The display to connect to the system?

Similar Questions

• System suddenly turn off when the external display is connected

  I have problem with my system. every time I connect a projector or a HDMI my system stays for a short time and shuts...

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  1. The computer completely off, or only the monitor turns off?
  2. You get an error message or a blue screen while the system is turns off? If Yes, what is the exact error message you get?
  3. What is brand and model your computer?
  4. Apart to plug the projector, does this problem occurs in all other conditions also?
  5. What happens when you try to turn on the computer later, with a projector connected?

  I suggest you to check if the computer shuts down completely or only the monitor turns off. If the computer shuts down, the problem may reside with the graphics card driver that fits inconsistent or has become unstable or corrupt. Therefore, I would suggest trying the following steps and check if the problem persists.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  Hope this information is useful. If the problem persists, please post back with answers to questions for assistance, we will be happy to help you.

• I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots

  OS - win7 family Basic 64-bit

  anti virus-macfee
   
  Original title: I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots. MacAfee antivirus, 1 GB Radeon graphic

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Satellite1900 dull display at startup of the system + lack of functions in the system tray

  Satellite 1900-803 OS - XP - Home (SP2) has developed an error at startup, it starts, but has the matte screen (the equivalent of the lowest screen brightness setting) and a few icons missing in the system tray in the task bar, (ie. icon remove a security device, mousepad icon & hide the unused icon button), only fix I found is to do a system restore , that everything returns to normal, icons etc, restored once the screen not more problems occur even after hibernation, (restore point should be a point of automatic system generated manually created)

  Have you checked the drivers to display, bios updates, control panel in utilities to display etc., all seem correct and up-to-date, can anyone help, I checked the forums but not found anything similar, I checked, the reset screen FL inverter connections, but no change, dysfunction on AC or battery.
  suspect a software problem? BIOS problem?
  machine is 4 years old, and no real probs so far a complete system don't have reinstall (to the iradicate virus that I couldn't get rid of all ok after that, enough compatent during the disassembly of the machine and basic repairs but depths of software are becoming my cleats of knowhow:D about 1 year ago
  any help would be received with gratitude
  concerning
  Iain

  Hello

  I read a few topics on missing icons in the system tray. It seems that it s is a windows bug.
  Please check these messages from the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14392
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15065

  Maybe it helps.

  I can t say too much on the matte screen. Of course, if the Fl inverter is dead the display appears dull but you issue sounds a little different. The problem doesn't persist all time. That's why I think that it s not a frequency inverter. Usually, the Toshiba power saver is responsible for the brightness of the screen. You should check the settings of the single power supply modes. Maybe you switched between different modes of energy and the brightness of the screen has also been changed.

• Xbox will not connect to xbox live and said "Uh Oh, seems to have found a bug in the system.

  So I went to a game on my xbox and it froze, I so stop my xbox 360 and turned it. When it was turned on it says not connected to xbox live, so I did the steps and plugged but it got to the last step where it connects to xbox live, and it said unable to connect to live. So I went on the xbox website and I registered and it says "Uh Oh, seems to have found a bug in the system and it tells me I have no friends and it does not display my photo on the site...» It happened once in October, but has not occurred again until now. I need help please to find what's wrong.

  Try Xbox support:
  http://support.Xbox.com/en-us/

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you connect on Vista, get message of the system cannot find the specified file

  the above is displayed. whenever I connect. I can do everything works, that's when I hit print, save appears and the file has been converted to a tiff file.  None of the office products will be printed.  I have the office 7 wiuth Vista 32 OS.  I went throgh HP, but there seems to be a problem in office

  * original title - MOM.implementation, Version = 2.0.3182.4658, Culture = neutral, publickeytoken = 90ba9c70f84672e' or one of its depenencies.  The system cannot find the specified file *.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

  Original title:

  Office blocked in the classic theme.

  This morning when I started my computer, I noticed that it displays the following error message:

  "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

  I went through the event log and found three errors:

  Name of the error: Service Control Manager
  Event ID: 7022

  "The Windows Audio service hung on starting."

  Name of the error: Application Popup

  Event ID: 875

  "Pilot atksgt.sys has been blocked by a load."

  Name of the error: Service Control Manager

  Event ID: 7000

  "Atksgt service failed to start due to the following error:
  This driver has been blocked by a load.

  There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

  Any help is appreciated.

  I would like to use system restore to set up Windows in a few days.

• BlackBerry Smartphones Blackberry Media Sync continues to display 'Please connect a Blackberry smart phone' when the Blackberry Storm is connected to the PC

  About a 2 months ago when I would like to connect my (the first storm) blackberry storm to my computer via the USB cable supplied with the phone, I was able to transfer music from my computer (itunes) to the blackberry via Blackberry Media Sync with no problems (open Blackberry Media Sync, connect blackberry to the computer via the USB port and screen Media Sync would change so that I could sync to the blackberry storm music). I didn't even have to install Blackberry Media Sync in December 2009

  But now after I connect my Blackberry Storm to my computer, the screen of Blackberry Media Sync does not change and continues to display "please connect a Blackberry smartphone. I tried these tips I found online:

  1.) several reboots my computer (windows vista)

  2.) update/reinstall Blackberry Media Sync, then by restarting my computer

  3.) reconnection from blackberry to the computer, then open Media Sync

  4.) Open Media Sync first and then connect the blackberry to the computer.

  5.) installation BlackBerry USB and Modem drivers (even if I can't find the USB driver for it under the Universal Serial Bus Controller when I check in the Device Manager when you go to control panel – system and Maintenance – Manager of devices, but I found a v2 COM4 and COM5 RIM virtual serial Port when you select "devices by connection" under display in Device Manager) or are RIM Serial Port virtual v2 COM4 and COM5 drivers I'm looking for?

  6.) go to Options (on blackberry) - memory and make sure Media Card Support, Media Transfer Protocol (MTO) and Mass Storage Mode Support are resolved on 'On', the encryption Mode is set to 'None' and mass storage Mode Auto activate when connected, it the value "Prompt" although I tried to 'Yes' as well. It says I have 785 MB of memory space of the unit out of 879 MB total memory of the device and 7.1 GB of free space on a total of 7.3 GB of Media Card Media Card.

  None of the above tips and troubleshooting tips worked. I also checked the Blackberry technical solution center but I've not found anything there that has contributed to the other. I found discussions forums online, including issues of people with 'blackberry media sync cannot connect to the device' pop up, but I have not had this pop-up. The Media Sync screen remains just the same as if I never connected the blackberry storm to my computer in the first place even if my blackberry storm recharges via the computer.

  Is there something that I miss or have not yet done? What should I do?

  Too bad. I went to a Verizon store and they me remove the battery and turn the blackberry. Worked like a charm and I can now use Media Sync.

  Also told me that I need to update the software of the phone blackberry using Blackberry Desktop software (I have version 4 and need to update to 5) and make sure to choose to back up files when you are prompted during the update or you will lose all files, the media and info saved on blackberry.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• How to enable display of the State of the network in the system tray?

  How to enable display of the State of the network in the system tray?

  Hi barta75,

  Thanks for posting in the Microsoft Community. It seems that you have a problem with the display of the status of the network (on the system tray) on the computer. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

  We start with a few questions-

  (1) you have the network on the system tray icon?

  (2) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  I wish that you hover the mouse over the network icon and check the status of the network.

  Method 2-

  I would have you look at the article-

  Networking

  http://Windows.Microsoft.com/en-in/Windows7/products/features/networking

  Notifications and Notification area (Windows)

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/ee330740 (v = vs. 85) .aspx

  In addition, see the article-

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242#top

  We know if you need help. We will be happy to help you.

  Thank you.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.