Win 3G on Portege Z930-108 8.1 driver installation error

Similar Questions

• Portege Z930-108 - collapsed work SD card reader

  Hello

  I bought a ultrabook Portege Z930-108 with Windows 8 (x 64).

  A week before, the card reader stop working (I tried different cards).
  I updated the drivers from RICOH card reader controller without resolving the problem.

  Note that Device Manager indicates that the controller is installed ok and the unit works without problem.

  Do you have any idea how I can check that SD card is not vented?

  Best regards
  Kostas

  > (I tried different cards).
  Die which cards you use exactly?

  The SD CARD slot supports the following cards:

  SD card - 8MB - 2 GB / microSD (with adapter): 512 MB - 2 GB
  SDHC - 4GB - 32 GB / microSDHC (with adapter): 32GB
  SDXC - 64 GB
  Mini SD - miniSD (with adapter): 32 MB - 2 GB
  Micro SD - microSD (with adapter): 512 MB - 2 GB
  MultiMediaCard - 8MB - 2GB

• Partition of hibernation of the Portege Z930-108

  Hello

  I just bought the Z930-108 and I found on the SDS (128GB) a partition called hibernation, but the normal system disk, there is also a hiberfile.sys.

  (1) is it the same function for both?
  (2) is the hibernation partition does not work?
  (3) can the hibernation partition be incorparated in the system partition to have more available space?
  (4) the removal of the hibernation partition would invalidate the recovery process using the SSD partition?

  Thank you!

  Hello

  AFAIK the hibernation partition is used by the Windows system, and he needs this partition to wake the laptop much faster than usual hibernation mode
  I thought hiberfil.sys had taken the place of suspension on disc, but it seems that this hibernation partition is much more powerful. I wouldn't delete this partition if you want the Hibernate the laptop.

• Portege Z930-102 - Igftext.exe caused an error

  We have a problem with ultrabook Toshiba Portege Z930-102.
  Ultrabook is connected with Toshiba Dynadock U3.0 with secondary DVI monitor like dispay.

  Ultrabook comes preinstalled with WIn7 Pro X 64 from Toshiba with the last worm Intel display drivers. 8.15.10.2712. the problem occurs in only one scenario:

  1 ultrabook is closed and connected to Dynadock with external DVI monitor, windows is rebooted the system restart and windows connect to the domain we have the message that * caused Igftext.exe* and error one, then the message that the Igftext module has stopped working. We tried the drivers from Displaylink version 6.2 update to the new version 7.144152.0, but nothing has changed.

  This Ultrabook is already deployed for VIP and windows of opportunity for quick testing.

  We are oppened to any constructive suggestion, thank you in advance.

  Hello

  It seems that it's not laptop problem.
  Maybe his Intel issue because I found this thread in the forum Intel and it seems that this Intel igfxext.exe process hangs on mobile phones from other manufacturers too.
  http://communities.Intel.com/thread/31920

  I found another suggestion: just rename the file igfxext.exe to something like * igfxext.dat* and restart the laptop. It would be interesting to know if that helps.

• Portege Z930 - need to Win8 driver for Ericcson 3 G

  I've updated my Toshiba portege Windows 8, and everything works fine, except the Ericcson G 3, I think and it doesn't work,
  What should I do?

  Thanks in advance

  > except the Ericcson G 3, I can't find, and it doesn't work.
  Not even this one?

  Try to test and send feedback.

• Portege Z930-145 - unreadable HARD drive - how to restore Windows 8?

  Hello...

  I have buyed my cell phone 6 months ago in an online store.
  A month ago he kissed the sky and was ready for the scrap of hard drive. The support of the seller wrote, that it does not appear a warranty issue.

  Now I can not install the original OS Windows 8, which was preinstalled. Now, I have buyed a new hard drive and in time I use Ubuntu Linux. But I want to use Windows. No, my laptop has a license code.

  What can I do?

  Thank you...

  Sorry for my bad English. I am Spanish.

  Before anything please contact Toshiba service provider in your country and explain the situation. AFAIK you should get the new HARD drive.
  List of service providers that you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
  If you like it and I hope that they can explain how it works exactly.

  Back to your question: each laptop with pre-installed operating system (factory settings) a small tool which create recovery media. This recovery (DVD or USB) media can be used for the original recovery image installation. I assume that you did not create this recovery media, right?

  Anyway, if you want to have the settings to factory again, but you don t have recovery media you must order on https://backupmedia.toshiba.eu/landing.aspx

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G

• Portege Z930: Loss of Fn keys after upgrade to win 8 - can't turn WiFi switch

  After several months waiting for my hour I just began my Portege Z930 - 11G for Windows 8 Pro upgrade.

  To a large extent, it went to the plan except that, after execution to display the Assistant Toshiba Upgrade I lost the Fn key and about half of the keys no longer seem to work at all.

  The only key I've ever used on a routine basis is the Fn + F8 option to activate the power switch WiFi.

  So now, I can not turn on WiFi on the computer.

  It must, surely, that there be a way to do it, but I'm not. Does anyone have a suggestion? I'm OK for now because I have a local cable system in the House, but once I get out on the road I will fight without WiFi.

  Before running the wizard upgrade of the Fn key grew up the key appear in the upper part of the screen and I want to surely I had turned on WiFi right here.

  The Fn key utility offers very little control of the Fn keys. It does not offer the possibility to do anything else than to disable five notifications screen for keyboard backlighting, power plan, touch pad and cursor overlay digital overlay.

  Any help gratefully received.

  Andrew

  > So now I can not turn on WiFi on the computer.
  First of all, you can enable and disable the WiFi using the function key, but you can also activate the WLan settings of Windows 8
  Key Win + C-> settings-> change PC settings-> wireless

  Now, you can use the cursor to wireless devices to enable or disable the WiFi network.

  But to get the FN button work you need to install the + Toshiba function key + Utility for win 8 and + Toshiba system driver + to win 8

• Portege Z930: How to install Win 7 after the installation of Win 8

  Hallo!

  There are a few weeks upgraded Toshiba Portege Z930 to Windows 8. Before the upgrade made the backup of Windows 7 on USB flash and it worked. Now recovering Win8 to Win7... Recovery starts fine - choose 'out of box' recovery and get ERROR 05-0172-0001.

  How to return to Windows 7?

  Hello

  I guess that your BIOS contains the option to switch between the UEFI and BIOS of the CSM.
  It must therefore return to the CSM BIOS and must disable secure boot if it has been previously activated.

  Then you can reinstall Win 7

• Portege Z930-146: BSOD running Win 7 64 bit - support pointers and advice

  Hello

  First post following the latter (academia / business) purchase of a Portege Z930-146 (serial number XC141056H, short PT235E part number).

  Configured the pre-installation software 64 - bit W7, local installed, delivery to the primary user (the boss).

  User reports 3 BSOD in a few days - I have the mini-decharges and made first order analysis using blue-screen display:

  PAGE_FAULT_IN_NON_PAGED_AREA (ntoskrnl.exe)
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (dxgkrnl.exe)
  MEMORY_MANAGEMENT (ntoskrnl.exe)

  We really are the guys from UNIX, so it is not familiar territory.

  I just updated the BIOS but now have a long (50 +) list of possible drivers also be updated. One at a time to download and install?

  I ran the diagnostics memory and disk - without errors or warnings that are reported.

  Can someone identify a likely problem, or direct me gently in the direction of the road to official support of Toshiba please or suggest next steps?

  Thank you in advance,

  GLM

  Ntoskrnl.exe is a Microsoft kernel boot and the dxgkrnl.exe seems to have something to do with the chart.

  I recommend to check if the update of the display driver would improve the performance of the system.
  Then visit the Toshiba UE driver page, select the Satellite Z930 PT235E and download the latest display driver Intel.
  Z930-146 was equipped with chip Intel HD Graphics 4000, so you need the Intel driver.

  You can also try to download the driver directly from the Intel page since they always provide the latest version.

• Portege Z930 - downgrade to Win 7 - now, FN keys do not work

  I have a Portege Z930. I have this ultimate decommissioning of Win8 to Win7 64.
  whitch driver, I need to install to this keys FN +?
  Thank you...

  Install an additional package of Toshiba. This package contains several tools and utilities, and one of them is utility to flash cards (when you press FN).

  Test it.

• Portege Z930 - Downgrade from Windows 8 for Windows 7

  Hi all

  I have serious problems with my new laptop Portege Z930-138. I wanted to downgrade from Win8 to Win7 and transferred my old iso of Win7 on a bootable USB.

  I changed the BIOSsetting CMS BIOS in order to boot from USB and it worked.
  But later, I deleted all partitions on my HARD drive in order to have a primary partition where to install my old Win7.

  However I can't do!

  Now I have 1 GB 119.1 unallocated space and there is no way to create a new partition from it.
  Also when I try to install Win7 it says the disc's style GPT.

  I also tried to convert it from the command prompt, but it does not work.

  You guys have any ideas what to do?

  Hello

  Recommend the reading of this Toshiba HowTo:

  Steps to install Windows 7 on a Windows 8 device *.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EX0002R01.htm

  If you follow the steps described in this document, you should be able to install Win 7

• Upgrade Windows 8 Portege Z930 the CD comes with

  Hello

  I just got my new Toshiba Portege Z930 pre-installed with Windows 7, along with two discs Windows 8 Pro. It is a good pc, but with no cd player, how do I install Windows 8 on the disks?

  Sincerely

  Post edited by: Toshibanewbie

  > but with no cd player, how do I install Windows 8 on the disks?
  You can use an external USB CD/DVD drive to boot from disks to win 8.

  Or you try to install the 8 Win using a flash USB memory sik.
  But in order to install the memory flash USB one Win 8 Win 8 ISO (image) files is necessary.
  In addition, you will need to create a bootable USB. You can do this by using the Windows 7 USB/DVD download tool

  I recommend using google for more details

• Portege Z930 - FN keys issue - showing no no menu on screen

  Hello

  I have toshiba portege Z930 and my function keys worked until I installed YAC (yet another cleanser) to get rid of some malware, which worked, but the problem is that even after uninstalation, function keys is broken:

  FN + y/z which should highlith the keyboard does not work (I have installed what is called the "function key" for now, that works as well with the FN 1, 3 FN, FN 4 and 3 + 4 to volume)

  but others simply does not work:
  FN + ESC (mute)
  FN + F2 (eco mode)
  FN + F5 (control switch)
  FN + F8 (wifi/bluetooth switch
  FN + F9 - 12

  Could someone point me to good drivers for this? Thank you very much
  Karolina

  What Windows system is installed?
  In the case of Windows 7, you need to install Toshiba Value added Package
  In the case of 8.1 to win, you need to install the Toshiba system parameters.

  But be careful: some FN key features depends on the 3rd software. For example, you will not be able to use the FN + F2 if eco mode ECO Utility isn't installed.

  But why n t give you the OS at the beginning point of time until you have used the cleaning tool?

• Impossible to download the BIOS for Portege Z930 - 404 error

  Hello

  My tool tempro says that there is a new BIOS for my Portege Z930.
  But the link does nothing.

  If anyone can solve this? Or have the correct link

  Thank you
  Markus

  You can use this direct link to download the BIOS file
  [Update BIOS 6.80 - WIN for Portege Z930 | http://support.toshiba-tro.de/tedd-files2/0/bios-20140212101921.zip]