The files cannot be found or located when you try to connect again

Similar Questions

• "The file is not found" error message when you try to view recent items list for word and excel files

  Title files: original vista on the recent items list does not open

  When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there.  This happens with word and excel files but not the adobe pdf files.

  Hi GillianMO,

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.

  Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1

• Error message: the file cannot be found and cannot attach an Autocad drawing to a Windows Mail message

  Original title: I can't fix an Autocad drawing to a Windows Mail message.

  I can reach everything. He pointed out that the files cannot be found.

  Hi JerryHunt,

  1. when the files located?

  2 are you able to attach this file in other emails?

  3. How do you attach the file? Are you trying to drag-and - drop?

  You can try through the interface and try to drag and drop the file.

  You can also try to change the location to save the file. You can save to a different location and also save by using a different file name. Try to attach the file in Windows mail, then check if it works.

  Hope this information is useful.

• "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  Hi ebugsasi,
   
  To remove protect him writing on a kingston Micro SD cards, locate a switch or button on the side of the micro SD adapter card. It will normally be a symbol of locking/unlocking on it. Put it to the unlocked position.
   
  This should remove the write-protection feature.
   
  Keep me updated on the status of the issue.

• How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above.  This problem occurs when I try to convert a word in a PDF doc.

  How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above? This problem occurs when I try to convert a word in a PDF doc.

  Hi [email protected] ,

  Please try to follow the steps mentioned in this thread with a similar problem: Impossible to open the document. Please check if you have read permissions for the above file.

  Also, let us know the acrobat version you have and the version of the OS on your system.

  Let us know if that helps.

  Concerning
  Sarojini

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• Get the error 0xc00d11cd when you try to connect to applications

  I have a Microsoft Surface with Windows RT and since I got it I could not connect to most of the applications and others cannot access the internet at all.

  When you try to connect to all the apps from Microsoft I still get error 0xc00d11cd (0x82bc0005) and it just says: Please try again.
  This happens in music, video, games and apps Xbox SmartGlass.
  Also I tried multiple games, including all the Xbox games and other apps like Shazam simply cannot connect to the internet or connect to all the.

  Looks like people, email, SkyDrive, shop, E-mail and weather join the end network.
  Troubleshooting my network found no problem

  I tried to uninstall and reinstall applications and making a whole "refresh your PC" without success.

  Any help?

  Hi, jonathons11a
  in fact, this is the case, I had the same problem and he went just by logging on XBOX.com
  I maintain the money account, but the service works well.

  I think that this must be marked replied.

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry smartphones, I get an error when you try to connect to my world because of the r...

  I get an error when you try to connect to my world because of verizon replacement phones

  Hello!

  Your request should be sent as follows. Go to this address:

  • https://www.BlackBerry.com/CSOHelp/index.do?ft=generic

  and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Any other setting routera simply anonymously you on these public forums. Don't forget to also include the reason why you have exceeded your maximum eligible PIN associations to AppWorld (for example, several RMA, warranty replacement, etc..). If you do not have an "order number" for that field, just use whatever it is (for example, '123456').

  If the shape responds by telling you that your PIN is not valid, please report this fact back here also there is a path separate resolution for this problem.

  If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!