The installation disc (USB) boot camp is not found

Similar Questions

• used sytem repair from the installation disc difficult or too complicated?

  do you know if the repair system hard to use from reinstalling vista irunning disk?  without any reason after windows drivres dell download does not start, it is just there to take all this time and if I'm lucky it will start, I used the configuration of the system, and that did not help. I know, it seems that he is sssoooo nearly all set to start at the same time, but in the system and the process where it lists everything that I don't know what is what, so I can't stop the useless stuff to start, I thing I have too many things that either doesn't work - I don't have not even half uninstalled or put in the easy computer were and if it's the dell drivers , screwing, then why vista does not work?

  Dell has a touch screen F12 on boot options, but vista says to put in disk, press on restart and then repair, but what happens if I can't do it at the start or the dvd - rom does not start when I reboot?

  and if it doesn't it's really complicated? I ran disk cleanup and repair. I ran to check memory, I had 140 GB free out of 240 GB, I ran two restorations system back to dates before I installed the drivers from dell, everything worked fine until last night, now dell takes to always to get to the windows startup takes part and windows to start even in safe mode.

  I ran all the controls sytem dell pc and everything passes .so should I put the disc and hit restart? and should I first go to where he gives the choice to load some stuff or normally loads at startup, and which one should I use all or just selective to go until I reboot. Thanks for any help you can offer, because it runs now I don't even want to turn it off.

  Which

  Hello

  You receive an error message?
  
  Method 1:
  You must restart your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows installation disc, you can follow the procedure:

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart.

  d. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  e. Select your language settings and then click Next.

  f. click on repair your computer.

  g. Select the operating system you want to repair, and then click Next.

  h. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 2:
  You can see startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3:
  You can check the event viewer for related event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also see the links provided to learn more:
  http://support.Microsoft.com/mats/slow_windows_performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• Help! Boot Camp will not read my Windows 7 installation disc

  I need to repartition the hard drive on my Mac for Windows to give more space. I thought it would be simple but not.

  I am running OSX and using Boot Camp 4.0.1.  I made an image of my Windows side, saved the side Mac and was able to remove my original windows partition. Now, I'm trying to use create the new partition and install Windows 7 from the disc, I bought two or three years.  It does not create the partition because "the installation disc is not found." This drive worked perfectly the last time and was intact, sitting in its case, then there is no reason to be damaged. My player plays other discs.

  I missed a step somewhere? Do I need a new disk of Windows? I don't know how to replace my drive. I think that I bought on Amazon.  The ISO-image-on-a-USB option is not available. I'm stuck!

  If anyone has any ideas, I would appreciate it.  I bought my son a video game for his birthday which works only on Windows.  The thing is HUGE. It not was not in these games when I did the initial installation or I would have allocated a lot more space.  I had no idea!  He was eager to try this new game.

  Thank you

  Cathleen

  Did you delete the original Boot Camp partition through the Assistant Boot Camp in OS X?

  http://docs.info.Apple.com/article.html?path=Mac/10.5/en/15554.html

  Do that first, then re-create it in OS X and follow the instructions to reinstall Windows 7:

  http://www.Macworld.com/article/1165272/Bootcamp.html

  You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• The installation disc could not be found

  I get the same message continuously when I am bootcamp Windows 7 on my iMac mid 2010.

  I have read through the other threads here and searched online and nothing that I don't seem to make any difference.

  I have a iso, tried to burn on an external drive and a FAT format USB key.

  Downloaded the package of appropriate support bootcamp for my system.

  Followed all the instructions on the help page of training camp, but still can't make it work.

  I am gradually abandoned so any help would be greatly appreciated.

  Chrischarge g ' Day,.

  Thank you for using communities of Apple Support.

  I understand from your post, that you have a problem installing Windows 7 on iMac (21.5 inch, mid 2010). I use Boot Camp dual-boot my system as well, so I know that it is important we have this installation problem solved. I have several things for you to try.

  First of all, it's a good idea to make sure you have a recent backup of important data from your iMac. The article below will help ensure that you have a recent backup:

  Use Time Machine to back up or restore your Mac

  Then, I see you are using Mac OS 10.6.6. Let us make sure that you have the latest version of the software installed for this OS (10.6.8). Please try to update by following this path: Apple menu > software update.

  Finally, it is important to respect the requirements and installation steps to install Windows 7 and older versions on your Mac with Boot Camp. The installation steps are unique depending on whether it is a new installation of Windows 7 or an upgrade installation of Windows 7.

  Perform a new installation of Windows 7

  Follow these steps if you install Windows 7 on your Mac for the first time.

  1. Start your Mac in OS X.
  2. Use the tables at the end of this article to make sure that you have a Mac that takes in charge the version of Windows that you are installing.
  3. If your copy of Windows 7 has come on a DVD, create a disk image of the installation disc for use with Boot Camp.
  4. Connect a 16 GB or more large USB flash drive you want to erase. Leave this connected to your Mac, flash player until the Windows installation completed.
  5. Open Boot Camp Assistant in the Utilities folder (or use Spotlight to find it) and click on continue.
  6. Select only the options to create a Windows Setup disk and download the latest version of Windows software Apple support. Then click on continue.
     
  7. Insert your Windows installation disc, or choose your ISO Windows installation, then click on continue. Boot Camp erases your USB and he prepares for the installation of Windows. Once the flash player is prepared, close the Boot Camp Assistant window to exit the application.
  8. Use the tables at the end of this article to find that Windows supports the software (drivers) you need for the version of Windows and the Mac you're using.
  9. Click on the link in the table to download related software.
  10. Once the file is downloaded, double-click it in the Finder to decompress (unzip) it.
  11. Open the folder that results. Look for the following files in this folder and drag them to your USB Flash drive. When you are prompted if you want to replace the existing items on the flash drive, click Yes.

      $WinPEDriver$ (file)
      AutoUnattend.xml
      BootCamp (folder)

  12. Open the Boot Camp Assistant again, and then click on continue.
  13. Only select the option "Install Windows... or later."

  
  
• Click on install, and then follow the prompts on the screen to re-partition your hard drive and install Windows.
• When you have completed the wizard, your Mac restarts with Windows Setup. When you are asked where you want to install Windows, select the BOOTCAMP partition, then click on drive Options and format your Boot Camp partition.
• Follow the prompts on the screen to complete the installation of Windows.

Perform an upgrade of Windows 7 installation or an earlier version

You can upgrade to the existing installations of Windows XP or Vista to Windows 7. You need at least 10 GB of free space on your Windows partition.

1. Start your Mac in OS X.
2. Use the tables at the end of this article to make sure that you have a Mac that takes in charge the version of Windows that you are installing.
3. Download software support for Windows (drivers) bound to the table, or locate the OS X Install or the restore disc supplied with your Mac so rated.
4. Decompress (unzip) download it and place it on a USB drive formatted in FAT (MS-DOS). Let this flash drive connected to your Mac during installation.
5. Start your Mac from the version of Windows that you currently have installed.
6. Use the Windows Installer to upgrade to Windows.
7. After Windows Setup is complete, your Mac starts in Windows. In Windows, open the file "BootCamp.exe" on your USB stick or the installation disc supplied with your Mac. Follow the prompts on the screen to install the related drivers for your Mac.

After the driver installation is complete, connect to Windows to start using it on your Mac.

Have a great day!

• Windows 7 does not recognize the installation discs

  Hello

  I have a problem, and I don't know if there is a solution, but here goes.

  My laptop is a HP DV6-7029WM Windows 7, 64 bit.

  The hard drive was dead, and he was replaced last month.  I sent it to HP.  C is the hard drive, and was originally the recovery on D. Removable media were on E, and when I connected a USB stick or memory card reader it would on F.

  When I came back, hard drive was on C as it was originally, and there was no recovery drive D. D is now my removable media drive. When I put in a USB stick or a memory card reader, which is now on the E drive.

  After I bought this, I put the recovery on a USB key, but I've accidentally thrown out. (My mistake) So I ordered the installation diskettes after that I return my HP PC.  I had 2 DVD system recovery disks and an Application and a recovery DVD Drivery.

  I want to reinstall Windows back to the default settings. I put disc 1 (System Recovery DVD) and close.  I reboot and it goes directly to the office. I hear the whirring disc, but nothing happens.

  I go to the control panel > Recovery > advanced retrieval methods. I click on restart, and it loads files and then says DVD set, which I do. He told me that he does not recognize the installation disc.

  I googled this problem and found a poster on CNET that had the same problem as I do. Also, I can't do a system restore.  My problem is the same as this poster on CNET.  I can read DVDs and CDs.  Those that work very well.

  http://forums.CNET.com/7723-19411_102-568059/Windows-7-installation-disc-not-recognized/

  The files are on the DVD, because I see them.

  I don't know what to do. Should I send my PC back? Can I do to solve this problem?

  Thanks in advance.

  pen

  Hello:

  With recovery disc 1 into the DVD drive, restart the computer and at the beginning of the HP welcome screen, press the ESC key to display a menu of options.

  Select the F9 boot menu option.

  Select the DVD drive on the list of bootable devices, and press the Enter key.

  Watch the screen for additional instructions.

• The installer disc will not load?

  When I insert the installation disc in my iMac, it stays (no load) for 10-15 seconds, then auto-éjecte. The first time this happened, I assumed it was a bad drive and got a replacement. However, it happens with the replacement drive as well. I installed other software by disk successfully, recently, including an upgrade to Photoshop and does not know why the computer keeps rejecting Lightroom.

  I tried to reboot in safe boot mode and same thing.

  Any ideas how to get my computer accepts the CD so I can install the program? Thank you!

  Write the truth wrote:

  The trial version is not the full version. I know I downloaded it yesterday and it is 67MB. The full version is 198MB and I know because I planned to buy it after trying the demo version of LR 2. This was also confirmed by a salesperson at Adobe.

  Danis has it right. The trial is the full version. Try to delete the prefs file. pointers to it are in the FAQ. See resolve system errors or freezes in Photoshop Lightroom and Photoshop Lightroom 'Préférences' and ' database/catalogue'?.

  Don

• Unable to boot from the installation disc

  I am trying to run repair on my imac 10.6 disk utility snow leopard.  I have no problem with the Superdrive drive.  The installation disc is fine.  I inserted the disc in the drive.  When it mounted on my desktop I stopped.  I pressed the c key and pressing the Start button.  The Apple logo appeared with the spinning wheel.  After two or three minuets logo Apple disappeared and replaced a circle with slash.  I had to pull the plug at this point here.

  Try instead boot into recovery mode.

  On OS X Recovery - Apple Support

• I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  The serial number of the computer has nothing to do with the product key for Windows.

  What happened when you tried to install Xp with sp3? If you do not have the original for the computer that you use to install Windows?

  You can try to contact the manufacturer of the computer who may be able to provide the recovery disc. The disks are usually under $ 20.

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30-45 minutes

  I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30 to 45 minutes.  I checked to be sure there is no Adobe folder in my program files.

  Hello

  Please check the help below document:

  Error download or update Adobe Creative Cloud applications

  You can also view the nets below where the issue has been addressed:

  Error 207 to "install Adobe".

  Adobe creative cloud installation does not work. Get the error code 207. All solutions?

  Kind regards

  Sheena

• I don't have the installation disc for my copy of the student teacher CS5 extended and I do not know which files I have to download for installation?

  I don't have the installation disc for my copy of the student teacher CS5 extended and I do not know which files I have to download for installation?

  The difference between the student-to-teacher and regular versions lies in the license.  The software is the same.

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

• Boot Camp can not detect Windows software support

  Hi guys!

  1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:

  http://postimg.org/image/9mly0tvjl/

  2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!

  http://postimg.org/image/tg97p5fu5/

  3 and now it was time for step 3:

  http://postimg.org/image/554gf7i3x/

  After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...

  It is said that: "Boot Camp can not detect Windows supports software.." and so on.

  Where do you think the problem is? Is - this problem on the ISO file?

  I would appreciate any kind of help,

  Thank you.

  What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• Uninstalling Java problem: "the installation source for this product is not available. Make sure the source exsists and that you can access. »

  Hi, I'm having a little trouble trying to uninstall Java, so I can reinstall it. I get this error message:

  "The installation source for this product is not available. Make sure the source exsists and that you can access. "When I try to find the installation package to uninstall. I'm the only person on my laptop Windows Vista Ultimate, and I am the administrator on the computer. I can't find something when I search for it during the uninstallation. When I go on ' computer > disc Local (c) > Progam Files > Java' I see a whole bunch of files, but I can't find the installation package with the 'Installation .msi package' at the end. I find 'install.rdf '.

  I was wondering if anyone can help find me the source for Java, so I can uninstall and reinstall so my Java work properly.

  Java has been uninstalled before when Elluminate program my brother (online meetings of his school) and I guess when he was relocated something went wrong, but I have 2 Java programs. One by one by Sun Microsystems Inc. and Oracle and I am trying to install are Sun Microsystems Inc..

  Help, please!

  Corky (Corkster)

  Java issues are best handled by people in the Java forum:

  http://Java.com/en/download/help/index_installing.XML?user_os=Vista

  http://Java.com/en/download/help/index.XML For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• most have the product key, or the installation disc. Can anyone help?

  I have recently upgraded to windows 10 and hope to do a clean install, but I had not given this option. On the Microsoft site, I've been advised to go back to my previous version of Windows, 7 and then repeat the upgrade. I did and when I tried to upgrade, he did a validation test to see if my copy of windows is genuine and she failed the test. He had the validation test before that I first have to upgrade to Windows 10, where it is spent. I have more the product key, or the installation disc. Can anyone help?

  Kind regards

  Kevin

  OT:

  KFDFD

  Get Windows 10 App indicates my license is not enabled:

  

  Yet once, make sure that you run a copy genuine and activated Windows 7 or Windows 8/8.1.

  Click Start, right-click computer law (Windows 8 or later version - press the Windows key + X > click System)

  Click on Properties

  

  Scroll to the bottom for Windows activation.

  If your activation status indicates that it is not enabled, then you need to do.

  Your activation status should look like this:

  

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  If Windows 7 is a retail license, try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Also try to run the fix it and then restart your computer:

  http://support.Microsoft.com/kb/2230957/

  If you are able to resolve activation problems, your installation before performing the upgrade again:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Also check:

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files