the list of the comment process

Similar Questions

• I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list.

  I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list. Why is this?

  Hello

  Yes, it can be in hidden files that may cause by the virus.

  I also suggest you to see link and check.

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• The Task Manager, update the list of tasks and processes, but removes them from the list, the next second.

  It was fine a few days ago, the list of tasks and processes will not be updated until I open/close something. Now, it refreshes the list every second. I tried to change the speed of update, but makes no difference. An answer by tomorrow would be the best.

  More information:
  Windows 7 x 64
  Home Premium Service Pack 1
  Using AVG anti-virus

  Hello

  Thank you for your response.

  Keep the computer in a clean boot and check the status of the issue.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  I would like to aslso season allows you to check the status of the question in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

• During the installation process of 6 of Lightroom, I get a box that says: Windows Vista not supported.  I have Windows 7 with Service Pak1. I meet all the other requirements listed.

  During the installation process of 6 Lightroom, I get a box that says 'Windows Vista not supported'.  I have Windows 7 with Service Pak 1.  I meet all the other requirements listed.  Any ideas?

  Hi Chuck,

  You can check out the link below.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope this will help you.

  Kind regards

  Hervé Khare

• How to eliminate interference of details of the comment on the comment list?

  I wouldn't want to see username details and commentary. Assign comments there is too much clutter in the comments list.

  You can't change it.

  Friday, March 13, 2015 at 10:04, eugenelouisnel [email protected]>

• How to view several categories of items in the Web application list? Change list listbox to list box to select the category in the submission process?

  Hello!

  1.

  I'm trying to get my page for webapp of list items that are part of a few categories. I understand that if I want to see that one category, I just need to do the normal process to choose this category and put him outside. So my question is: How can I view several categories of items in a Web application on a single page. I tried this

  {module_webapps, WEBAPP_ID, c, CATEGORY_ID1, 10, 1} {module_webapps, WEBAPP_ID, c, CATEGORY_ID2, 10, 1}

  This displays only the whole of the first category, then all the other who will not succeed by date order.

  I also tried this for fun:

  {module_webapps, WEBAPP_ID, c, CATEGORY_ID1 & CATEGORY_ID2, 10, 1}

  How can I go to?

  2.

  I'm looking to allow users to enter a webapp item and allow them to select a category to link to this article.

  < label for = "CAT_Category" > category (you can choose more than 1) < span class = "req" > * </span > < / label >

  < select name = "CAT_Category" id = "CAT_Category" class = "cat_listbox" lines = "4" multiple = "multiple" style = "" height: 60px banner; ">"

  < option value = "CATEGORY_ID1" > - Option 1 < / option >

  < option value = "CATEGORY_ID2" > - Option 2 < / option >

  < / select >

  Is it possible for me to change the style of the listbox in a style box so that the user doesn't have to Ctrl + click on options?

  No answer to no. 1, but I really want to know also.

  N ° 2

  If you already know the category list & ID you can manually create a list of checkboxes

  something like this should work

• PSE9 on Windows 8.1 installation process is interrupted late in the process with the comment

  PSE9 on Windows 8.1 installation process is interrupted late in the process with the comment 'could not install Shared Technologies'. What's wrong?

  Hi pod,

  See the Adobe Troubleshooting document:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation - photoshop-elements - premiere.html #main_Error__Below_mentioned_applicat ions_have_failed_to_install__Shared_technologies_

• Is there a utility that will give me a list of all the programs or processes loaded in the startup process?

  There must be some sort of utility that will allow a user to view and edit, what programs or services that load during the startup process. In my case, during this process, a screen will appear that says; "cannot find the program. Skipping Autocheck. I need to eliminate what it comes to store the boot process.

  There is Autoruns , but it can be dangerous because it shows everything so use at your own risk

• Long running process - the comments of users

  Hello!
  
  Do you know a solution on how to reviews the status of some time to the user process running? ProgressBar or something else. Would be the ability to stop the slow operation (page) of the process as well.
  
  A.

  Hello

  Apex provide the API APEX_PLSQL_JOB
  http://download.Oracle.com/docs/CD/E17556_01/doc/apirefs.40/e15519/apex_plsql_job.htm#BGBFGBIB

  And you can also use DBMS_SCHEDULER
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_sched.htm

  Kind regards
  Jari

• Get the comment, "an error prevents photo library to save this image.

  I tried to edit my photos in Windows Photo Gallery and it used to work until about a month.  I always and only used the Photo Gallery program, but now it won't let me to save my changes that I make to photos.  I get the comment, "an error prevents photo library to save this image.  I have read many of the questions that are similar and have done the following...

  1. click on the round of departure
     
  2 type folder options in the search box, and then click the program folder Options
     
  3. Select the view tab
     
  4. in the window of advanced settings, under hidden files and folders, select Show files and folders
     
  5. click on OK
    
  6. go to the following folder (% of user is the name of the account that has the problem):

  C:\Users\%User%\AppData\Local\Microsoft\Windows Photo Gallery

  7. copy all the files here to another location, as a back up and then delete them from the directory of the Windows Photo Gallery

  Once the files are deleted, try to start Windows Photo Gallery.

  After that, go back to folder options and select do not show the hidden files and folders

  This does not work and I don't know what else to do.  Could someone help me please!

  Thank you
  Scarlet

  I tried to edit my photos in Windows Photo Gallery and it used to work until about a month.  I always and only used the Photo Gallery program, but now it won't let me to save my changes that I make to photos.  I get the comment, "an error prevents photo library to save this image.  I have read many of the questions that are similar and have done the following...

  1. click on the round of departure
     
  2 type folder options in the search box, and then click the program folder Options
     
  3. Select the view tab
     
  4. in the window of advanced settings, under hidden files and folders, select Show files and folders
     
  5. click on OK
    
  6. go to the following folder (% of user is the name of the account that has the problem):

  C:\Users\%User%\AppData\Local\Microsoft\Windows Photo Gallery

  7. copy all the files here to another location, as a back up and then delete them from the directory of the Windows Photo Gallery

  Once the files are deleted, try to start Windows Photo Gallery.

  After that, go back to folder options and select do not show the hidden files and folders

  This does not work and I don't know what else to do.  Could someone help me please!

  Thank you
  Scarlet

  ==============================
  Here's what I have on the subject... maybe a
  suggestions will work for you...

  Good luck...

  Windows Photo Gallery...
  Cannot save modified photos...
  possible solutions...

  --

  (1) I saw reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (2) I've seen reports that could clarify the next steps
  until the question... Right click the library icon and
  Choose "Run as Administrator".

  --

  (3) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  4) published by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  K. and here.
  John Inzer - MS - MVP - digital media experience

• How to activate the payroll process try again

  When I try to run the query conc "Start over the payroll process" he said value list has no entries.
  No matter what can he know why it happens?
  All of your comments or suggestions are welcome!

  There's a competitor "Mark payroll run to try again" If you want to re-run your assignmetns. But in this case, run + rollback is the same.

  Or you mark individual assignment measures (in the screen, see left most column) to be retired.

• When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

  When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

  On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

  This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

  He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

  See this article--> occurs not in Safe Mode

  Check and say whether his work after turning off hardware acceleration.

• How to print a document with the comments appear?

  I try to print a document Pages and I want the comments to be visible. They disappear in the printing process. Thanks for any suggestions!

  Hi Sara,.

  Any rejection of Pages v5 (including v5.6.1) cannot print comments. The function is not supported. You can however, export your Pages to Word .docx document, and the comments are going to survive.

  Open the Word in the free LibreOfficedocument and its printing Panel has options not only for the printing of comments in a Word document, but you want those displayed. This is due to LibreOffice using a panel of print custom. These are present in the tab more as shown below:

  

• Dangerous change in the approval process for iBooks

  you remember long time for approval of new iBooks users author books that publish their books on the iBook Store since the beginning. Originally, it was WEEKS, sometimes even months to get through the approval process. Fortunately, which improved considerably over time and now it's down to a period of 24 hours. remove your book from the store.

  I have published more than 17 books so far since the beginning of the iBook Store, and certainly, I look forward to this improvement. However, I just found out the hard way that this improvement comes with a terrible price.

  The new procedure:

  Is the approval process faster (not only) not due to more staff to go through the comments. Instead, it is due to an approval procedure has changed as it has been explained to me by the customer support. Now, the examiner spends less time going through the books to get quickly to the store. I don't know the details, but I guess they check the side more art if works and not actually reading it Word by Word.

  With this first less carefully past obviously comes a new stage. The Department for approval now takes books later (perhaps if they have more time or something) and check for any errors and delivers a ticket while your book is already on the iBook Store. In fact, at that time, that is not on the iBook Store more and this is the great potential disaster you should be aware of. If you get a ticket issued, your book get ripped the store until you propose changes and he crossed successfully a new review process, which could take days. It's wrong, really wrong, and he just happened to two of my books.

  Out of the blue, I got a ticket of the iBooks team for my book 'Logic Pro X - how it works', which lies on the line store since 2013 has been updated (and approved) last September. On one page, I had misspelled the name of "iBook" Store instead of "iBooks Store" and on another page, I got a link to the page of my book by asking readers to write a comment Amazon if they like my book. Of course, it was also a no-no (a multi-billionaire company referring to a competitor of billions of dollars with a link).

  I made the changes immediately and has the new version uploaded in an hour. But the review process took over 2 days, after I contacted support and recovery from the case. And here's the reason:

  At the moment they have issued the ticket, my book was not available on the iBook Store more, nothing, not even a mention that it is "temporarily unavailable" like Amazon. The visitors couldn't find the book, all the links from my Web site, twitter, facebook and other sites related, everything was made immediately a dead link. Not only did I lose money, I had to deal with customer e-mails explaining why they could not find the announced book. Last week, it happened with another book when I was in town for a week and had no files with me. And even once, it took 3 days to review the correction that I added 's' to the iBook Store.

  It is mind-boggling that the Team did iBook ' t think that through

  Why not keep the booking online during the update

  Why not give priority to the presentation (check two typos took longer than the initial review of the book).

  I asked the support team to issue feedback on this subject, so they can correct this procedure. In the meantime, you better watch for potential new tickets, or someone had the same problem already?

  HI Edgar,

  It's really good to know. Thank you

  Difficult to have a work around for this.

  (Got a ticket) Right now, I'm waiting for approval,

  After correcting a few minor problems.

  I hope this will get fixed soon.

  I like your idea to keep the original "approved."

  live version, until the update is approved.

  Should be a simple and logical

  changes to the procedure.

  Kind regards... Thomas

• Satellite A100 - messages of weird info during the recovery process

  This is the first time I tried to recover my Vista PC from Toshiba.

  During the recovery, I got this in CMD

  "C:\boot(something here) restore s Descriptor." seq. 26 - SACL rest. "
  "C:\SWStamp.txt s restoration Descriptor. SEQ 25 - list SACL will not go away.

  (1) is this normal?
  (2) what it means?
  (3) I even did a FULL format?

  Thanks a lot guys

  Hello

  During the recovery process, you will see some messages, that's nothing unusual
  Important is that the procedure does not stop but continues and after some time, the Win operating system should complete the installation
  Wait a bit and see if the procedure would end...

  If the procedure to hang himself, then start recovery and boot from the disc reocvery...