The implicit conversion of "char to number" or "number of char".

Similar Questions

• implicit conversion to sql

  Hi guys,.
  
  I have a question on how the oracle is posting implicit conversion in the following cases.
  
  I have a table: table1 with two columns: a number (10), b varchar2 (10). Both are indexed unique.
  
  
  If I have a SQL like this:

  select * from table1 where a = '99'

  the implicit conversion is performed on '99' and the final SQL will be something like:

  select * from table1 where a = to_number ('99')

  the same thing will happen with 'aaa' and I get an error. Please note that represents the column and the index will be used.
  
  If I have a sql like:

  select * from table1 where b = 99

  Note that b is the varchar2 column.
  the implicit conversion will be done on the column and the index will not be used

  select * from table1 where to_number (b) = 99

  THEN, forgetting for a moment that it is not OK to allow an implicit conversion, what are the rules that apply here? If the number, the conversion will be made on the value and varchar conversion will be performed on the column? What else?
  
  
  Thank you

  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/sql_elements002.htm#SQLRF51047

• If an implicit conversion takes place

  Hi all
  
  I have two queries tell
  
  SQL > SELECT * FROM EMP WHERE HIREDATE BETWEEN February 20, 81 'AND February 20, 82';
  
  EMPNO, ENAME, JOB HIREDATE DEPTNO COMM SAL MGR
  ----- ---------- --------- ---------- --------- ---------- ---------- ----------
  7499 ALLEN 7698 1600 20 FEBRUARY SALESMAN 81 300 30
  7521 WARD 7698 1250 22 FEBRUARY SALESMAN 81 500 30
  7566 JONES MANAGER 7839 2975 2 APRIL 81 20
  7654 MARTIN 7698 28 - SEP - 81 1250 1400 30 SALESMAN
  7698 BLAKE MANAGER 7839 2850 MAY 1, 81 30
  7782 10 removed MANAGER 7839 2450 June 9 81 10
  7839 10 deleted PRESIDENT November 17, 81 5000 10
  7844 TURNER 7698 08 - SEP - 81 1500 0 30 SALESMAN
  7900 7698 DECEMBER 3, CLERK JAMES 81 950 30
  7902 7566 3000 3 DECEMBER ANALYST FORD 81 20
  7934 10 deleted CLERK 7782 1300 January 23 82 10
  
  AND
  
  SQL > select' 17-SEP-2010 + 1 double;
  
  ERROR on line 1:
  ORA-01722: invalid number
  
  now in the first case, I spent a string and that turned into a date
  but in the second case, I try to add a day to this date it is not be converted in the second case.
  
  When in fact the implicit conversion is done.
  
  Thank you and best regards,
  Sri ram.

  Probably below may be the reason.
  In the first query you asked oracle to match the hiring date between two dates. Oracle implicitley equal strings depending on the hiring date data type.
  But in the 2nd query you specify a string in your oracle query does not include what format to convert the string.

• ORA-06502: PL/SQL: digital error: error in the conversion of char to number

  Hello world.

  I have a strange problem here. I'll try to explain better. I work with APEX 4.2 and of Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production.

  Here are my parameters NLS_SESSION_PARAMETER and NLS_DATABASE_PARAMETER: NLS_NUMERIC_CHARACTERS,.

  
  

  I have a table with a lot of body numbers, and when I imported a MS Access application data, all fields were imported with the comma as decimal separator.

  
  

  Now, I have a form with several fields of number and when I leave a numeric field, a body of numbers of amount total is calculated and automatically filled with a bit of javascript.

  
  

  Now the problem: calculating fields (sum) succeeds only when I use the decimal as the delimiter. If I use the comma, I get a NaN value in the total amount field. I managed to convert all commas in points with javascript, so the total amount is calculated.

  When I try to save the record, I get the error: ORA-06502: PL/SQL: digital error: error in the conversion of char to number because I'm trying to save the separator point in my number fields.

  
  

  I tried to use REPLACE function to replace the. by one, before winning but does not solve the problem.

  
  

  This sounds familiar to anyone?

  
  

  Thanks in advance.

  
  

  
  

  OK, the problem is solved people.

  Somehow, the registration procedure had an influence on another calculation of my form and the error came from this process. So I put a to_number and replace stated in the calculation and all records very well and it shows my total.

• CVI2013: WARNING: implicit conversion changes signedness: "long" to "int".

  What is Clang was trying to say with this warning?

  int f( void )
  {
    int i1 = 4;
  
    int i2 = 1l << ( i1 - 1 );
    //       ^^  warning: implicit conversion changes signedness: 'long' to 'int' [-Wsign-conversion]
  
    return i2;
  }
  

  Hello CVI - User!

  The explanation is quite technical...

  The result type of the expression of SHIFT is "signed for a long time." The target type of the initialization is "signed int". Clang injects an implicit "signed long" conversion to "signed int" and check the different properties of the conversion.

  In particular, clang tests if the sign of the value can change during the conversion. For this test, clang calculates the range of 'values' of the source 1 L< (i1="" -="" 1)'="" and="" the="" "value="" range"="" of="" the="" target="" 'int="" i2'.="" the="" warning="" indicates="" that="" the="" signs="" of="" the="" source="" and="" target="" ranges="" do="" not="">

  The range of values of the source depends on the expression 1 L< (i1="" -="" 1)'="" and="" here="" clang="" is="" applying="" a="" special="">

      [excerpt from GetExprRange in the clang 2.9 source code]
  
      // Left shift gets black-listed based on a judgement call.
      // ...except that we want to treat '1 << (blah)' as logically
      // positive.  It's an important idiom.
  

  Therefore the range of values of source is: wide, 32-bit positive.

  The range of values of the target depends on the type of "i2" and that's the range of default values for "signed int": 32 - bit wide, positive or negative.

  In other words: 1 L< (i1="" -="" 1)'="" is="" considered="" positive="" (unsigned)="" and="" it="" is="" converted="" to="" a="" signed="">

  Note that this is really a special case and that you do not get the warning for other values:

    int i2 = 2l << ( i1 - 1 ); //no warning
  

  Unfortunately, I can not explain why clang didn't just compare the source and target types, it calculates the ranges of values and why 1< (blah)'="" is="" treated="" specially.="" i="" don't="">

  Peter

• Retrieve the implicit refinements (7 MDEX)

  Is there a way to the new API (Latitude 2 / 7 MDEX) for implicit refinements? I know that it was possible in previous versions (using ENEQuery), but it seems not so much in the new (using DiscoveryService). I would be very useful to know how to get the implicit (if possible) refinements, but it would be good to know too if it is not possible at all in the new API.
  
  Thanks in advance!
  Manzoni.

  Hi Angie.

  Currently, if an attribute has implicit values only (there no normal improvements on this attribute), then the mdex will not return a navigation for this attribute menu item. If the attribute is 'normal' and 'implied' values, so normal and implicit back together into a single navigation menu object and each refinement is not decorated with any what identifier for what is normal or that is implicit. Those implied would have a number equal to the size of the result set. I suggest that you submit a feature request to display the decoration of implicit of the improvements in order to set apart them.

  Jason

• Clarification on the implicit part

  Hello
  
  If your parent (Dept 200) has only 1 child (Dept. 200-01). Which Member would you tag "Never share" the Parent or the child? I think it's the parent. Also, this happens only if the Parent is dynamically calc would be? This question confuses me :)

  I think it's the parent. Also, this happens only if the Parent is dynamically calc would be? This question confuses me

  Parent is correct. You can break the implicit shared behavior by default affecting the Nevershare parent.
  This occurs if the parent and the child are stored.
  sharing is not going in for a dynamic parent photo calc, it will calculate based on the consolidation of the sketch.
  Result could be same and same stored number members.
  But there is a difference in data.
  If you load data to the parent company, load is ignored if dyncalc. (This isn't shared implicit)
  Will be filed in the child if the mother is stored. Refers to the parent and the child will use the same cell to store and read. (This is implicit shared)

  Let's break this relation ship parent with nevershare for ease of loading high for drivers and targets in the tag planning applications.
  For a real application, it makes no difference. In fact, it will save the size and the calctime.

  Hope you understood.

• with the master page "insert current page number" error when you export the book

  Using InDesign CS for Windows 5.5

  Recently updated for InDesign CS (very old one from 2003). I save a copy of all my old files version and kept the old installed ID just in case (after reading all the horror stories on here).

  In my old version of ID, I created a book consisting of some 70 documents. Some of these documents are a single page, while others have multiple pages. In the multiple documents page, I used the "insert... current page number" character (or whatever the command was in the old version) on a page master and formatted as follows, for example: Page 1 of 17, Page 2 of 17, Page 3 of 17, etc. When I exported my book in pdf format, it worked fine. (I is not have to / want page numbers consecutive throughout the book, only in individual documents.) By that I mean my whole book is about 280 pages, but not all of these 280 pages are numbered, only groups of pages in multi-page documents. It is not read page 1-280).

  Am my upgrade to 5.5 a few months ago added some documents in the book, and (if I remember correctly) when I saved the book he asked to convert each document version to the new version, I said OK. When I exported the book in pdf format, some documents that are more than 2 pages are now counted wrong; the numbers are now like this: Page 1 of 17, Page 2 of 17, Page 2 of 17 (supposed to be page 3), Page 2 of 17 (supposed to be page 4), etc. Each page, but page 1 is now page 2 of that either.

  If I open the individual document and export it to PDF, the page numbers work very well. It is only when the document is exported with the book the page numbers to spoil. And it's not all documents in my book; This error starts to a particular document and continues from there throughout the rest of the book, affecting any document more than 2 pages. Documents several pages before that point in the book for export with the correct page numbers.

  I create new documents by performing a "save under" with a previously created document and cut and paste as needed, so I won't have to reformat or implement the page numbers on each new document. I use layers or styles (I do not know there is a better way to do what I need, but I didn't have time to learn the basics, just enough to be functional.)

  My attempts to resolve this problem so far (using version 5.5), tests with the first document where the error: (1) I have removed the document from the book, removed the page number character current insert, back to the current page number character insert, saved, the individual document exported in pdf format and it worked fine. Put it in the book, save, export, and it is bad. (2) I picked up the book document, export the document to .idml, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (3) I started to the top of my old version of ID, open from the previous version of this document, exported .inx, closed, open the .inx in ID 5.5, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (4) I moved the document to the top in the order book, put it on a document which correctly numbered pages, saved, exported to PDF and this document was still evil, but one who has been numbered correctly all along is still correct. (5) I compared the settings for this document to others that the number properly and found no difference.

  It's as if the page numbers get hooked on "2" when I export the book, but only in the last two-thirds of the book. Sorry this is so long, but I hope that this description of my problem is understandable. Any advice, other than to go back to my old version documents and start over?

  Thank you for your time and all the information great this forum provides.

  Alice

  Normally, I would say that this kind of problem is symptomatic of the incorrect numbering options in the book panel or an individual document or a bad update of the numbering, and those things are still definitely worth looking at.

  That said, I invite you to go to the original files, export each one to .inx and open those in CS5.5 and save as a new file .indd CS5.5 whose new name, then add them to a whole new book CS5.5. Books are pretty flakey without mixture in the conversion of files, and there are enough bad behvior file conversion directly inherited the .inx route is insurance a little success.

• CCleaner shows a plugin in firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted.

  CCleaner shows a plugin in Firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted. It is a plugin for Firefox by default, and if so, what do I do? It does not appear in my list of Firefox addons in Firefox and a malware scan does not detect.

  It is possible that the profile has become corrupted, and you can try to start a new profile.

  • Use the Profile Manager to create and delete profiles Firefox

• Apple does not list a country the list code to add trust number (validation of 2 steps)

  I used the gate 2 years with my number + 849xxxxxxx

  Today I turn off validation of 2 steps to config something, so I tried to reactivate it.

  Then, I realized that Apple updated the list of country code, and this is totally wrong with the Viet Nam.

  It is + 848 (Viet Nam) instead of + 84 (Viet Nam) as before.

  + 848 is a new type of phone number here in the Viet Nam, many people here still use the old kind of number like me (+ 849), not the + 848. That's why I can't re - activate 2 validation of steps again.

  My friends also had the same problem as mine. I think that Apple should give the country code option to + 84 (Viet Nam), not the + 848 (Viet Nam) as soon as POSSIBLE, now that my account is not protected because of this error.

  Thank you.

  I totally agree with you.

  I have not even worse, I can't receive the verification Code when loging itunesconnect.apple.com, so I can't download the new version of my application.

  I hope that Apple will fix it as soon as POSSIBLE.

• How do I know the laptop model and my product number

  I want to know a shortcut to find the model of my laptop of HP, knowing that the laptop is not written by any number of model and product specific on the background data, and there is only one word «Pavilion dv6»

  Please do not delay in this response, because this subject is very important for many people

  Hallam-

  Try one of the options in the document on finding your product number or model number.

• Award-winning Skype of the trial include a Skype phone number that people can use to call me?

  Award-winning Skype of the trial include a Skype phone number that people can use to call me?

  I am currently on a 30 days free trial premium Skype. This test includes a Skype number that people can use to call me? Or do I have to spend money to buy this Skype number separately, even then on the trial of premium?

  Thank you

  adawe wrote

  
  

  1. This test includes a Skype number that people can use to call me?

  
  

  2 or do I have to spend money to buy this Skype number separately, even then on the trial of premium?

  Hello

  1. No, it is not

  2. Yes, you do.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• In the bar of windows svn revision number

  Hello

  I think about the possibility of putting on the application toolbar (exe) SVN revision number. I would be characteristic of the usueful to quickly assess, what source application, code review is to build in.

  What I need is therefore a kind of trigger/interface that I could use to launch scrap one code that modify the bar of the application window when the application is being built. I thought to prepare the chain using the Exec.vi system (to run the command - st svn.exe to get the information I need). But how is it I can impose on LV to trigger this code only when the build operation starts?

  Or maybe I'll use different approach?

  Hello

  in the build specification, you can run a VI prior to construction.

  So if you know how to find the svn revision number, you can call a vi that change the name of your VI main when you build the exe...

  I think it is the right way! :-)

  Best regards

• Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Hi MikeGoodold,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

• Cannot receive or send mail using the Windows Mail get 0x800CCC18 error number

  How can I fix the problem?
  Cannot receive or send mail using the Windows Mail get 0x800CCC18 error number
  Windows mail was working fine until about 2: 30 EST 2011-12-14 and tried to send an email and got the above error msg.

  Check with your mail service provider to make sure that there is not an intermittent interruption of service.  If you have webmail capabilities, you can also check.  Otherwise, compact and repair the database (www.oehelp.com/WMUtil/) and if that doesn't help, remove your e-mail account, close and reopen WinMail and then add it back back.  Also check 3rd party program interference such as antivirus software (see www.oehelp.com/OETips.aspx#3).

  Steve