The OpenLDAP Foundation Services will not start

Similar Questions

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.

  When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.  I can't see if any firewall or antivirus works etc.  Anyway to reinstall the Windows Security Center or is there something else I can do.  Concerning

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow the procedure described at the link below and check if it will help: error message when you try to open the Windows Security Center in Control Panel on a Windows XP computer: http://support.microsoft.com/kb/919291

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• problem updating SP3 after a reboot at the end of the update process, IE8 will not start

  I have no problem updated from sp2 to sp3. However after a reboot at the end of the update process, IE8 will not hold. When I click on ie, computer absolutely crashes. Help, please

  Restart your computer and if restart is ok are not trying to run IE8. Go to add and remove and remove IE8 and your computer will be re-established on IE7.  If all is ok so far restart your computer once more and if everything is ok at this point you can download IE8 again.

• Have a computer dell laptop. try to install the printer but the spooler is not running. I started the spooler, but it will not start. What is the problem

  I want to install a Hp deskjet printer downloaded 1000 Hp and installed, software is gone at the end of the installation and can not end spooler spooler running nut or an rpc error. Had a Hp technician to try to set up the printer spooler, but he will not remain in the start mode. I have restored the computer to a previous restore point and reinstall the software of the printer again, but have the same problems.

  Hello

  What exactly happens when you try to print? Error message? Previous post the exact error message.

  Step 1: Run the fix it tool in the following article and check.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Help and Support service will not start

  Nice day

  I use Windows XP Professional on my laptop HP DV9000.

  When I try to open the help and support service, I get a message saying "Windows cannot open help and support because a system service is not ongoing enforcement. To resolve this problem, start the service named 'help and Support." »

  I searched many websites for more information about this problem without success.

  I tried to locate the program itself and once again without success.

  I did nothing to my laptop in some time (months) and have installed SP3.

  I tried to follow the instructions in my research, I hope, it's enough to find help here.

  JC

  Check here: Control Panel, tools, Services, administration, scroll down to: help and Support, and then double-click to open the page.

  Startup type: automatic

  The service status: click Start, click OK

• The Windows Audio Service does not start

  I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

  Hi JamesSimpson11759,

  ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to run the Microsoft Fixit and check if the problem still persists.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  You can also view the article mentioned for more information:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know the results.

• Need help after you apply the updates. Computer will not start.

  The computer in question is running XP Pro.  He applied updates should then stop.  When I tried to reload I couldn't do.

  It's as if the power is off.  There is no fan noise when I push the power button, nothing.  He tries not to POST and there is no beeps.

  I can obviously not use a boot disk and restore console, or try safe mode.

  There may have been a blip in power when the system applied updates, but I don't know.  Everything else on the same surge protector does not have a problem.

  Hi bigten333,

  As the computer starts not yet to the scene where you see the manufacturers logo, it's a hardware problem.

  I recommend you contact the manufacturer of the computer,

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox goes to the crash report and will not start when I try to open it

  Crash ID: bp-9dc68df0-f096-454c-82c3-e32bf2130531

  Whenever I try to open Firefox, it goes immediately to the crash reporter who said 'we're sorry. Firefox has been a problem and crashed. We will try to restore your tabs and windows when it starts. »

  I ran Malwarebytes, Super Antispyware, Kapersky Security Scan, Spybot and Microsoft Safety Scanner and none of them does not seem to work. Also, I tried to uninstall and reinstall without success. I have included my Crash report for you to review. Please help me with this because I am full of ideas.

  Perfect! I never really had the enough can recorder installed on my computer, but I installed a Call Recorder for Skype. It didn't work the way I thought that it would be so I uninstalled. I couldn't remember that it was so I installed each recorder of Skype, that I could find including nice may one. Then I did a complete uninstall of each program using the uninstall program supplied with Advanced SystemCare. I restarted my computer and now it works! Thanks for the help!

  P.S. I was able to find an immediate temporary fix yesterday by browsing through another forum where one of the mods had a fix. He said that the issue had something to do with DEP.

  Here is his discussion with another Member:

  ===========================================================

  In General, when an accident of app, or crashes, a record is made in the event viewer. (type eventvwr in the search) go into windows journal > application tab.

  You are looking for critical errors (they have red in the left hand column)
  

  Look for the application, the app blocking crash or anything related to the problem
  
  

  When you find them write down the Event ID and source code and tell us what they are. I have a sneaking suspicion it will be event ID 1000 source 100.
  
  

  Let us know if you need help

  Hey guys, I'm so glad I saw this thread I have problems very similar to POS.
  
  
  Basically, I just recently implemented a new system and installed Windows 7 above. This is where my first errors have occurred, getting an error of installation on the first try to install Win7. I had a look around the web trying to solve this and got through the installation of the second time around.
  

  However, after having the computer for a week now he acted strange throughout various errors and a blue screen appears from time to time.

  I get blue screens, IExplorer, COM Surrogate and Explorer Windows Defender-a stopped working, even my sfc/scannow was interrupted due to the error... This is my first experience with this type of problem and I haven't really found someone with a clue on this subject yet.

  Until I read your reply, zigzag3143. I had a look at my eventviewer out of curiousity and it just so happens that it is full of Error Event ID 1000, Source code 100, with Source stated as Application and my Avira Antivir Personal antivirus software. It should be noted that prior to Avira I had Avast antivirus installed, so I don't suspect the usual antivirus issue.
  

  Yes, zigzag3143, what exactly is this event 1000 code Source 100 all about? It would be so nice for a change, to get this resolved from the first post on the web, you know? Haha, anyway, I cross my fingers that you can crush it for me.

  Thanks.
  
  
  
  

  I beg of you. I thought it was that but wouldn't you jinx. OK Event ID 1000, 100 source is often caused by a built-in virus protection app called adj. Dep, or DEP data, prevent applications (read virus) to launch in 'protected memory space. It is almost not necessary but that's another story.

  He find. It is located in your system control panel > advanced system settings > Advanced Options > performance settings > DEP

  -Default is MS apps only (I think) what ever he is set to change. If that does not cure the problem, you can even turn it off. There is a turorial here on this. http://www.Vistax64.com/tutorials/12...ble.html?LTR=D

  Let us know if she continues

  ===========================================================

  LONG STORY SHORT... I just did what he said and follow this link to
  Learn how to turn off my DEP for a quick trouble so if someone reads this and is a problem, it can work for them, as well.

  Your information help me with a permanent fix because I have activated DEP before I restarted and now everything is back to normal

  Thanks again!

• Impossible to update Windows 7; Service will not start, get "Access denied" error then message 0 x 80070005

  I can't start the Windows Update. I tried to start the service in the services menu. I received the "access denied" message then message 0 x 80070005.  have no idea what it is. The PC is a Dell desktop computer around the age of 4 months and no other problems. McAfee virus proctestion updates Windows 7 amd dual core, thin PC works well. Although I would really like to start my service. I checked the Dependices and are all in service and has begun.

  * Title *.
  I can't start windows updates. I go to the services section of my new pc Dell desktop windows 7 amd dual core. the__message says "access denied." message 0 x 80070005. I have NO idea what it is and now I can't update. The PC works well otherwise

  A trial free McAfee or Norton came pre-installed on your computer when you bought it?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  There is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

• RAM installed on the Vista PC, Vista will not start, but switches to Safe Mode?

  I work on computers for years on the side and have done my fair share of upgrades of RAM. I went to my boss to Jeanne to update its ram, it has a Vista computer ~ 4 years with 512 MB of RAM, (a stick). I upgraded to 2 GB. There are 2 white and 2 black slots. The 512 was the white slot. I have it pulled and replaced with 2 GB then put the 512 in the dark. It starts and went to the vista loading bar, then the screen went black. Waited a while and put the 512 where he was and then added 2 GB sequentially. Same result. Then I tried the double approach channel. I also tried just the new RAM. Same result. I EVEN tried to put just the an old back in its slot and it STILL would not initialize correctly.

  Here's the interesting thing. Safe mode and safe mode with networking mode both start instantly. No problems. Properties system shows 2 gb, rebooted and went into the CMOS and recognizes all the correct RAM in the correct locations.

  Now, it should have been a simple exchange and pop so I don't have the computer with me, any suggestions?

  I followed the other suggestions and nothing worked, including pulling the battery for 15 seconds.

  It is a Dell Dimension E521. I have triple checked the RAM before I bought it.

  When I arrived, he had already the computer is off, so I just open it without putting work first. In fact, I ordered the computer home, on this computer on Wednesday of last week. The computer is very slow, but worked

  Apparently you do not see where I said I have triple checked the RAM before I bought it. in any case, after 5 hours of trial and error, I was able to make it work

• Queue after you have reinstalled the new MacBook Pro will not start SOUL

  MacBookPro, 2.8 GHZ Intel Core i7, 16 GB of RAM

  OSX 10.9.4

  CC 2014

  Hi, I used Migration Assistant to copy the data from my old machine to a new MacBookPro. At the launch of CC for the first time there was a lot of error messages, so I uninstalled all my Apps CC and began to resettle. PP and AE work perfectly but the SOUL doesn't "start queue" and hangs on exit. I tried different codecs. I tried to uninstall and reinstall SOUL. Short of a clean reinstall of OSX and to leave without using the Migration Wizard, anyone have any ideas? Thank you.

  If you can take a look under My Documents > Adobe > Adobe Media Encoder > 8.0 > Presets?  If you happen to see a link to alias for Presets, remove it and revive the SOUL.