The extension framework CC does support WebGL?

Similar Questions

• The model Interface Toolkit does support the cRIO-9068 again based on Linux?

  Hello, I have a cRIO-9068 and need to integrate a Simulink model in my controller. The model Interface Toolkit does support the cRIO-9068 again based on Linux? Besides, don't Veristand? This page assumes that it is not:

  http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751

  Thank you

  Hi Southern_Cross,

  Based on the readme:

  http://digital.NI.com/public.nsf/allkb/D3F40C101B66128186257D020049D679

  It seems that it is now supported! These resources should provide a few more details:

  http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/

  http://digital.NI.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055

  Please note that NI VeriStand 2014 can't stand it targets NOR Linux in real time.

  Kind regards

• The Compaq Presario CQ41 does support 64 bit OS?

  I went in a chain retailer and I noticed the Compaq Presario CQ41 was running Windows 7 Home Premium 32 bit, but had 4 GB of RAM installed (which he could not fully use). The stafff I asked why and they said HP/Compaq laptops cannot run 64-bit.

  The Compaq Presario CQ41 does support 64-bit so it can used the entire 4 GB of ram?

  The Compaq Presario CQ41 will also support a 64-bit Windows 7 operating system.

• How do I trouble or repair cmd.exe on Win XP? For some strange reason the extension bat files does not work

  Hi all

  I have four PC all currently running Win XP Professional Service pack 3. Unfortunately only two of them will run the extension bat files when I double-click the file or run the file at the cmd prompt. The other two for some strange reason will not. When I double-click on them the cmd window opens quickly and then stops as quickly. There, someone knows what's the problem?

  I tried to do my research and on another forum, someone suggested to reinstall or repair the cmd. Is this possible? If so, how? What is the right course of action at all?

  Please if someone could help me to solve this crisis, I would be extremely grateful. Without these bat running files, I can't render my farm runs correctly. Thank you.

  Too bad. Figured it out. Thanks anyway.

• Updated to 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6. No dice. Renamed all the extension. Still does not work.

  automatically upgraded to Firefox 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6.20. Still nothing. Renamed extension files still nothing. Help. everything worked great until the upgrade. Thems like Noia and Adblocker Plus still do not work.

  To help other users find solutions, please return to this Thread and log in to the forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• The series Qosmio G20 does support PC2-5300?

  Hello all,.

  For some time now, I've thought about the possibility of an upgrade of RAM for my Qosmio G20 - 126 and all looking for a more economical way than that which is available via the Toshiba site (~ £100 for a 1 GB RAM Module!) I met articles suggesting that the Qosmio G20-126 is compatible with RAM PC2-5300 (333 MHz). To my knowledge the Qosmio G20-126 comes with 2x512MB PC2-4200 (266 MHz) modules installed, in addition to the direct available from Toshiba RAM upgrades are also PC2-4200. So my question for you, former scholars of the Toshiba support forum is simple; my laptop is REALLY compatible with PC2-5300? and if so there will be problems worthy of consideration (i.e. insufficient power supply etc...)?

  Also, I wonder if there are intrinsic advantages regarding the marked Toshiba RAM upgrades available via the site of Toshiba UK. I found the modules of RAM of the similar (at least as far as I can see) specifications for a third of the price. It would be also interesting to note that the model of module of RAM available here on Toshibas website is (according to Google products alias Froogle) same price when buying from third party suppliers (so it's not simply a question of margins exorbitant of Toshiba, unless of course the sellers are also defined on by the aforementioned increases.)

  Sincere greetings,
  Lee Hyde.
  ([email protected])

  Hello

  The Qosmio G20-126 supports a FSB 533 and, therefore, the PC2-4200 DDR2 266 MHz modules are! (DDR2 266 Mhz-> 533 MHz)
  It is absurd to use the RAM PC2-5300 DDR2 333 MHz due to the FSB. You won't see improvements in speed or performance.

  I wonder why you are surprised that Toshiba recommends the use of own products (memory sticks). I think that each manufacture recommend clean products!
  In addition, it is important to mention that brand memory modules are much faster and the performance is much better than the performance and quality of the nameless memory module.

  Of course, you can use all modules that supports hardware specifications, but the don t wonder about laptop performance and memory problems after the use of modules without a name!

  I use the modules of Kingston and I also recommend using these modules, because quality is really nice

• The e2000 wireless router does support jumbo frames?

  I can't find (unless I missed it) and in the e2000 on how documentation set sizes of frame of reference.  Is that supported?  If so, what are the steps?

  A fact important is jumbo frames are not compatible at a speed lower than 1000 Mbps

  I think that Linksys E2000 already has Gigabit Ethernet ports.

  And I think that you can change the size of the image on the properties of the Ethernet adapter if the card is a Gigabit Ethernet card.

• The last version, 23, does support the Roboform toolbar?

  I use my ROBOFORM toolbar every day. If I switch to Firefox 23 going to work again?

  I use the Version of RoboForm 7.9.0.0 and works very well with FireFox 23.0.1

  No problem

• The HP OfficeJet 6700 does support fax through a line of digital phone to StarHub in Singapore?

  I get my phone line at home to Singapore's StarHub over a digital phone network. My HP OfficeJet 6700 will be able to send and receive faxes on this network?

  Hello rabbers,

  Welcome to the HP Forums.

  I see that you do not want to be able to send / receive faxes via Starhub digital voice line.

  Actually, I should say no. This would work sporadically on a digital line, but no guarantee that it will work all the time.  Faxing is intended for older analogue lines and aimed at all ever for digital.

  Here is a link that will give you instructions for setting up the device HP all-in-one to send and receive faxes.

  Thanks for your time.

  See you soon,.

• Ports 10/100/1000 on the cisco 2911 router does support etherchannel

  Hello

  I need like below

  -Ethernet point to point leased - Line1

  --------Trunk-------- 2911 Router                                                                                          2911 Router-------Trunk-------------

  -Ethernet point to point leased - Line2

  I intend to use existing 3 onboard 10/100/1000 ports router 2911 for a configuration of trunk and etherchannel. Trunk connects to local lan conncts and etherchannel for remote sites. My doubt is can I configure 2911 as trunk ports on board and implement etherchannel? From now on, there will be no routing configuration in 2911.

  Concerning

  Siva K

  Hi Siva,

  > As of now, there is no routing configuration in 2911.

  use a LAN switch for this or an etherswitch module installed in routers C2911

  routed ports can be used only routed or bridiging (IRB) ports, you cannot configure the as trunks of L2, you can use them as a L3 port channel but not as a port-channel trunk L2.

  Hope to help

  Giuseppe

• The UCS B200 M3 does support Windows 2003?

  For compatibility with older existing software, I would know what (assuming that Microsoft extended until 2015 Support contract)

  Kind regards

  Geert

  Hi Geert,

  No, it is not supported.

  http://www.Cisco.com/en/us/products/ps10477/prod_technical_reference_list.html

  Padma

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards

• Updates for the NET Framework 2.0 updates does settle

  I have been reminded of the updates for the Microsoft.NET Framework 2.0 SP2 server 2003 and Win XP x 86.

  Do not install the security updates.

  Flawless number only "don't not instaled.

  I checked with the different advise on services to update, but it won't help.

  Any help out there?

  John.

  From Internet Explorer

  Original title: updates will not be installed

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  more information: http://taurarian.mvps.org/Framework/Net_Framework.htm

• The extensions Manager does not recognize products CC 2015 installed on mac

  Given that I've updated all my programs adobe to CC (2015)

  Extension Manager is no longer their watch programs installed and so cannot use/reinstall first extension

  I'm on a MacBook Pro with the latest OS 10.10.4

  Creative cloud shows everything is updated but I can't seem to make it work.

  The extension manager is not supported for 2015 of CC. Please see this link: Adobe Exchange

  Do not use Extension Manager to install and instead use the CC desktop application. There has been a lot of posts on this topic so far, so please check the previous discussions for more information.

• How can I remove the extensions I have created and run in Eclipse with Extension Builder 3 on Windows with Photoshop CC / CC 2014?

  I created a few different extensions in Eclipse using Extension Builder 3... I then press the green play / run button at the top to test these extensions in Photoshop CC and CC 2014.  This installs the extensions, but it does not use the extensions Manager.  Now, I want to remove my window to test extensions > Extensions list in Photoshop and can't find where are these files?  Anyone know how to remove these extensions from the list of test?  Thank you!

  You should find your test of extensions in the following directory:

  Mac: /Users/Library/Application Support/Adobe/CEP/extensions

  Win: C:\Users\\AppData\Roaming\Adobe\CEP\extensions