The dynamic implementation of RadioButton?

Similar Questions

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• the 6848 ordinal is not found in the dynamic link library mfc90u.dll

  Hello

  (I hope) a brief history of my problem:

  I am running Windows 7 Professional (64 bit) on a VM (VirtualBox software) on my computer of Linux Mint.  I tried to run a program called Filemaker Pro Runtime, (name of original file FMPROR. EXE.  First of all, I get the error "the side to side configuration is incorrect" and after a few hours of internet browsing, checking the logs etc, I found that I had to install Visual C++ Runtime (x 86, 2008 version) that I found and installed.  Only concern was the page I have d/led (which was a Microsoft page) does not mention Win 7 system requirements - I have tried to find a version for Win7, but a search increase no relevant results.  So I installed the version I found, by Windows XP, Win Server and Vista (I think it may have been an old page).  This seemed to fix the side-by-side configuration error, but now I get the error:

  the 6848 ordinal is not found in the dynamic link library mfc90u.dll

  I tried a search on the web using the above string, but the closest results, mentioning only a .dll ordinal and various different seemed not really relevant.

  I would be very grateful if someone could help me find the required information fix it, score at least me to a Web page that will help me to understand.  I'm not a geek, but I'm pretty OK with research and implementation of aid on the web, but this time, I'm confused as to how to proceed.

  Thank you very much in advance for any help received

  See you soon

  Ricky Walker

  Hello

  Version of Windows 7

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=5555

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26368

  See if that helps.

• Size of the dynamic online ListField

  My requirement is to have the dynamic height listfield, I implementd a listfied custom by extending a VerticalFieldManager for each line and adding to another verticalfieldmanager for scrolling effect, but I'm stuck when it came to adding images in each row.

  I enclose the code to add textalone, of customrow

  public class CustomRow extends VerticalFieldManager implements FieldChangeListener, FocusChangeListener
  {
  public CustomRow(String a, String b)
      {
          field = new RichTextField(a,RichTextField.NON_FOCUSABLE);
          field.setPadding(10, 10, 0, 10);
          field2 = new RichTextField(b,RichTextField.NON_FOCUSABLE);
          field2.setPadding(0, 10, 10, 10);
          _focus.setFocusListener(this);
          this.add(_focus);
          h = this.getPreferredHeightOfChild(field)+this.getPreferredHeightOfChild(field2)+10;
          _vfm = new VerticalFieldManager(){
              protected void paint(Graphics graphics)
              {
                  h = this.getHeight();
                  graphics.drawLine(10, h-1, Display.getWidth()-10, h-1);
                  super.paint(graphics);
              }
          };
          _vfm.add(field);
          _vfm.add(field2);
          this.add(_vfm);
      }
  }
  

  A Y

  One way is to make your line a HorizontalFieldManager, add your 'image' as a BitmapField, and then add a value for money, where you add your RichTextFields.

  If you want to add lines by using this structure, loads, this will make slow processing, especially whenever you add a line.  You can do better your online custom a field.  But if you add only a few of them, it should run OK.

• Name of the dynamic pageFlowScope variable on a page of amx, possible?

  Hi all

  I have a problem that I can't seem to move at the moment. I have java classes that try to update some data, and if it is not successful it returns the ID of the control that contains the error. Then I take this control id and use it to highlight the field in error so that the user knows where it is. Usually, this works very well for any other than to a list view.

  For a grid/listView error control is returned in the form of something like "1.14" of the appeal of java, this is equivalent to the number of the line '1' and the id of the control "14". I can easily strip away the '. ' in java but I need a path in my AMX page to define a variable on the fly for example pageFlowScope #{pageFlowScope. {{} row.rowKey} 14} but I get EL analysis of errors try like this, the error is "ERROR_EL_PARSER_NESTED_EL_NOT_SUPPORTED". Basically, I'm trying to have conditional styles depending on whether E {pageFlowScope.114} is set to 1 or not. I can't imagine a better way to implement this in a listView?

  I can only suggest a medium crude to achieve.

  One way to see dynamic values in EL is to use a hash table and use the dynamic value as the key. I would record a HashMap per input element and then store the error with the line indicator not. You can even create your own implementation of HashMap and hoist the flag when running by overloading the get method.

  [For example #{pageFlowScope.elem14ErrorMap [row.rowKey}]

• The dynamic user interface shell: opening of the dynamic tabs

  I'm trying to implement the dynamic tabs using the ADF dynamic user interface Shell. After clicking on a link, a dynamic tab opens that displays a table. One of the attributes of this table is again a link and when you click on this link it should open a new tab dynamically. But when I'm clicking on this link attribute in the first tab, it gives a NullPointerException, the getCurrentInstance() in the tab context returns a null value. How can I solve this problem?

  I had similar requirements. Add the input parameter according to the flow of tasks which you try to call the other task from the link stream.

  Name: tabContext

  class: oracle.ui.pattern.dynamicShell.TabContext

  scope: #{pageFlowScope.tabContext}

  required: true

  This solves the problem.

• Drag / move the dynamic region to tree parent link table

  Hello
  
  Is it possible to drag a row of a table returned by using the dynamic region of the parent tree? For example, I have the parent tree Explorer (say, dept and emp), clicking the dept and emp, it makes the Department or employee details to separate the workflow using the notion of dynamic region. Now I'm moving employees Department provided one and link to another node in the Department, it does not work. The listener to fall (on the tree) is not getting recognized.
  
  Is there something I'm missing?
  
  Thank you
  Sachin

  Hello

  as far as I know, drag and drop happens on the client and is therefore not bound by employment regions or dynamic regions. Then drag and drop should work for this use case. You share the implementation of slip and fall in the scenario you so that I don't want to exclude a program on your site (for example disccriminator incompatibility) error

  Frank

• The dynamic tab programmatically (jhsDynTabContext)

  Hello!
  In our application, we are using JHeadstart 11.1.1.3. Dynamic tabs are enabled by using jhsDynTabContext, bean (class oracle.jheadstart.view.dyntab.DynTabContext.java).
  I'm trying to open a dynamic tab by program and I need to call DynTabContext.getCurrentInstance () to get the context of the tab to open a new tab, but the method returns null. How is it?
  I went to see the code and he's trying to get through the expressions ' #{viewScope.jhsDynTabContext} "or" #{pageFlowScope.jhsDynTabContext} ". Where and how can I set them? Or what is the most common procedure by opening the dynamic tabs programmatically?
  Best regards, Marko

  Marko,

  Indeed, my fault, the jhsDynTabContext is stored in viewScope.
  However, another approach could be much simpler to implement.
  JHeadstart is supported by a dynamic tab open of in another dynamic tab using an object with display type groupLink and the 'Show Linked Group In' dynamic 'New Tab' value

  I don't know exactly your use case, but if he really needs to be done by programming, then you can apply the same technique as we do with the Group link:
  -set the name of the taskflow which must be opened in new tab on the successful jhsDynTabLauncher bean (defined in the TF model)
  -move the jhsDynTabLauncher to the parentContext
  -use the result of the "LaunchTab" action, this triggers a parent (also defined in the TF model) action picked up in the taskflow boundless that launches the new tab using the now available in the parentContext jhsDynTabLauncher.

  Steven Davelaar,
  JHeadstart team.

• Conversion of the dynamic URL in URL compatible SE

  Y at - it a good solution for the conversion of passage of URL parameter to something more friendly for the search engines? I could convert the static html site, of course, but prefer to avoid that. There is a solution for the dynamic conversion of url operators for slashes posted 4 years ago by Phil Williams: http://tutorial90.easycfm.com/
  
  The answers posted by the developers on this site, suggest implementation problems. Maybe someone wrote a solution more recenty? I do not pretend Phil script doesn't work (I have not tried myself), I'm just curious if a newer solution has been made available and updated successfully.

  Hello

  Use the 'SESConverter '. (sesConverter.cfm)... you can find more info about this hotel

  http://developer.Fusium.com/tools/sesfaq.cfm

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• When I start firefox browser display a erroe message containing the text "point_except_handler4_common of procedure not found entry into the dynamic link library msvcrt.dll" I use windows XP

  when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP  in English
  

  This has happened

  Each time Firefox opened

  Is start mozila firefox

  This problem may be caused by a problem with the file c:\windows\system32\dwmapi.dll
  The dwmapi.dll file is a Vista file and must be present in Windows XP.

  See also [tiki - view_forum_thread.php? idforum = 1 & comments_parentId = 417674]

• 8610 all-in-one printer: I can't download the firmware update to remove the dynamic security

  "For not original hp ink users an update of the firmware option to remove the dynamic security is now available for select Officejet, Officejet Pro printers Officejet ProX."

  I have bee patiently for the "fix".   Following the posted signs: http://support.hp.com/us-en/document/c05308850?openCLC=true

  Step 2) "click your HP printer model in the table below and run the file to update the firmware downloaded from your Internet browser."

  Seems to have no option to run the download of my Internet browser.

  I use Safari (and that's all I intend to help).  When I click on the download, I get an error message that says: there is no application to open the file. I tried to right click 'open with' - any of these options are internet browsers.

  Can you offer any help?

  Hello

  Option updte to remove the functionality of dynamic security listed in the document is only intended for a Windows PC.

  Download and install the update by using the following link for Mac OS:

  http://FTP.HP.com/pub/softlib/software13/printers/OJP8610_R1640B.dmg

  Kind regards

  Shlomi