The Deskjet D2360 driver installation error

Similar Questions

• Intel HD graphics driver installation error: "computer does not meet the minimum requirements.

  Hello

  I tried to update the Intel graphics driver in my notebook using sp55098.exe , but the system returned the following error:

  "This computer does not have the minimum requirements for installing the software.

  I have the following: dv6-6b05tx laptop computer running windows 7 pro 64

  It's the device I am trying to update:

  Intel HD Graphics Family
  Current driver date: May 7, 2011
  Current version of the driver: 8.830.6.3000

  I tried the drivers on the Intel site, but they do not work either.

  Help, please.

  Thank you very much.

  PS

  I managed to update the drivers of AMD Radeon HD 6700M using this link of guru3d.com.

  But I can't find a similar solution for the Intel card.

  Hello:

  Please read the notes on the AMD driver file...

  Description:

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  The Intel driver is only for the models with only the Intel UMA graphics adapter.

  You must live with what version of the video, Intel is in the AMD driver package.

  Paul

• Driver installation error: the system cannot find the specified file.

  I recently bought a Logitech G930 Wireless Gaming Headset and I don't get the "system does not have the specified file." When I try to install the drivers for the device.

  I installed the software on the CD and the software that I downloaded from the download page on their Web site. The drivers for the volume etc. scroll work, only Audio USB driver that does not work. I tried to clean up the temp, restore to a point of restoring etc., same problem. Unable to get all the sounds so far. I have no changes that would address the issue that I know, and I've been redirected here by Logitech support staff that I was able to install it on another PC.

  Help is very appreciated.

  I solved.

  Created the
  C:\Windows\System32\DriverStore\FileRepository\lgsh_usb.inf_amd64_5d791964aedb188e\
  folder repeatedly mentioned in the newspaper and copied all the files there. Then do the driver installation program find the driver in the C:\Windows\System32\DriverStore.
  Credits http://www.ocztechnologyforum.com/forum/showthread.php?106837-Cant-install-driver&p=765465&viewfull=1#post765465
  ^^ Kudos to this guy.

• Qosmio F60 - Intel graphics driver installation error

  Hello

  Some time ago I managed to destroy my Nvidia 330 M graphics card.
  I don't know what exactly happened, perhaps overheated, I just BSOD and then my system reported ERROR 43.

  I reinstalled entire windows by default with toshiba drivers but without success, the card did not work.
  I uninstalled my laptop Nvidia drivers, so my graphics card is "Standard VGA graphics card".

  I tried to find a way around, and I realized that I can use the graphics processor instead.
  I have Intel i5 - M430, so I tried to install the graphics driver intel HD only to get an error "does not meet the minimum requirements of the system.

  Can someone help me with this problem please?

  Hello

  Processor Intel Core i5 - 430 M (3 m Cache, 2.26 GHz) takes in charge the first-generation Intel HD graphics unit.
  The driver could be downloaded from the Intel driver page and you will need to choose the right
  https://Downloadcenter.Intel.com/

  Graphics-graphics drivers for laptop-Intel Core processors with Intel HD graphics card > >
  Now you should get a list of the different drivers for different system.

  Choose and download the latest driver for the system you are using.
  Note: choose the ZIP package.

  Then uncompress the package somewhere on the HARD drive (I prefer the office). Then go to Device Manager and choose the graphics card (Standard VGA graphic card)
  Now choose the driver installation and use the Advanced installation. This allows you to point to the driver package that you have unzipped on the desktop.

  This installation procedure should work very well because he worked also in my case.

• LaserJet pro 200 driver installation error

  We have a Server Windows 2012 that I can't seem to get the driver printer laserjet pro 200 M276nw on.  He goes through the process of driver download and in the end gives me one error of installation - no further details.  Also, trying to download the print driver, it seems locked somehow all printers on the network.  I had to reboot the server for the printers run again.  Any ideas what could be the problem?  I've disabled our anti-virus and tried to download the driver print, but still got the same message.  Currently, the only way I can get the Laserjet Pro 200 to print is to use the universal print driver.  Thank you.

  3022 wrote:
  

  We have a Server Windows 2012 that I can't seem to get the driver printer laserjet pro 200 M276nw on.  He goes through the process of driver download and in the end gives me one error of installation - no further details.  Also, trying to download the print driver, it seems locked somehow all printers on the network.  I had to reboot the server for the printers run again.  Any ideas what could be the problem?  I've disabled our anti-virus and tried to download the driver print, but still got the same message.  Currently, the only way I can get the Laserjet Pro 200 to print is to use the universal print driver.  Thank you.

  Is it the driver of your trying to get?

  Pilot product page...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4138 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5097654 #n187

  Driver Windows 2012

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kJ-107843-4 & CC = US & DLC = in & LC = on & os = 4138 & Product = 5097654 & sw_lang =

• HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

  I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

  HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

  In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

  Below is a screenshot of what I mean.

  

  Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.
  
  The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.
  
  I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

• Creating a program the evolutionary IVI driver installation problems

  I have problems when you try to create an upgrade for an IVI driver installation.
  I created the installer by using the creative installer included with LabWindows/CVI 2010 IVI. In my case, I have two versions of the IVI driver DLL and configuration (1.0 and 1.1).
  1.1 - the installation program was created using the option "install existing rebuild" of the creator of the installer.

  My problem is the following:

  • If the driver of the IVI is not installed the 1.1 - installation is completed without error.
  • However, if the 1.0 driver is present, the 1.1 installer gives me the error message following just at the beginning of the installation:
    "Setup has detected a third party IVI driver in the directory C:\Program Files (x 86) \IVI Foundation\IVI\Bin. Please uninstall the existing driver before proceeding with this installation. »

  I noticed the things so far:

  • The UpgradeCode MSI remains the same for both configurations (as expected). This seems to indicate that the installation program supports upgrades.
  • The installer contains a DLL (NiIviDriverDetection.dll) used in a CustomAction to the 3rd party.
    What this DLL seems to do, is to perform a control version of the currently installed driver IVI DLL (1.0 in my case).
    According to the results of this audit, the installation process is abandoned.

  If everyone has noticed this behavior or anyone has any suggestions on how to create an IVI driver installer which can be upgraded without uninstalling the old version first?
  Maybe I put just an evil version information field, but I do not know that which (if any)...

  Advice would be greatly appreciated!

  I seem to have found a solution:

  The problem is that the MSI CustomAction, seeking a third drivers IVI (DetectAction.C1C4DD2F_AD86_44E6_BA47_FC41E5C0DAAF) is performed before the FindRelatedProducts Action.

  So the DetectAction is not ignored if an older version of the IVI driver is located (looking at the MSI tables clearly was NEITHER).

  Move the sequence numbers of the 103 to 107 behind the FindRelatedProducts Action InstallExecuteSequence shares both InstallUISequence tables (for example starting at 370) will make it possible to do an upgrade of an IVI driver installation.

  This can be accomplished using the Orca tool included in the Windows SDK.

• not sure: the new hard drive installation

  I have a Desktop allows a hard disk which is a failure.  F9 during boot diagnostics say its bad.  I just got the HP recovery disk and I'm not sure that 'when' to instaqll them.  I put the OS on the new hard drive and then first run the recovery or recovery disk?

  If you have the recovery disk set for this PC, run recovery on the new hard drive.  To install everything back like it was new again.  The installation of the OS process is executing the recovery.  Install the new hard drive, and then run the set of recovery disks.

• the driver installation error file not found

  I have a mp3 player that works very well on my wifes XP system but when I try and use it with Vista I get error installation driver... file not found. I tried all 3 usb ports... no luck.  I uninstalled the device... nothing.  Then I tried to plug in a USB stick... of the United Nations recognizes the device. I tried on everthing that I found online.  I would like to reinstall Vista but I have it on CD, I don't have the product code.

  Rick

  Are you sure you have the correct drivers for Vista and that the device is compatible with Vista?  Just because it works on XP there's no guarantee that it will work on Vista (especially if you use XP drivers).  What is the manufacturer, the brand and the model of mp3 player?  What version of Vista are you using?

  Please answer these questions in your answer.  Also check with the manufacturer for drivers updated firmware and/or software compatible with your device and your version of Vista and try to install them and see if that makes a difference.

  Thank you.  I look forward to your answer with responses and progress that you make with the drivers.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DeskJet 3720: Driver Installation fails

  Base driver sw installation fails with the following error:

  Call to DriverPackageInstall returned error-536870329 for package ' < C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf

  Thanks PCalaminci. I got exactly the same error and same configuration (Win10 x 64 with bitlocker active). The solution is as PCalaminci suggests: temporarily disable the driver signature digital verfifaction (looks like HP delivered a driver with a valid Publisher unknown/no signature that is the cause of the installation of the bomb).

  Note: To temporarily disable checking of driver (on Windows 10) signing it is easier...

  1. In Windows, go to PC settings (you can search for it in the start menu).
  2. Click on 'update & recovery' on the left side.
  3. Click on "Recovery" on the left side.
  4. Click "Restart now" button under Advanced Boot.
  5. Select Troubleshooting-> advanced-> startup parameters and press Restart
  6. Press the number corresponding to the entry 7 "disable driver signature enforcement".
  7. Install the drivers. After your system restarts again once you won't able to install any unsigned drivers until you repeat steps 1-6.

  Above works even if you have your hard drive encrypted with bitlocker (you need not type in your recovery key).

• Win 3G on Portege Z930-108 8.1 driver installation error

  Hello

  I installed 64-bit Windows of 8.1 and when installing the driver 'H5321gw Ericsson for TOSHIBA' not recognized me and I get an error. I tried to install the version for Windows 7 and does not work.

  I can tell it that the appropriate driver and where can I download it?

  Thank you!

  Hello

  What do you mean exactly by did not recognize me?
  What exactly happens if you start the installation?

  Driver Toshiba EU page provides 3 G driver Ericsson 8.1 victory and this driver works for sure!

  You should be able to download the package 3gdrv - 20131021133141.zip
  This package contains the TC00569300A.exe file.
  It is also a package, so you should be able to unpack this TC00569300A.exe by right-clicking on the file and choosing the option: extract or unpack here. I use the WinRAR tool to unzip the zipped packages.
  After the exe was unzipped, you will see the setup.exe.
  Simply run this setup.exe to start the installation.

  In Device Manager, you should be able to see the 3G device/module.
  Also, you should be able to install the driver in Device Manager by using the Advanced installation procedure.

  Here the direct link to the 3G driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/3gdrv-20131021133141.zip

• Failure of the system recovery: Windows installation error message

  System: HP Pavilion a6554f

  OS: Windows Vista

  I replaced a hard drive failed (replaced 1 TB 750G).  Used my system recovery disks.  Recovery system worked well.  After the recovery is complete, Windows began to install and finally comes up with the message: "installing Windows could not configure Windows to run on this computer hardware."

  Recovery tried again, same result.

  Any suggestions?  Diagnosis recognizes the processor, the memory, and drived hard (all past).

  My apologies.  Another thread has answered with the same problem I had.

  Here is the response copied from this thread...

  I used a builders or OEM copy because the owner could not find their burnt copy and HP is no longer a media available for this model.

  Below you will find an article I googled describing the error and the fix.  Simple.  Once, I changed RAID on AHCI, no problem.

   

  Here is the Solution!

  Here's how:
  　
  Option 1: (as Microsoft says, http://support.microsoft.com/kb/2466753/en-us)
  -Configure your BIOS, change the method to control RAID AHCI or IDE / ATA
  -Get your chipset AHCI drivers from intel and load them when the installation program asks you (onscreen that choose you where to install windows, there is a button labeled as 'Drivers')

  the url is http://www.vistax64.com/general-discussion/295950-help-windows-setup-could-not-configure-hardware.ht...

  Thanks to everyone who offers great help!

  Darryl

• HP ProBook 4530 s: need help in the intel graphics driver installation R Hd!

  Hello

  I recently updated my windows for windows 7 to windows 8.1, after installation, I discovered that the screen was too big and he only microsoft basic display adapter, but there was no graphic driver intel.

  When I arrived to support by internet, I was download the R intel hd graphics driver, but when I tried to install it on my pc it shows nothing but errors errors only. Right now am really stuck, I can't play a game.

  Please I really need your help, what should I do?

  Here is the screenshot of the eror!

  b

  Hello:

  Have you tried the driver W8 support for your laptop and driver page?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060882&swItemId=ob_112141_1&swEnvOid=4132

  Your laptop does not have a graphics adapter Intel HD 4400 this is why the driver doesn't work.

• Drive Installation error message

  I tried to get this question an answer for 4 years now.    I try not to use anything other than the original player and download it.  The version that I said its an older than the installed version (no idea how it happened).    It's the rror message I receive.   I need to know how to fix it.

  problem signature:

  Problem event name: BEX

  Application name: AcroRd32.exe

  Application version: 15.17.20050.61080

  Application timestamp: 5774facd

  Fault Module name: AcroRd32.exe

  Fault Module Version: 15.17.20050.61080

  Timestamp of Module error: 5774facd

  Exception offset: 000eaa4b

  Exception code: c0000417

  Exception data: 00000000

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Information has additional 1: 853

  More information 2: 853a97648cd021fe2289f2ee4134b5a2

  Additional information 3 c: 69 9

  Additional information 4: 69c916c84b91525cf27033046f55f292

  Read our privacy statement online:

  http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\System32\en-US\erofflps.txt

  Hi deirdreann9 ,

  Try to do the following:

  Cleaning tool 1 - run which can be found here: http://labs.adobe.com/downloads/acrobatcleaner.html to remove traces of drive on the computer.

  2 - restart the computer

  3-download Adobe Reader here Installer: Adobe - Adobe Acrobat Reader DC Distribution , you can download the Version 11 but also DC (latest version).

  4 - Press the Windows key + R on your keyboard, type the command, find the system, then click on Advance system settings.

  5 - running > click Settings > click the Data Execution Prevention tab and then click on turn on DEP for all programs and services except those I select.

  6 - click Add, locate the executable file for Adobe Reader and add it and click on apply.

  Let us know if you face any problem.

  Thank you!

  Shivam

• EzCAP 116 USB 2.0 TV USB EMPAudio driver installation error.

  Just installed the drivers for a 2.0 ezcap USB video capture device and also the Arcsoft showbiz software. For some reason any my laptop does not recognize the driver audio 64-bit when I plug the unit gives a driver error audio ezcap 116 usb EMP. Fine video drivers

  When I try to capture the video, the software does not record sound and given no chance to change source resulting in a painful white noise that is emitted.
  Tried to re install the drivers and using another USB port with the same result.
  I have a laptop vaio Windows 7
  any ideas?

  Hi RickRoe,

  It seems that you are facing problems with video capture using EzCAP116 USB 2.0 Video Capture.

  I suggest you to consult and follow the steps from the link EzCAP116 USB 2.0 Video Capture Support and check if it helps.

  http://www.ezcap.TV/EzCAP116-drivers?ZENiD=5vbs59qnd75j8gph0ah03uc635

  For reference:

  http://www.ezcap.TV/Forum/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.