The headset sounds distant/quiet/distorted sound

Similar Questions

• Satellite Pro U200 - sound to the headset only

  I have a Satellite Pro U200 and I install a Vista. I installed the audio driver, but there is no sound on the speaker just with headphones.

  Maybe the little switch that is placed in the headphone jack doesn't work properly.
  This option controls the output between the headphones and speakers.
  Try to plug and unplug the headset several times. Maybe it works then.

• Re: Satellite C660: Sound through the speakers when the headset is connected.

  I have a brand new 258 C660, running on Windows 7.
  Playback device: Realtek High Definition Audio

  * Whenever I have headphones or external speakers connected via the 3.5 mm jack plug, sound still comes through the built-in distant.*

  Here's what's happened so far:

  When I plugged the external speakers were first, I was asked to choose if I had plugged a headphone or speakers. I selected "speakers" and then also, perhaps foolishly, choose "do not ask me again".
  Now, I can't to this selection again.

  Here's what I've tried so far:
  -Reboot
  -Try different headphones, try them on other devices
  -System Restore (not, for some reason any)
  -all settings via the sound control panel

  Basically, I think that I am looking for a way to disable the internal ATAPI Jack when the external Jack 3.5 mm is used.

  I am aware, there was a similar thread some time ago, but the problem may be slightly different and perhaps due to the fact that I chose "do not ask me again". At least, I hope this isn't a hardware problem...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=241409𺼁

  Thanks in advance for any advice

  Don t think there s hardware issue.

  Try this:
  Connect the headphones.
  Go to the control panel-> Sound-> playback tab
  Here, you should see the speakers and headphones.
  Now choose the headphones and set this default value.

  This help you?

• I have no sound via the USB plug in the headset. But I do get sound by analog means. Everything takes? s

  I get no sound through my USB plug in the headset. But I do get sound by analog channel on my set of speakers. Everything takes?

  I would check the Manager devices to see if all your sound drivers are installed and working.  Click Start, right-click computer, and click Properties.  Then click on Device Manager.  If none of the entries have exclamation points or question marks, you need to get a Windows 7 compatible driver for them.

  I hope this helps.  Good luck.

• No sound when the headset is plugged into the audio input jack

  When I plugged headphones into the audio jack, there is no sound.  The noise comes from the internal speakers.  I just installed System Mechanic and ran a system of analysis.  I don't know if the registry has been changed or what.  It is not a problem with the headphones; I tried another helmet and have the same problem.  The phone detects the headset, an icon in the Notifications area saying that a device has been connected.

  Inspiron 15 series 3543

  Realtek HD Audio Device

  Hello. See if it will work when you switch the driver Realtel native audio driver in Windows.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.

  [To return to the Realtek driver, do it again but reverse steps 2-7 names].

• Do not hear sound on the speakers of the laptop when the headset is connected

  Hello, I have laptop Alienware14 with windows 7. I hear the sound very well on the speakers of the laptop, but when I plug my headphones, I can't get sound in the headphones and not on the speakers of the laptop. For example, I want to be able to use the headset to talk to people (like Skype) while listening to music in the speakers of the laptop in the game I play. My old laptop Inspiron does that very well, but it won't. Any suggestions on this... a framework that I did put right or something?

  Thanks for any help you can give me!

  Laptops that have its IDT have a framework for "Helmet of Communications". Which allows communication as Skype through the helmet, while the regular audio continues through the speakers.

  

  However the 14 Alienware has audio Realtek who doesn't have this feature, I think.

• Is it possible to put the speakers as the default output for the sounds of Windows and the headset as default device for music?

  Hello

  Is it possible to have all the sounds through the speakers, including music from WMP and WMP music in my headphones? Headset is USB (but I also have a Jack) and my speakers are with 3 Sockets at the back of my pc.
  Thank you.
  Friend,
  Zoenvisje
   
  Original title: all sounds through loudspeakers and music through headphones

  Hi zoenvisje,

  Thanks for posting your query in the Microsoft Community.

  Want to know if it is possible to play any sound on the computer with the headset. It can be difficult when something that is important to you does not work as expected.

  Method-

  It is not possible to make these changes on the computer.

  You can set a default speakers and use a different music player that supports select the default output as the headset device.

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• How to get sound from the speaker, while the headset is inserted into the laptop?

  In my laptop 15-E034tx Hp - Pavilion, I used the headset. While disconnecting the headset, the headset was broken. And headphones Jack of 3.5 mm of endpoint kept inside the laptop. You cut the wire. Only the tip of the helmet is inside the laptop. Now the speaker does not work because of this problem. If the headphone out only the speaker will work. Now, I want to how to disable the headset using software or Windows operating system?

  You should check the sound setting and depends on your sound card.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• No Logitech G35 headset sound after Windows updates

  Original title: last updated

  Twenty minutes earlier on 11/08/2011 my self out of the windows updated. After the update has been installed and restarted my computer, my logitech g35 headset is not working properly. If I turn them off in the control panel and reactivate as default device, I get 1-3 seconds of the sound before they be cut again. So two questions. 1 What is this happened to someone else. 2. how to fix it.

  Hi Hexter23,

  1. what application you are trying to use the headset?

  2 update did you recently installed on the system?

  3. are you able to hear the music / sound through normal speakers?

  Method 1:

  You can consult the following link and run the troubleshooter of audio playback, if it helps.

  Tips for solving common audio problems

  Method 2:

  If the previous step fails, then manually, download and install the latest audio drivers for the card its installed on the computer by visiting the sound card manufacturer or computer manufacturer's website and check if that helps.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• System seems to be stuck in the Surround sound Mode (see details)

  All of a sudden my system Windows 7 has started to exhibit strange audio - voices have been muted and sound effects were strong and echo-ey.  Speech on the occasion of the AVI movies was virtually inaudible.

  Then I tested MP3s and FLAC audio.  The same his warbly occurred during playback.

  I uninstalled VLC (video) player and MediaMonkey (audio) and reinstalled each.  No change.

  I read online her similar reports when your system is configured for Surround sound and you only have stereo speakers.

  I checked HER in my control panel and ensured he just be set to stereo.  Tested the L & R speakers and noise of default fanfare played very well.

  I uninstalled and reinstalled all audio devices and drivers in the control panel.  No change.

  THEN I discovered exactly the same sound problem on my partition of Linux Ubuntu 11.10.

  I completely reinstalled my operating system to Windows 7.  The problem remains.

  This suggests that this was not a request or a driver problem - I think it could be a hardware problem?

  The problem occurs during playback of any whatsoever by my digital-to-analog converter or directly from the headphone jack of my PC.

  I am an Archivist of the music and the sound is the most valuable function of my PC.  Sincerely, I hope someone can help me!

  Data sheet:
  HP Media Center m7470n 2.2 GHz PC
  AMD Athlon 64 X 2 Dual Core
  3 GB RAM
  Internal 1.5 to secondary, 300 GB
  Win 7 Home Premium 32 bit
  Realtek AC 97 audio
  Cambridge Audio DACMagic external analog digital converter (USB)
  Dual Boot of Ubuntu 11.10

  The difficulty even in the two operating systems and through all the audio outputs (both helmet Realtec AC 97 PC and starting from CAD)

  Problem solved!

  The constant all my diagnosis was good Sennheiser studio monitors I was listening through.  (My floorspeakers of 814v of focal length would be much too strong for my apartment.)  Turns on (laugh all you like), the cable had become slightly disconnected from the headset!  Pushed him to, all better!

  Lesson learned.  Thank you.

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• GarageBand wasn't able to install the new sounds

  I'm under GarageBand 10.1.2 & OS X El Capitan 10.11.6 on a Macbook Pro 13 retina "(2016).

  A couple of weeks, that I have installed additional drummers with no problems. I noticed, however, that many of the sounds in the sound library had an icon to download next to them; so I went to the GarageBand menu, option "Sound Library / download all the available sounds" and they begin to download immediately. Most of them have installed fine (and is still usable), but at some point the download has stopped and a window appeared with the message "GarageBand wasn't able to install the new sounds. Close and re-open GarageBand to download and install again. »

  Since then, whenever I open GarageBand, downloading continues automatically, but after a few minutes I get the same annoying message.

  I searched the Internet and tried all the following without success:

  (1) closed and reopened GarageBand

  (2) given in market system

  (3) delete the folder "/ private/var/folders/lq/nb_0wt4d1zq5rs933745flww0000gn ' and all its contents

  (4) remove the "user/Library/Caches" folder and all its contents

  (5) the latest version of Java from Oracle (update version 8 101 - build 1.8.0_101 - b13)

  I always feel the same frustrating lock when I open GarageBand (download starts and after a while it stops and the error message shows up again... and again once).

  I've included some screenshots on this post below, which illustrate the issue.

  Thanks in advance for any help you can provide me with!

  

  

  Just to be sure - you have enough free storage to install all the new sounds? The instrument only GarageBand library has 14GB on my Mac.

  Until you try to install the sounds still launch the Console application and look for messages of diagnosis in the Console, when GarageBand gives the error message.  Are there clues, all messages associated with GarageBand in the Console window?

  Sometimes third part applications or incompatible system additions could cause this kind of problem, as firewall and antivirus software, for example, Little Snitch or Kaperski. If you have any of these installed, disable it before attempting to download the software.

  To prevent the non-standard extensions system to interfere, restart the Mac in Mode safe, before you try to install again, see: try safe mode if your Mac does not commissioning - Apple Support

• How to disable the shutter sound in the screenshot

  OSX El Capitan

  iMAC 27 inch Retina 5 k end of 2015

  Is there a way to disable / mute the shutter sound when you make a screenshot?

  Use the F10 key

• Change the Notification sounds

  I would like to change the notification sound for messages on my MacBook Air? I can't understand it.

  Launch Messages.

  Messages > Preferences > General > "his Message received:

  Click the box next to 'Sound Message received' and choose the sound you prefer.