the dav-dz170 home theater DVD system problems...

Similar Questions

• xbr65x900c and HT-CT790 no sound, showing not not under the list of the bravia sync devices and not under the control of home theater

  I just bought a bar of his Sony HT CT790 and I'm trying to connect it to my TV Sony xbr65x900c, but it does not work.

  I have connected the HDMI ARC at both ends and verified that the menu of the bar of its manifesto in hdmi 4.

  I even updated the sound bar to the latest firmware and checked the TV is updated too, but the bravia sync devices list doesn't show any connected device and the control of home theater is not any device, and my sound bar is not listed in the supported audio system (HT-CT780 shows under is supported) This means that ht-ct790 is not taken in charge?)

  Help, please

  OK it's fixed! you won't believe how!

  Instead I used a HDMI cable, that I got with my xbox one and it worked!
  Also the bravia sync works and home theater!

• Replace the HHD with SSD as drive system problem...

  I hope someone can help out me!

  I want to improve 320GB HHD to the SSD on my X 230.
  I use mSATA as start the device identified as SATA2 (in BIOS).
  I replaced HHD DSS who is identified as SATA0 in BIOS.
  SSD is defined with the mSATA higher boot priority in the BIOS.

  Before moving to the SSD, I did a system image backup on external USB disk.

  When I start my X 230 with SYSTEM RECOVERY CD, it turns out that mSATA DISK0 and SSD is DISK1 and I can't get the image for the newly installed SSD.

  In fact, I did the same procedure that precedes. When I added mSATA, I followed the same procedure to retrieve the image system mSATA and it worked perfectly!

  What should I do?

  The easiest way to run an mSATA with a 'normal' car (HDD or SSD), the method is to remove the drive you want to boot from. Put the rest drive, restart, then the other disk (of data).

• home theater comes with a browser that can help me to visit any site? BDV E4100

  Home theater comes with a browser that can help me to visit any site? BDV E4100

  Java Espeially based video streaming sites?

  The BDVN7100W has the function of internet browser that you can see on page 55 of its operating instructions. When you use the Internet browser, you can browse the web sites or surf the Internet from . However, the built-in function browser is not intended to replace the functionality of web browsing on a computer. Web pages can not display correctly and some web works like download or record content Internet may not work correctly.

   

  In addition, the home theater bluray system does not support content Adobe® Flash®. If the installation of Adobe flash icon is selected when you use the web browser, the message not supported on the device appears on the screen. Use a computer or other Internet device that supports flash content to view these pages.

  You can only view streaming videos from video sites internet preinstalled or channels internet such as Sen, Netflix, Amazon, Hulu Plus, Youtube and much more by going to the VIDEO of the MENUdevice icon.

  If my post answered your question, please click "accept as a Solution.
  This will help other users to easily find their answers when you browse the site of the community of Sony.

• iPad is not connected to the wifi at home

  Hello

  The iPad is the device at home I have a problem with. And it's the only device that is still home. It loses the connection with the wifii after awhile in the screen lock, and sometimes while using it. I was disconnect and reconnect to wifi to solve the problem. I'm now trying the button of lease renew but I know not why this happens not on my iPhone and my MacBook Pro.

  Thanks for all the ideas.

  Faurie

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• How can I get the speakers to play from the Blue-ray/DVD instead of the TV home theater system?

  My wife and I just bought a Sony Bravia TV and Blue-ray Disc/DVD Home Theatre system. We hung the blue-ray to TV using the HDMI cable and hung stakeholders for the theater House for blue-ray, but the audio single system who will play is TV. I can't get the home theater system speakers to work. How can I make them work?

  Hello Eric,

  Alternatively, you can follow the link below to listen to the sound of television through the speakers of the Home Theater System (HTS).

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1000587

  Make sure that the TV speakers are disabled in the TV menu.

  If my post answered your question, please mark it as an "accepted Solution".

• Toshiba SD - 63HK Home Theater system with remote control problem

  I have a Toshiba SD-63HK home theater system. Suddenly, the remote doesn't work this morning - I changed the batteries and it has no effect. Also tried again taking the DVD Player off the coast of the socket and of suite, and this doesn't have to do anything too. Someone at - it ideas? Everyone knows about similar problems with this system?

  Guess what; you are the first user of this forum that opened a thread on the Toshiba SD - 63HK Home Theater

  This system multimedia isn't known to me, but if your remote has stopped working and the batteries are not the reason for this problem; Then, there must be some kind of hardware malfunction.

  Maybe you can order this remote separately try to search on the internet for this part

• Audio Windows Media Player 11 only playing on two speakers (out of five) of the Home Theater System

  Hello

  I have connected my PC to my Panasonic Home Theater System.  The system has five speakers, but when I play something from my PC (DVD, Windows Media Player, Internet Radio, etc.) audio can be heard on two of five speakers.

  My installation is:
  Windows XP SP 2
  Cable connecting back plug (3.5 mm) audio from the PC to the RCA (red and white) sockets on the back of the Panasonic System.
  Map its RealTek AC97.

  I tried changing various settings on the PC (for example "a 5.1 surround sound" and "a 7.1 surround sound" for the sound card speaker settings) without a bit of luck.

  Thanks for advice you may have.

  Finally got it work. Solution has a setting on my home theater system.  For the entry that I used to, were to select "great surround" mode music. Now its running through the speakers.

• Problem out 5.1 Surround sound via the TV to a Home Theater (Override sound formats supported?)

  Hi, I'm trying out a sound 5.1 on my Home Theater system via my TV via a digital output optical. So the video card (Asus EAH5450) is capable of up to 7.1 output, is connected via HDMI to my TV (a LG 47LH5000) which then returns sound via an optical digital output to my Home Theater 5.1 system (a LG HB965TZ). I have an Xbox 360 connected via HDMI to the TV and sound 5.1 is delivered perfectly to the correct speakers.

  The problem, in my view, is that the computer detects that it is connected to the TV that tells the PC there 2 speakers, so the sound of Windows 7 configuration menu displays just stereo and dolby digital.

  Is it possible to substitute the detection automatic that the supported formats and force the card to output 5.1 sound as I know, he is capable of?

  Thank you
  Martin

  Hello

  Try to follow the instructions to apply the sound card settings and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

• What is the best version of the home theater Blu - ray by Sony system.

  I think of my complete set of products from sony with a new Blu ray home theater system. The Question is what is the best system of cinema house there and BDV-N9100W/B would be the strongest among the products available...

  I selected and compared all Blu - ray Home Theater System listed in the link you have provided with their features and specifications. You can check on the check box to HIDE the so that it would be easier for you to decide and choose the theater system that fits your needs. I hope this helps.

  If my post answered your question, please check "accept as a Solution.

• Vista Home Premium to ultimate problem, after reloading the system. Error message: the upgrade cannot be started. To upgrade, cancel Setup, and then choose to upgrade to a version of Windows...

  I recently had my computer HP reloaded due to hardware failure by Fry technicians.  They have reloaded it back to Home Premium, due to the fact that the initial charge.  I had already updated using a copy legal DVD Ultimate.  Now when I try to update it gives me the message above.  ALSO, when I check the GUI HP, it says my warranty expired 5/02 - OMG, I bought the computer 2/2007.  At they recharge an OLD picture or something?  HOW to solve this upgrade to Ultimate.  I don't want to throw away $150.

  You've never given the full error message.

  So, we have to guess that it is she:

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And your warranty with HP, Microsoft no issues.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the buttons 'Internet' and ' CD/DVD"on the Satellite X 200 - 22U

  Hello

  I use a laptop Toshiba Satellite X 200 - 22U with Windows Vista Home Premium.
  My problem is: I want to create an application to start with multimedia keys ('Internet', 'Disc'). I registered it with TOSHIBA, but the buttons ' CD/DVD' and 'Internet' do not work. In the TOSHIBA Assist Button Manager software, I see "¥" (yen mark) instead of the "------" (backslash) in the path field. I checked it in REGEDIT, where everything is OK, I see the path correctly. But these two buttons do not work. ' Play/Pause', 'Stop', 'Previous' buttons 'Next' work with Windows Media Player.

  Please, help to solve my problem!

  Thank you
  McLawrence

  Have you installed the latest version of Toshiba Assist?
  To do this, look on the Toshiba site and also check if there is a new BIOS.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Satellite A200-196: can't get all speakers to work with the home theater sound Creative T7900

  I run windows Vista Home premium, on my Toshiba Satellite A200-196, and I have a creative T7900 7.1 System.
  I'm not all stakeholders to work. Only the woofer and two front speakers are currently playing a sound.

  The sound in Control Panel option gives me the options in addition to stereo speakers.

  I have no possibility to choose 5.1 or 7.1 speakers and I need to know do I need a software driver (all drivers are appearing to date), or do I have to change to another option, or buy an external sound card?

  I have only two input jacks, input microphone and headphone output. How can I get all stakeholders to work and achieve the home theater experience?

  Hello

  I Don t think that the sound card is capable of doing 5.1/7.1 since there are many takes longer then a "sound-output.

  If I were you, I would buy an external USB soundcard that is capable of doing 5.1 or 7.1 to offer you experience complete home theater.

  Another solution is not existing. Sorry mate.

  welcome them

• Error code 19 - CD/DVD-ROM problem. Please help and read the description first!

  I tried to load my games such as rollercoaster tycoon on my computer by inserting them into the disc drive. Nothing happens. I went to toautoplay and it had all the right settings I wanted. I changed several times and tried to re - insert the disc, but nothing has happened yet. I thought it was a problem of CD/DVD drive, so I went to 'Computer', right-click on Vista64 (C :) and selected 'properties'.) I clicked on the Hardware tab, and then on HL - DT - ST DVDRAM GS20N, my CD-ROM/DVD-ROM drive. I realized quickly that there was a problem, because the box said"device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.» (Code 19) «. I looked at the code 19 on the support Web page and found a link to a Microsoft Fixit, Windows Powershell 1.0. I installed the program, he ran through and he said that he had fixed the problem. I inserted the game once more, but still nothing happens. I went to my CD-ROM/DVD-ROM drive once more and he said that the problem was not resolved. I don't know how to solve this problem. Help, please! (It is not just the CD I try to insert, because none of the many CD I tried to use will work). Should I try to restart my computer?

  Hi meluvcheese22,

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.

  To resolve this problem, you can follow the methods below:

  Method 1:

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article:How to back up and restore the registry in Windows:http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

  You can check the link below: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116

  Method 2:

  a. Click Start, type devmgmt.msc and press to enter. The Device Manager window opens

  b. expand DVD/CD player and right click on the sub element and click on uninstall.

  c. restart your computer.

  d. open Device Manager, click Action,

  e. click on scan for hardware changes. Follow the instructions.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How can I reinstall the dolby home theater?

  I had sound problems with my Aspire V3 (571 G). I heard a noise dry while listening to music and watching videos. It was really boring. I thought it was a problem with the Dolby Home Theater v4, so I went to the control panel > uninstall a program > cinema dolby Home > repair. It does not solve the problem, so I went to C:\ and copied the 'Dolby PCEE4' folder, then I uninstalled the thought of Dolby Home Theater v4 that I will reinstall it by putting the folder to the directory. While it has been uninstalled, I discovered that the problem was not the home Dolby cinema, instead, it was a kind of audio enhancement, so I disabled it by clicking on Audio > manage audio devices > Speakers > properties > improvements and I ticked the box: "turn off all sound effects. The sound is fine, it does not sound dry but now I can't reinstall Dolby Home Theater v4. I put the 'Dolby PCEE4' folder to the C:\ directory and it did not work. I opened the case and found a command called 'install' so I ran the command, but it created only 15000 + (3,79 GB) files in the folder and the home theater Dolby has not yet been installed. So I went to http://us.acer.com/ac/en/US/content/drivers and I entered my name of the model and the OS (Windows 8), but it wasn't a "Home Cinema Dolby' application or a driver available for download. How can I reinstall the Dolby Home Theater v4?

  Think, it comes with the realtek drivers, cause after the failure of windows 8 and install the drivers for it on windows 7, it was the home theater dolby. And the realtek drivers