The design in a horizontal orientation instead of vertical?

Similar Questions

• Should I use the design of producer/consumer model (Instead of Globals)?

  Hello everyone.

  I have a request including several loops in it. A loop reading data series and he analyses for use in the other loops, another loop acquires via DAQmx data and performs calculations on it for use in other loops, the other formats the data from two loops and poster and one last test data. I was wondering if this is a good candidate for the design of producer/consumer model.

  For now, I use global variables to send data from the series and DAQmx loops to other loops. I use motors of the action for the different parts of the program that should be used everywhere, as the serial port. The test loop needs than the most recent data to run his test.

  Thanks for your suggestions!

  The short answer is Yes. If nothing else using queues to pass data will allow your various loops inactive if no data is present. By using globals your curls must continuously survey to see if the data has changed. You always are beter off if you can make your request, driven by events rather than to use the polling stations.

• Naming standards level Modeler of data instead of the design

  DM 4.0.2

  Hello

  Naming standards are defined at the level of the design (in the dl_settings.xml file). Our naming standards do not apply by design, however, apply to all the designs.

  Is it possible to apply the standard naming to DM level? (without adaptation of the rules for each design)

  Joop

  Hi Joop,

  Yes, there is a checkbox for this in the Design Properties dialog box and to check DL settings will be saved in the Directory design and the types of system data directory

  Philippe

• How can I change screen from vertical to horizontal orientation?

  How can I change screen from vertical to horizontal orientation? It will not work after you install the update.  I have an Iphone 5s.

  Swipe up from the bottom of the screen to bring up the control center. Then press the icon that looks like a padlock inside a circular arrow. -AJ

• A problem with the design of the

  Hi all

  Im a beginner with Adobe musejuste a few days ago, but actually I have my own experience with the design of Web sites!

  Today, I am facing a big problem with a Web site under creation!

  When I finished the first home page, home page, I saw that I missed something, wish is receptivity. in fact, I have not now what to do, there are a lot of rectangles and shapes and paragraphs!

  There is this white areas when I pull the horizontal bar on the left, even if I apply my rectangles stretching mode and mode fluid forms!

  and here's an example!

  When full screen mode:

  

  reagent:

  

  and this comes, even the green bar is under the stretch the width of the browser!

  

  I have more problems with delicate design, such as duplication of paragraphs and the inability to convert the navigation bar, like a menu of stationary box etc...

  Please if you can help me, because this is sort of a first job for me!

  I'll wait for your help please!

  Thanks in advance,

  Success,

  Rabi.

  ArnoDHeros wrote:

  Well, thank you very much for your answer!

  I don't know, I ask just 3 days for the homepage, I don't think that I could delete it and stard frm zero!

  but tell me, if I skip this part, empty spaces, it will be a problem for phone users, when I converted to phone available?

  not a phone copy only the page names... you would be rebuild your site for phone (whichassumes that you're going to this option) in responive layout, the rules change

  ArnoDHeros wrote:

  on the navigation bar, how can I convert it responsve box like this:

  Reactive demonstration of Navigation or menu full screen! Note that the navigation is created by a button widget!

  This demonstration of navigation is made to the office and will not work on many phones, my nokia 520 running 8.1 does not open a part of this page in ie, but I use a mini web browser application that can open most of the page without it hambuger image

  

  When you design for the web don't just test your site on office or you will make common mistakes that other office users do... phones are different devices and they do not behave like a chewed down desktop screen.

• Prevents a form of work when the design is changed

  I worked on a form sent to me by a designer, and being new to this particular aspect, it is taken a lot of time. The form was changed just a little bit and I was sent the version updated by the designer. As only a few things changed to 95% of the items I placed on the page could be reused - but when I tried to paste the sections and boxes in the new PDF, they were not in the right position, unlike if this had been done with a 'paste in Place' in something like InDesign.

  What is the best procedure to achieve this? Surely I don't have to start from scratch?

  Open the file with the fields and other things you have added then go to Tools - Pages - replace and select the new file.

  The new pages will be inserted instead of "old", but "everything" will remain in place.

  Edit: mistake fixed text

• Publisher cannot access file InDesign in InCopy CC, while the designer is in the same folder with InDesign CC

  Hello

  That's the problem we have

  When a designer opens a file that is stored on a network through InDesign InDesign share, and an editor trying to open the same InDesign file in InCopy, the error message "this file is already opened by another user or another application. This file can be stored on a network server and cannot be opened until the other user closes it."is displayed. To work around this problem, the designer must close the file in InDesign, and the editor should open the InDesign file in InCopy before the designer will again open the InDesign file using the InDesign application. This issue does not appear in 9.1. Adobe support said that the files are not at the same time in InCopy and InDesign, but it is the function that the product has been designed to accomplish and this problem has never happened before. The files are stored on a network share.

  

  In addition, when an editor is updating an InCopy assignment and a designer click the transfer of update to update their view from InDesign, the error message "the content is locked and cannot be modified." appears. If the designer click OK, the display is updated as expected. This happens even is the assignment is NOT checked out by another user.

  
  

  

  Finally, if a designer adds or updates a graph in a file using InDesign InDesign while the editor is editing the file using InCopy, the editor using InCopy is not update unless they completely shut out of the InCopy application and re-open it, which, because of the above problems is not possible. The only way that the file can be edited in InCopy is the designer to close completely out of the file, for publishers to close, and then reopen in InCopy, how the designer can reopen the case. If some editors are away from their office at the time of the update, the whole process must be repeated so that they are able to open the latest version of the file in InCopy.

  
  

  This question seems to be due to a significant flaw in the 9.2 update version for InDesign, as none of these issues took place before the 9.2 update. A computer currently always has version 9.1 of InDesign to our company and does not have these problems, we lead with 9.2. We tested several configurations of our network trying to deviate from our network as the problem, but the only case in which we experience these problems is when we use InDesign version 9.1.  Also, we never had this problem before the update of InDesign and InCopy 9.2

  Thank you!

  Graham
  

  Post edited by: Graham

  Graham, thank you for this detailed post and screenshots. A group of my friends InCopy customers alerted me on the question and pointed me to this thread. I have passed along some products Adobe InDesign/InCopy and engineers and leaders hope to see their responses here soon (and a fix, fingers crossed).

  In the meantime, the workaround that is not * too * expensive is to use assignments. InCopy users on 9.2 can open assignments without a question, as I can tell. If you use a workflow based on the layout (like most of my clients), all this means, is that you have your opinion of designers one more step when preparing their ID file and that is, to create an assignment which is the * entire * InDesign file, actually it backwards in a layout-based workflow.

  They create the transfer by clicking the new posting at the bottom of the assignments Panel, no need to enter anything in the "assigned to:"on the ground or to change other settings, ensuring that InDesign records in the file of the project to the server. "

  Say they called the assignment "April Issue." If they have already exported stories, simply drag the InCopy content not affected on the April outcome category in the category and then update the assignment (they can right-click on it to update, or choose update assignments in the Panel menu). If they export more/news stories, ask them to export them or drag and drop to this assignment even.

  Notify your users of InCopy do not open the INDD file more. Make them rather go to assignments folder (automatically created ID) project folder and open the assignment file. "April Issue.icma" in this example.

  Multiple InCopy users open the same file transfer simultaneously, just as they could open the same INDD file simultaneously. They have nevertheless check stories in and out as usual. Always only one user of InDesign can open the file at a time.

  The only other change in the workflow is that the designer will have to remember to always update the assignment of each change. Save the changes to the InDesign file does not automatically update the assignment file (ICMA). They might want to assign a keyboard shortcut to this command.

  Anne-Marie

  [email protected]

  Co-host, InDesignSecrets.com

  (oops! Accidentally called assignment files "BCTI" instead of "ICMA." Corrected now).

• Swipe to the next article of horizontal scrolling. framework

  Hello

  If the player arrives at the end of a horizontal frame with scrolling, the shot of the following article does not (or two-finger slide work). Instead, swipe to the next page on the end of a vertical scrolling. frame works fine (v29 viewer).

  One more thing to the difficulty.

  Kind regards

  Yves

  Yves, we have worked to achieve this active behavior, but have not yet completed.

• Means on the design of the phone

  There is a reason why people with iphones have to read the sites side the longest possible hight rather longer than the width side is to say that they read a site with the phone on its side. My site is readable size down to iphone diagonal size on my computer of 3.5 "would be possible to somehow he cut and paste existing pages in phone plan. Resolution of the screen on p0hones might be able to make it unreadable. I don't know anything about it, that I'm looking for advice. My site is mainly text.

  I find the opposite with regard to Smartphone users. The only time I ever use or horizontal and even for almost everyone I know is to use a horizontal orientation only when you love for when sites do not have a mobile version. If the phones have a user-friendly version of phone it is almost always in a vertical position. It's just the natural way to hold a phone.

  Most people use vertical orientation for the most part it is because almost all phone apps re built for vertical orientation (although they will work in horizontal) so that's what users are accustomed.

  But back to the phone why websites are scaled down. It is not because what you leave out is worthless, it's because:

  1: most of the people still have to pay for data transfer on their phones and usually have a cap which is included in their plan. Exceed the permitted amount becomes extremely costly to most of the suppliers.

  2: mobile data transfer is way slower than wifi or your connection at home/office. Mobile data transfer can still consider too close to dial-up speed.

  3: it for the elements like videos, photo galleries (unless it's a site of photographer of course) are left out. They take just too much time to load and can be expensive for the user.

  4: no one will read the pages of text on a phone either. The people who are their phones are more liekly to accurate information quickly. You can still have a link to the site of office of your mobile site that users can click on if they want more information than what he what's on the mobile site.

  5: another big reason why mobile websites are different is because you have already tried clicking on a text link of small size with big fingers on a phone? Very frustrating. Thus greater need of buttons.

• Color of police present in the Design tab, but not when viewed or downloaded

  This has been me angry the last days and I can't seem to find any info on this subject. I found a site, but they want you to pay a subscription to view the answers. Basically, my question is, when creating a site that I can see the police of colors in the Design tab, but when I download or even look at the page in IE 7 or Firefox the font color is the default value of the page, not what is described in my code (attached) CSS. I'll admit I'm trying a new style of page. I normally do a shell and use iFrames for content, but I wanted to be more search engine friendly so I use Div scrolling layers instead. I don't think that's the question, but I could be wrong. Any help explaining why this is happening and how to fix it would be greatly appreciated.
  
  

  I fixed it. The problem came from a library that I had on the page. I had 3 different styles, he listed, and one of them was style 3 then he drew the color and the make-weight of one as apposed to the style 3 in my CSS of the page. I went to my library and renamed the 3 different numbers and bingo, my policy is that showing red when downloaded.

• How can I select a web address so that someone can simply click on it to go directly to the designated address?

  When you compose an email, how do I highlight a web address and convert it to a link so that someone can just click on it to go to the designated address?

  According to the help article (hyperlinks in Messages does not work), Thunderbird needs to convert the URL a clickable link while it sends the message. Can you confirm this by composing a message to yourself and see if it works?

• Caveat "the formula uses a Boolean value instead of a number" would dismiss

  Hello!

  I do a "Calculator" to get estimates of price for the projects, according to which processes the customer wants.

  Rates for each process are added in another table, and I use the list of control buttons to enable or disable the various processes.

  Here is an example of a formula:

  

  D3 determines if the part of the project modeling is performed, so the price will be or will not be calculated.

  If D3 is true, the result is multiplied by 1, give me a positive amount. If false, the result will be multiplied by 0, 0, so nothing to add to the final cost he send me some.

  Same for B4 in the same formula.

  This formula is repeated all over the chart, with minor changes to add more complex options, but it's all the same.

  Everything works fine, but I got those blue triangles warning me of "the formula uses a Boolean value instead of the number". That's fine with me, I like the use of the Boolean types, and they make my formulas work well in my calculator. How can I reject the blue triangles?

  

  They are a little annoying. And they do not really correspond with the general style of my calculator.

  I saw someone talking other types of formulas, with SEARCH and yews, but who is really complicated and I don't know how to do... Especially for a simple calculator

  Is there a way to simply do not display warnings?

  Using the version 3.6.2 on a MacBook Pro, OSX El Capitan 10.11.5

  Thank you!

  Hi Sinshassan,

  I don't know a way to escape your blue flags except to make a formula which is consistent with the expected numbers. It is not difficult.

  

  My formula D2 = yew (AND(D1,B2), C2, 0)

  The IF statement tests the two D1 AND B2. If they are true, then it indicates the value of C2 your carbon Modeling::High Poly #1, if one or both are false (unchecked) then 0 is displayed.

  Give it a try.

  Quinn

• All the pop popup in new tabs instead of new windows.

  All the pop popup in new tabs instead of new windows. I don't know why, but this happens not just a site, but all of them.

  Try

  • Firefox-> Options-> button. [X] tabs open new window in the tab instead
    (Click for-Select if it already has a tick/check)
  • See the tab preferences and settings

• Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  OVERVIEW
  Introduced	June 2012
  Discontinued	October 2013
  Model identifier	MacBookPro9, 1
  Model number	A1286

  Edit: in fact this model number is used for some units, from a late model ' 08.

• Person to contact Toshiba regarding the design and engineering of ideas

  Hello

  I want to contact toshiba to open a company speak with new ideas about the design and operation of laptops.
  I have pictures and images of these ideas.

  Can someone direct me to the right direction?
  Thank you.

  If you prefer please email me directly: [email protected]

  Hello

  First of all, I must say here it s only forum user. You'll be a really lucky guy if someone from Toshiba will be the response to your ad or the means will contact you directly but hope dies last. ;)

  Are you from Europe?
  In any case, I think the best thing is if contact you Toshiba local basis in your country. But the question is if you can contact the guy because normally your interlocutor is a rather authorized Toshiba service provider.

  Of course, you can try it and look for an email address. Maybe you'll find something on Toshiba page in your language. :)