The off-line media reviews = crazy me

Similar Questions

• After installing new cartridges, printer icon says printer is off line. Tried to go in the passage of the off-line online, without any change.

  The printer itself doesn't seem to be the problem. Have disconnected the cables, and the message is offline, offline. Reconnect and he said just in offline mode. This makes me think that it is a software that I'm not waking up switching.

  I did the online diagnostics and he thinks that the printer is turned off. But it's not. Were do form here?

  "After installing new ink jet cartridges.

  The problem began after you opened the printer.

  I suggest you contact the manufacturer of the printer.

  See you soon.

  Mick Murphy - Microsoft partner

• Menu line "Media Remote Device Registration" away to the M15 version. R.163 under "network settings."

  When I scroll under "NetworkSettings" I can't find the menu line: "Media Remote Device Registration.

  I use a BDP-S5100 and can play music, videos, etc. from my wireless Z30 or PC by using the RMT-B119A remote console.  When I try to do the same thing using the apps: "Media Remote" or "TV Sideview" on my Z30, I can't add my Blue-ray player because I was not able to record due to the "missing menu line" (?).

  When I check the line: "Inscrit remote devices", it shows: "there are no registered devices.

  Any ideas? Do I need to have a Sony television connected to the OTP to make this line of menu "appear"?

  I tried to reset my OTP and started setting up again but no luck.

  Using Miracast to play videos, music and photos worked great in dynamic mode, but I couldn't establish a stationary Miracast that would broadcast to tell You-tube movies. Is there something in the Protocol of Sony Miracast missing (?). If I try the same configuration on a Viewsonic WPG - 370 everything works OK.

  Any ideas here too?

  Otherwise, the BDP-S5100 is awesome.

  Yes, you must connect the BDP-S5100 to TV before installing SideView TV App. Please click here for more information.

  If my post answered your question, please mark it as "accept as a Solution.

• A key using self-powered USB causes the base station go "off-line".

  I found that by using a USB drive self-powered, as the WD My Passport, without a USB powered, hub attached to the base of the station USB port has caused the base station go "off-line". In fact, using a powered hub does not always remedy the situation, but it is more reproducible without one.

  This is true for the AirPort Extreme and Time Capsule 802.11ac. The problem does not occur immediately, but it may happen over several days. The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  My question is if others have had the same results? ... and did you find permanent solutions?

  

  USB key "seems" less reliable on the airports of AC model than on previous versions.

  I tend to not use USB attached to routers because I think it's convenient mediocre and poor speeds. But I tested with previous models, and it seems ok...

  KT those a few posts here a me trial there. These are not self powered readers... who I have long recommended people avoid the use (without a powered hub)...

  Re: External backup drive down regularly

  In fact, the wire is different from what I remember... Age don't you know.

  But I did the test on an AC TC. The result has been very reliable. He did not cause the TC to close... but I lost the connection of the USB almost every day... except for a trial where I kept the USB drive mounted in the Finder... so that the USB drive wouldn't turn it down. He then worked for a few weeks... until what the noise of rotation of disk (sitting next to me) drove me crazy... as soon as he was mounted is more, he would pass the same existence as before.

  The previous model TC was barely big enough for the internal use of the power supply units. So powered car running disc was impossible.

  Provide EI (GEN 1-5) at 1. 8A and 12v was adequate, but the standard USB port is estimated at 500 my wrong to manage disks free power.

  You would certainly think AC 12v 5A power supply models would have a lot of power. Yet, power problems are a major problem still. Supply is extremely sensitive and stop easily for reasons I'm still to understand.

  Where the long threads on power issues to the AE.

  Now, I'm going to speculate... I think that SOME problems are associated with power.

  What is the USB port side in airports of AC? Is it still 500ma? Apple never seem to give easy to find info on these details.

  Do you know? I haven't measured it, but I can try timing the time it takes to charge a phone.  Assuming that it will immediately trigger.

  Then he will have problems with a self-powered drive. Even if the drive has less energy than quotes, current during starting is much higher. The restriction of the power on the USB port is managed by a self regulator recovery... Once you triggered it, you must stop the power... then reboot the machine to restore power.

  Then, I also did the test with hub powered... and like your results... It was better. Longer time between the drive disappears from the network. But it was not enough to stop it.

  There is another interesting effect using self-powered hubs... I discovered this on a computer running Mac OS lets say! The computer would not start with a powered hub connected to the front USB. Hubs self-powered cheap, showing a defect in their design. They can refer to the USB port. In this computer, it was enough to stumble on the good power circuit and prevent the supply, commissioning... As long as the computer is running, everything was fine... but if I turned off it would not start. I finally woke up I had to exit the USB every time. At one point, I made a "special" Cup USB cable 5v line so the hub can stay connected. You can probably just to isolate the 5v of contact in the USB. Regardless of the configuration of power USB in the AE or TC is as you can assume she's sensitive enough... and at any time when the 5V on USB hub exceeds the 5V in AE it could trigger.

  The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  Endangered of AU base station is not uncommon.

  It responds to the pings? I guess he still has lights but is he blocked? You still get internet through it?

  Try to open it manually in to THE... use of the file / configure from others and put the IP address of EI.

  Talk with me by e-mail... It is open in the profile.

• Where is the Setup off line 36 of FireFox?

  The stub Installer cannot go beyond my firewall proxy employers. 34, I could download an offline Installer. I can't find the Installer off line 36.

  Hi, you can download the offline full installer on https://www.mozilla.org/firefox/all/

• e-mail program takes all the mail out to 'off line '.

  I own a MacBook Pro.  I've updated to Capt. 10.11.5.  The e-mail program takes all the mail out to 'off line '.  Is no more, I can send emails.  What should I do?

  < re-titled by host >

  When the mail is opened, click window in the menu bar and run the connection doctor.

  All that said SMTP is your outgoing server, what is the message next to the ashes?

  This article may also be useful:

  If you cannot send or receive e-mail on your Mac - Apple Support

• 1415 CM cold Color mfp goes off line when a pc Windows 8 joined the Group

  I have a network that uses a Sprint MiFi unit as the access device and router. My printer the CM1415 worked for two years with reliability when my old PC is connected A Toshiba laptop with Win Vista 64 bit and a laptop from Sony with Win 7 Ultimate. My nexus device 7 can even connect to the internet without problem. I recently purchase a Lenovo all in one with Windows 8 every time that this machine is running the printer is offline, and even if it is reset it goes off line almost immediately. The Working Group on all of the PCs is the same, and all of them continue to be able to access the Internet. When I disable the machine Win 8 and run the network Test the printer resets and works very well.

  Any ideas out there

  Hey Mrstenter.  My problem is solved, here's what I did to solve

  1 mobility Homegroup in the Machine of Win8 (no effect)
  2. change workgroup in network on behalf of our working group (no effect)
  3 reset the device MiFi Sprint factory and recreated the network using a different SSID and a both reconnected the old PC and reconfigured the network connections and the printer. (everything worked as before)
  4 added Win 8 PC and connected and the printer is still alive and active for all. HP said that the Protocol of security WPA-2 was not supported but my Sprint MiFi would not allow me to reset and it worked before

  You may not have gotten the Jist but the printer has worked for 2 years on the network before. I just added the Windows 8 PC that broke the connection for other devices on the network whenever it was turned on.

  WPA2-psk might not be supported, but it worked and doesn't work always, and until I physically change my Sprint MiFi, I have no other options maybe it's a hardware failure, but it is what it is.

• HP OfficeJet J4660 all in one appears "off-line" and the function desappears scanner

  Original title: device

  HP OfficeJet J4660 All in one – [1] it has been properly installed on the computer - DELL - Vostro. [2] he worked very well; [3] after a while, it appears "off-line" for all its functions. The scanner function desappears. What should I do?

  Hello

  · What is the operating system installed on the computer?

  You can follow the procedure in the article: "the printer is offline" Message appears on the computer and the product will not print HP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=sk&dlc=sk&lang=sk&lc=en&product=3692891

  You can also run the tool of diagnosis of HP for printer and scanner of concern:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=32965&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3692891

• I just got my computer from Vista to Windows7... Problems with the sites game requiring shockwave remains... Get knocked off line every few minutes... What can I do to stop this? __

  I have problems since I changed my computer from vista to windows7... Sites game requiring shockwave remains... I get knocked off line every few minutes... Why? How can I stop this?
  

  Hot4Lefteris,
  The first thing I would say (if you have not already done) is to ensure that you have the latest version of Shockwave installed.  If you have still a problem, I would like to run IE without Add-ons and then put only the module Shockwave Player and the test.  Also, follow the other steps listed here and post back with the results.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

  I use a laptop and move between two locations each with its own printer.  Whenever I move, I have to change the default printer by opening printers & faxes from the control panel.  Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

  Hi Tom,

  If the default printer is not in offline mode, it will detect the different printer but it will not be a default one.

• Using Windows 7 and 8.1 of Windows via a shared house group the WF-2540 Epson printer is off line.

  Original title: printer is offline

  using Windows 7 and 8.1 of Windows via a shared house group the WF-2540 Epson printer is off line.  This printer uses with two PCs using Windows 7 and a PC using Windows 8 with no problems.  Today it usually just printing using 1 PC with 7-1 8.  It is connected to the PC works well.  This isn't wired wireless we have wireless at the office.   Use this way for years with no problems, then suddenly this morning its all stopped.  I read so much information on it with no satisfactory response.  Epson will not know that it is not connected via radio or directly with a PC, so I'll through in circles.

  I reinstalled the PC on Windows 8 PC nothing works.  Any suggestions as to what I can try next as business has ground to stand without the printer!

  Thank you

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our TechNet Forums social as this question right here.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Sincerely,

  Ankit Rajput

• Cannot print the printer is off line with 14 documents pending.

  Original title: Printing print HPrinter
  My printer is off line with 14 documents pending.  How can I get it online and cancel pending documents.

  Hi Helen,

  I understand that your printer is off line and there are 14 documents waiting in the queue.

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  

  Method 1: Run the printer Troubleshooter and check.

  a. open the printer Troubleshooter by sliding in the edge right of the screen, tap Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), entering the Troubleshooting in the search box, by typing or clicking on settings and then type or click on find and fix problems. Under hardware and sound, click use a printer.

  b. follow the steps in the resolution of the problems.

  If the method above does not work, proceed to the next method.

  Method 2: Disable the documents waiting in the queue, check the following suggestions.

  a. the key press Windows + R and type services.msc in the search field and press to enter.

  b. the Services listed, stop the print spooler service.
  (c) in Windows Explorer, navigate to the folder below and open the PRINTERS.
  C:\Windows\system32\spool\PRINTERS
  d. click on continue or Yes (if prompted by UAC) to approve the opening of the PRINTERS folder.
  e. remove all files in the PRINTERS folder, until it is empty, and then close Windows Explorer.
  Note: DO NOT DELETE the PRINTERS folder itself. Don't delete its content.
  f. open Services, and then start the print spooler service.

  Also see suggestions from the following link:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  After completing the methods suggested above, answer us with the State of the question.

• Prevent Outlook Express from electronic filing according to the subject line

  Because the email responses have the same object as the original, we used to review the answers according to the address or the date of the response.  But Outlook Express recently began producing the answers under the subject line and adding a sign plus [+].  This makes it frustrating to find the answers later if you don't remember the subject line.  How can we turn off this "feature" in OE?

  While in the folder that contains your "classified" messages: view | Current view. You want to display all the checked Messages, but No Messages by Conversation Group. Bruce Hagen ~ MS - MVP [Mail]

• Icon for line/off line is missing

  T - Bird sometimes falls in off-line mode and I never know until I try to send a message, says I'm in off-line mode and I like to go back online. This happens when the ICON SHOWING HIS off-line IS MISSING. At the same time, it was in the corner of L/R. How can I get that back?

  The menu bar, select View-Toolbars and make sure that the status bar is enabled.

  No menu bar? Press the ALT key.

• Why most of the tabs open empty with the label "New tab" and "topic: vacuum ' in the address line to the restart of Firefox since installing Firefox 28?"

  I have a system dual-bootable Windows Vista SP2 and Firefox updated to 28 on both systems. Since the update of the tabs more reopen empty with the label "New tab" and "topic: vacuum" in the address line of Firefox is restarted. The tabs that open correctly seem to be those who in fact, I was at the session of prefious. I can recover the missing tabs using the Session Manager to pick up a previous session, but of course it does not pick up the tabs open in future sessions. It seems that the tabs that I go to the session recovered are saved correctly, as indicated above, but which are not revisited in the context of the use of the session retrieved will drop the URL next time that I open Firefox it again.

  jdgale:

  I don't have the time to do it. However, 29 is just around the corner and we will put in the channel of exit 29, then hope that the issue is not you.

  P.S. I had originally chosen your last answer as the solution that you have migrated more to 29 but it seems that you have taken off. I'll be marking your last answer as the solution so that we can get out of the queue.