The format of my camcorder is not supported I first Pro CC?

Similar Questions

• Cannot link Media "Format not supported files" first Pro CC

  I moved my video files in an external HD and I am re-Binder video files from a version previous to first (for some CS5 and CS6 for others). When you try to add a link to these files, it throws an error message: "Unsupported File Format".

  I am able to import these same files in my project very well, so they do not work, but for some reason, trying to connect does not work. Any ideas?

  Thanks for the suggestions. I was on the line with the Adobe support for 2 hours, of which a large part was them control my computer. The long and the short of their suggestion was that I needed to export the project as a Final Cut XML file and then re - import in first. They got then suddenly without me being able to ask additional questions.

  I decided to investigate mine and regrowth autour with her a bit more and found the solution. When browsing to add a link to the file, I was viewing in the thumbnail view - and they are NOT selectable (although it would appear that you could. This must be a bug. Adobe and I missed it). Apparently you need to be in the list, select the file and click Import. When I did this, it worked perfectly every time.

  Adobe needs to fix this bug. Does not the miniature display, or allow them to be clickable. But the good news is, there is a way to make it work! I hope this helps someone else!

• I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEAS

  I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEASE PROVIDE ME WITH A

  Deleted file recovery can recover incomplete files, i.e. the part of these files may be missing.  Recover deleted files is much more reliable if recovery of a backup, instead of using recovery software.

  These things depend on the operating system and the file system.

  One thing, you can see: open one of these files damaged with a text editor, and then make sure that the constant % PDF is somewhere in the first 1024 bytes.

  PS please do not post ALL uppercase; It is very difficult to read!

• Paper size error: the custom paper size specified is not supported in the selected state bar

  I am trying to print on custom size paper (9.25 "x 3,875").

  I have OSX Lion and a 8600 Officepro more.

  I inserted the paper into the tray of my 8600 Officepro more.  I adjusted the sliding walls to match the size of the paper.

  I created a new custom in my print settings format.

  But the printer says:

  Paper size error: the custom paper size specified is not supported in the selected tray.

  What the...?  How that recalcitrant monstrosity to behave and do what I have to say?

  Here is the link to the manuals for the 8600 Pro JO.

  You want the user's guide.

• On page 7 Microsoft upgrade (online), when I entered the product key, it also showed not supported & contact support technique microsoft

  Original title: Window 7

  I bought WINDOWS 7 Professional in 2011 & upgraded to the WINDOWS 8 Pro in 2012. For some reason, recently I formatted laptop. I have the product key, but do not have the installation CD.

  On page 7 microsoft upgrade (online), when I entered the product key, it also showed not supported & contact support technique microsoft.

  PL. help me for the installation.

  Try the 8 key for download,

  https://www.Microsoft.com/en-us/software-download/home

• Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

  I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

  We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
  Kind regards
  Sam Towle

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1: make sure the game is compatible with your computer.

  Method 2: update the video card driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  If both methods fail, you will then need to get a new video card.

  I hope that helps!

• Copied songs from PC to Blackberry and gets the following error while playing their: "the media playing uses a DRM not supported."

  Hi, I got a black Berry and im tryin to transfer my albums out on it, but on my phone media player it keeps saying "the media playing uses a DRM not supported."  I think its because I did face straight of my albums od cd but how I put them on my phone and this I need 2 do, please help. thanx. XX

  Hello
   
   
  1. What is the model number of this blackberry?
  2. What is the file type or extension of file of these songs?
   
  I ask you to check with the help of blackberry if this file type is supported by the Blackberry phones. Normally protected by DRM files do not play on all devices that the license is purchased to play is limited to a specific device.
   
  You must have the Blackberry Desktop Software to transfer files between your phone and the Windows computer.
  Follow the link below to download the software.
  http://NA.BlackBerry.com/eng/services/desktop/
   
  
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  Hi all...

  I think % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  on my 1841 which is currently set to L2L via internet cable. Anyone seen this before? I can't find anything on Cisco related to this.
  The tunnel rises and I got the same configs using DSL except interfaces are different. Thank you...
  My configs are below:
  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  # address a.a.a.a isakmp encryption key

  ISAKMP crypto keepalive 20 periodicals

  !

  life crypto ipsec security association seconds 28800

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac xform

  Crypto ipsec df - bit clear

  !

  10 VPN ipsec-isakmp crypto map

  the value of a.a.a.a peer

  Set transform-set xform

  PFS group2 Set

  match address CRYPTO_ACL

  !

  interface cable-Modem0/1/0

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP address 98.x.x.x 255.255.255.224

  IP virtual-reassembly

  VPN crypto card

  Hello DialerString,

  I fear that the ACL is not related to the question, so I expect not to see anything in the debug output

  Hope to help

  Giuseppe

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• Error: The "centos64guest" guest operating system is not supported.

  Hello

  Did someone met this kind of mistake? Error: the "centos64guest" guest operating system is not supported. This happens during the recovery after disaster, the 64-bit centos OS prompt never switch on after the opening of the option "IP address change. While my windows 2003 and 2008 R2 are successful.

  Hello

  According to the compatibility matrix, customization of CentOS VMs is not officially supported:

  http://www.VMware.com/support/SRM/SRM-compat-matrix-5-0.html --> Guest Operating Sysytem customization Support

  Michael.

• I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

  I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

  Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

  Please see return, cancel or Exchange an order - Adobe

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• Video cards supported for first Pro 6

  Following a computer crash, I am currently installed my copy of the first Pro 6 on my other computer with a PNY Geforce GTX 750 TI video card.  This card is much better than the card I had on the old computer, but I see a problem when trying to optimize the performance of my material.  When I go into project settings to select the EMT to use this card CUDA cores, it is grayed out and don't make a selection.  I do this from the inside of the Premier Pro.

  Did I miss something in the way I'm trying to do or is this card not supported by Premier Pro?

  Thank you.

  If your nVidia card at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a file "supported cards.

• How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro?

  I have 2 sony camera popular with the AVCHD file structure. The two cameras are the same. How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0

  
  

  Now I see the date taken in the import screen until I click "ingest". When in the trash, this option is there, but no metadata in there. It is therefore impossible to import images from two cameras and have these sorted.

  
  

  How can I get this sorted out before, so I can export for the first?

  Thank you. Tom van den Dool
  

  Hi Tom,

  How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0.

  Sorry, you can not do as a prelude. You can request a feature here: http://adobe.ly/feature_request

  Thank you

  Kevin

• The last update has slowed my editing process in first Pro CC, Speedgrade & AfterEffects CC

  The last update has slowed my editing process in first Pro CC (Speedgrade must now restore the color? After the Animation effects, files have "without Audio or video?)  Can I re - download the latest version?

  I'm moving this to the Premiere Pro user forum so experts there can help you.

  You can also see:FAQ: how to install previous versions of creative cloud applications?

• When you try to install Vista, receive the message "this computer hardware can not supported booting from this drive." Disk 0 unallocated space.

  Original title: Disk 0 space unallocated: when I tried to install Windows Vista.

  Unallocated space of disk 0: when I tried to install Windows Vista on my laptop and the screen table "Windows Installer"down I got the important message"hardware on this computer may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu "...

  Name: Disk 0 unallocated space total size 149.0 GB free space 149.0 GB Type: (empty).
  Please tell me what to do, I'm desperate. Thank you!!!

  Hi n m,

  Boot you from the DVD to start the installation, or have you started the installation in the existing version of Windows?

  I would like to know if you want to perform a new installation or an upgrade installation.

  You can not install Windows on an unallocated partition, if you install vista on brand\fresh the new hard disk, you will need to create partitions on the hard disk.

  Method 1:  Format the partition and then try to install Windows Vista.

  Important: The applications on the computer and all data will be lost when you format (New Installation) of the partition.

  Method 2: You can follow the steps mentioned in the article below

  Error message when you try to install Windows Vista on a computer that has initialized the hard drives: "this computer's hardware can not supported booting from this drive.

  http://support.Microsoft.com/kb/925481

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************