the address in 1986, but the 129.59 address is the IP address of the codec. I am somewhat a novice in the world of VTC, so I am at a loss on how to stop the calls. Automatic response has been disabled pending just so that the device can be used.

  I assume that the system uses an accessible public IP address?  If it uses a public IP address, you should put behind your firewall with NAT, or allow only traffic from known IP addresses.  If you don't use a SIP, you can enable turn off completely, however if you are, you can disable SIP ListenPort and activate outgoing SIP so to avoid these calls, see bug CSCue55239.  There is a form any of these calls which will appear as coming from "cisco", the only way to prevent these is to put endpoint behind your firewall and use NAT or an ACL.

  You can also watch here for a bit more information, anyone-know-why-edge-95-mxp-will-call-itself, as well as further discussions in the forums associated with these types of calls.

• Download the Cisco TelePresence SMB Partner program

  Hi, guys, did anyone know where to find a guide trainning or a material to do this review?

  --
  Concerning
  Edson Vuma

  Hi Edson

  Any education and review for TP SMB on Cisco PEC

  www.Cisco.com/go/PEC

  or http://www.cisco.com/web/partners/downloads/partner/sell/smb/tp_smb_program_aag.pdf

  In this look you will find the direct link to the PEC training guide.

  BR Oleksandr

• Integration of the Cisco Telepresence SX20 with Cisco Telepresence EX60

  Hi all

  I have a question, I have the following device:

  -SX20 together

  -EX60 with touchscreen controller

  Do I know if the EX60 can be deployed in an environment SX20? as each of them as functions of call I don't know if it will be in conflict or not because I have little knowledge about the voice and video. If the device can be integrated, can I request a deployment guide, the configuration guide on these? Thank you very much!

  If your devices are not connected to any call (VCS or CUCM) control, search for SX20 autonomous in the forums - there are many threads that describe what you need to configure the settings.  Do the same configuration on the SX and exodus once this is done, you should be able to call the IP address of one of the other.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Replacing Cisco TelePresence IP gateway series

  Hello

  What product replaced the Cisco TelePresence IP gateway range?

  THX

  According to the announcement of end of sale and end of life for the gateway IP Cisco's TelePresence

  There is no alternative available for the gateway IP of Cisco TelePresence at this time.

• Cisco telepresence video Communication Server (VCS) - compatibility CTX X8.1.1?

  The Cisco TelePresence Exchange System compatibility matrix (CTX) does not cover version of VCS X8.1.1 (to solve the problem of software). Version X7.2 is recommended and supported which is affected by "heartbleed".

  X8.1.1 compatibility is tested by Cisco and the updated matrix?

  In fact we run CTX v1.3 with VCS X7.2 and solve the problem of software without leaving the support. What is the recommendation of Cisco?

  Kind regards

  C.Opwis

  You could improve your VCS to X7.2.3 which includes a fix for Heartbleed.

• Requirements of Cisco TelePresence C for landlines and mobile calls

  Hello everyone,

  I have questions about Cisco TelePresence C: I know that you can call to landline and mobile phones as well as these.

  I would like to know more technical details about this:

  -What else should be part of the installation of the TP C series in the case of calls on fixed or mobile? This Protocol must be used (H320 ISDN)?

  Should I also buy Cisco TelePresence ISDN Link - http://www.cisco.com/c/en/us/products/collaboration-endpoints/telepresen... or can I use a gateway and SIP protocol for fixed lines?

  Thank you for the answers.

  Inorder for you make or receive calls to PSTN/Mobile then you will need some sort of bridge. Yes the ISDN link can work if you have a few points of termination.

  If you have more endpoints and activate this cabability for all then a network infrastructure device would be best, such as the Cisco TelePresence ISDN GW 3241

• Configuration of the firewall Cisco Telepresence MCU 5320

  Hi all.

  I searched all the documents of the MCU again, but I found nothing on the ports it uses.

  Help me

  HI Sandra.  The 5320 MCU is the same as 4500 MCU.

  Incoming ports

  • FTP - TCP:21 + transient (dynamic rather than fixed) used TCP ports for passive mode
  • HTTP - TCP:80
  • HTTPS - TCP:443
  • H.323 - TCP:1720 + ephemeral TCP ports for incoming calls
  • SNMP - UDP:161
  • Outgoing calls to H.323 involve ephemeral ports TCP connections TCP TCP:1720 and a certain number of ephemeral TCP ports
  • Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5060
  • Outgoing SIP TCP calls involve connections between the TCP ephemeral ports and TCP:5061
  • Outgoing interruptions SNMP are sent the ephemeral ports UDP Port 162
  • Media (including audio and video, FECC messages) are ephemeral ports from ephemeral ports UDP.
  • The products acquired Cisco TANDBERG/Codian and gateway series series Cisco TelePresence allocate the ephemeral ports between 49152 to 65535 *. It is possible to change the ports on which these products receive and establish connections. For example, by default the Codian products Cisco acquired listen port 1720 H.323 calls and connections to port 80 web browser, but these can be modified (go to network > Services).

  Keep in mind this MCU does not support the streaming or conference me and have either the GK aboard.  If these ports are listed.

  The link to the Article can be found here:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/articles/conferencing_products_conferenceme_ports_used_kb_3.shtml

  VR

  Patrick

• The implications of Cisco Telepresence server operation mode

  I have a CISCO Telepresence server that is currently running in mode managed locally, if change you it remotely and add it to my TMS, will I lose all my permament locally created conference rooms? (be they get deleted?)

  Thank you!

  HI Douglas.  TS blade didn't need to be mode remotely managed so that it can be managed by TMS.  This mode is used for the management as a conductor Telepresense.

  When it was presented, was 3.0 TS.

  Release notes:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TS/release_note/Cisco_Telepresence_Server_Release_Notes_3-0_2-24.PDF

  Page 2 pretty much answer your questions here.

  If your not using a conductor or by using your own program API to use TS in this mode, its better to leave behind in managed mode and add the system to MSD and leave it that way.  This is the normal operating mode if you use the TMS.  Let in managed mode locally, add it to the TMS and you can book etc. against it using TMS meetings.  If automatic discovery is enabled in TMS, permanent meetings should appear in the CCC.

  I hope this helps.

  VR

  Patrick

• My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  This problem is solved replaced smps problem is resolved. Maybe the smps is not given the correct voltage

• Is any impact of a change of the password of the local user account on an instance of a content server Cisco TelePresence virtual computer?

  Hello

  I'm looking to see if there is an impact to change the password of the local user account on an instance of a content server Cisco TelePresence virtual machine?

  The software version is v6.2 build 4073.

  Thank you in advance,

  Robert

  I'll assume, you are referring to the administrator account, but it can be applied to any local account which is located on the TCS server itself.  It has no impact to change the password, unless you are using doesn't say account to connect to the server of TCS or web interface, it will not affect the application of TCS as most things such as external storage or clustering rely on domain accounts and not the local server.

• The CTS-CTRL-DVC8 is compatible with the Cisco MX200 G1 telepresence?

  Hi team,

  Please confirm whether CTS-CTRL-DVC8 = (Cisco TelePresence Touch device) is compatible with the Cisco MX200 G1 telepresence.

  Thank you very much.

  Sorry, misread the Gen1 in your message.  Yes, the 8 Touch works with old Gen 1 MX200 of TC software running.  This is mentioned on the MX200 data sheet.  Older hardware (MX Gen1 and C40/60/90) press the 8 only and cannot be upgraded to the new software for THIS.

• Activation of presence on the web setting in cisco telepresence SX-20

  I have EDT cisco telepresence SX-20 devices, want to allow the web presence but the poster ' mistake: it will be changed setting OSD "guid .pls myself

  What setting exactly are you trying to change?

• Cisco TELEPRESENCE DEPLOYMENT ADVISER SX10

  Hi all

  First of all thank you for helping to...

  Well, I intend to deploy TELEPRESENE with the SX10 device for the first time; Therefore, I seek advice from several people experience deployment.

  Requirements:

  Four sites with a single SX10 each;

  Any B2B on the picture at the moment.

  Each site has 100 MB VPLS fully connected;

  Now we have to just point to point video meeting;

  I am running UC 10.5 in all sites, therefore, the sx10 can directly registered with CUCM.

  I have read the deployment guide, but there are a few things in there that I don't really get! : http://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Collaboration/mid...

  Question:

  I have already deployed EXPRESSWAY-C/E but not tested yet though. Main objective behind C-E/HIGHWAY was to replace SNR. But if we just point-to-point videophone, it still need them?

  Please provide your suggestion, comments... and, of course, traps...

  Thank you

  When you say Cloud CMR, this will allow WebEx customers to join your meeting Collaboration (CMR) rooms in your infrastructure. Deployment of cloud RMC should WebEx Meeting Center to be integrated into your company RMC.

  This guide might help:

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/solutions/cmrcloud/CMRCloudEnterpriseDeployment.PDF

  Kind regards

  Acevirgil

• Cisco telepresence camera question - motivates and focus on who speaks. ???

  Hi all

  Wonder about a telepresence from cisco camera that when placed in a conference room can detect, move and focus on the person speaking?

  Is this feature available on the PrecesionHD 4 x camera or another that I do not read this feature in the data sheet?

  If so, please provide the reference for this.

  Kind regards

  It is compatible with the SX80, C40/60/90 points of termination.  SpeakerTrack 60 is a unit of two cameras and therefore requires two inputs of camera on the codec, then it will not work with the SX20 because it has only one entrance of the camera.  Both cameras help to provide seamless switching of active speakers in the room.