THE LED IS OFF

Similar Questions

• Airport Extreme works but the State of the led is off

  Airport Extreme works, but the State of the led is off, it is brand new and I can set up this last but the led stays off, showing no decided (green color or ambar)

  Could someone help with this?

  Thanks in advance.

  Hardware failure - defective leads.  Take that back for a new one, as big a PITA, you should.

• Replace the LED SWITCH OFF / ON

  My LED on top of the computer does not work.  I know how to get to the switch, but I can't understand how to remove it to put a new switch in.  Any help would be appreciated.

  HP Pavilion P6000 series

  Model # p6654y

  Please refer to the manual that I linked to you in your other post. See p 38. Water-cooling holds the switch.

• Turn off the LEDs in the structure of the case

  Hello

  I was wondering if someone could help me solve a problem in a software test bench that I am developing. I have attached some of my code in which the problem is visible. I have a business structure that is triggered by a 'push button '. I want the TEST that is currently RUNNING LED remain lit until the end of the execution of the case structure (condition true) then shuts down once it is completed. But the LED does not turn off and remains lit. Is that what I can do in the condition False to activate the LED is off when the code is not running. Please note that to run the program, you will need to "run continuously. I want until the led turns off after getting the 'result' so that the software operator can know that he is free to perform the next test. But now when the 'Start Test 2 "is executed after 'Start Test', the LED stays on.

  It might be a simple solution that I can be not familiar with, but forgive me, I am a new user of Labview and I could not find a solution to this online.

  Thank you.

  Kind regards
  DPAC

  Hi DPAC.

  simple solution as requested:

  

• MagSafe 2 led is off, but the battery is charged!

  While trying to load my MacBook pro 13 inch Magsafe 2 connected led is not off leauge or green light tried to reset and upgrade to the latest update but always disabled when connected

  Please advice

  The battery in the title bar indicator shows that it is connected?  It could simple breakfast was DIRECTED into the magsafe connector is dead.

  You can also check this topic Mac, reporting system, power and see if the battery as the current power source said yes or no when it is plugged.

  If it's just the LED and you are still in warranty, just take in an Apple store for an exchange - the power brick is covered by your hardware warranty.

• How can I change/turn off the led under the speakers on Satellite P100?

  How can I change/turn off the led under the speakers? (in Satellite P100 (PSPA6E))
  Now I see the light only in the left side, but when I bought the computer left and right led line lights blue under the speakers.

  Gazz's right. It is not possible to switch off the LEDs. If just one LED is on the other must be faulty. Contact the customer Service of your country partner. I'm sure they can disconnect one too if you n t need her.

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• The led "Alarm" on my Pixma MX310 won't turn off. What should do?

  The led "Alarm" on my MX310 won't turn off. I tried "Stop/Reset" and changed cartridge. I always get the msg "Check ink E150" on the screen. What should do?

  Hello

  This error indicates in general that the ink cartridge is not seated correctly.  Please try to take out ink and back again and don't forget to follow the guide step by step by CLICKING HERE.

  If the error persists, please join our team of technical support at the following link: CONTACT US.

• Help me!!! Air-sap702i can he turn off the LED standalone ap mode? What is the command?

  I need help with the problem.

  The customer needs to put out of the LED. because it is installed in the hotel room.

  Interference LED blinks the eyes to sleep.

  I need to know the command line to disable autonomous LED of AP mode in the version of the firmware. 15.x.x

  Is it possible?

  help me T - T

  Thank you

  Phong

  Do not have this AP, but have you tried this:

  config t

  LED display off

  Scott

• Cannot turn off the LEDS on Cisco Aironet 1141

  I am trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9.  It is a standalone AP and the CLI I publish this command:

  turn off the display of #led AP (config)

  The light does not go out after you type this command.  If I "run" it appears in the config so that the order has been accepted.  Is there another way to turn off the LED?  I'm under JA1 IOS Version 12.4 (21a).

  If you have the AP 1141 under warranty, you can send an email to [email protected] / * / PA serial number and they can post you the picture ask you.

  You want to say "Thank you"?
  Ne. Just note the useful responses,
  It is more useful than 'thank you'.

• Satellite A350-212 on the fence the leds on my laptop

  Hello

  There are seven symbols that are related to windows media player on my laptop near the power button... I could close with touch first conducted before, but recently it does not work, I could not close all of the led or rather the power button close to ligtings on my laptop... I know that I don't have a big problem with my laptop but it is important to me, if you could help me with this, I'd be happy...

  Hello

  The first button turns on and off lighting
  I think you have some problems with the installed VAP (value added package).
  This is why I would recommend reinstall this package again
  Firstly uninstall the VAP system.
  Then restart the device and download the Toshiba VFR pilot European page.
  Then install again, reset the laptop.

  In order to get the FN button to work, you need to install the Flash memory card Support utility.
  If you use Windows 7, then you can download this tool updated Sat L500.

  Welcome them

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• Digital LOCKING button the LED on CAPS LOCK button - Satellite X 200

  Hello

  I just have a simple question (maybe): I recognized, that by pressing NUM LOCK causes the LED to this key to flash on, ok that is normal, but also the button CAPS Lock LED lights weak.

  Now, when I am pressing the CAPS LOCK LED becomes more clear.
  Turning off NUM Lock turns off the light, it of ok, the CAPS LOCK still burning bright (because he was in a hurry as well).
  Press CAPS LOCK again UPDATE disables the LED.

  More funny thing is: by pressing the CAPS of the forces of the Numlock lock to turn on and the LED of it...

  Any ideas or advice?

  Welcome Juml

  Hello Juml

  I read your ad 6 times now, but I still don t understand your problem. I have Satellite P200 in front of me and try to verify this but everything works fine.

  Please try to explain it again, but please, step by step. I understand what you mean.

• Not able to turn Mute or LED on / off on Satellite Pro P300 - 19 p

  I am more able to turn the Led lights on and off via the touch button with a picture of a light with a cross through it.

  Any ideas?

  First of all, you should check if this button has been configured correctly in the Toshiba button control.
  This utility is located in the assistance of Toshiba-> optimize

  Check if on / off lighting or Mute has been selected.

• Satellite 2430-301: cannot use 2200BG WLan card because the switch is off

  Hello

  I have a Satellite 2430-301, which was not delivered with WLAN functionality. But I discovered, that there is a MiniPCI slot in the laptop.

  So, I bought an Intel® PRO/Wireless 2200BG Minipci card. After that I joined the card in the laptop, it has been detected by windows as a new network device. I downloaded and installed the drivers of Windows XP (because I have Windows XP installed on the laptop) of Intel (9.0.4.17) home page. The installation worked perfectly.

  Now I tried to connect to a wireless network, but the software Intel says that the card is on 'off '. So I changed the menu drop-down on "on", which resulted in a mistake in German: "Die Intel (r) PRO/Wireless-Netzwerkverbindung ist noch deaktiviert.» Aktivieren Sie sie über your Hardware-switch. "(which means something like 'network Intel (r) PRO/Wireless connection is turned off. Turn it on with the hardware switch. »).

  Although the switch was already in position "on", I spent several times - nothing important happened. The led next to the switch will not illuminate in both positions.

  Are there problems of incompatibility between "Toshiba Satellite 2430 301" and "Intel PRO/Wireless 2200BG?

  I did something wrong?

  Is - this darn broken hardware switch?

  Any suggestions?

  I would be really happy if someone could help me :)

  Thanks in advance,
  Thuriel

  Hello

  The hardware switch led should light up if the switch is on.
  In addition if you want to use the WiFi network you must go to the WLan with FN + F8 option.
  In addition, you must check the WLan card properties in Device Manager. Here, you enter the Advanced tab. In the field of property choose radio power option and select the value to on.