The performance analysis section

Similar Questions

• Analysis of the performance of the import report

  Hello
  I ran the import analysis report in FDM and he tells me the time taken by each step of the import process. My question is why does time for "Memo reallocate Time." I don't do anything with Memo. Is there a way to avoid the time to reallocate memo.
  
  Thank you, AJ

  This is the time it takes to treat groups of logic.

  If you found these useful or appropriate validations, please take the time to score.

• How can I improve the performance of my compaq presario V2000, its very slow

  How can I improve the performance of my compaq presario V2000, its very slow!

  According to many things (specifications, you have now installed vs the programs he came originally with programs, etc.)-it may or may not work better that ever he does now.  However, in terms of nothing other than the software and others on the subject - there are some things you can do to optimize performance.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• The Performance counter requested is not a custom counter, it needs to be initialized read-only.

  I use SAGE ACt! database and I get this error message after loading.  The Performance counter requested is not a custom counter, it needs to be initialized read-only.

  Does anyone know how to remedy this?  I talked to the WISE and they say it's a problem of Windows registry, but I don't have the knowledge to deal with this.

  Hello

  Thanks for posting your query in Microsoft Community!

  Can I know what Windows operating system do you use?

  I would like you see below and check if that helps.

  Error message "Performance counter is not a custom counter, it needs to be initialized in ReadOnly" when you run Microsoft Dynamics CRM 4.0

  http://support.Microsoft.com/kb/958377#appliesTo

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• KB973687 - msxml3.dll msxml6.dll - services.exe uses excessive virtual memory, the performance impact on the first logon after restart

  Since the installation of fix KB973687, I had several SP2 and SP3 systems exhibit behavior that makes them unusable until after the first logon is completed, which can take up to 20 minutes.   I've identified the patch (KB973687) and DLLs, that it will update the origin of the problem, but uninstalling the patch does NOT return to normal operation.

  I need to understand how to upgrade these systems WindowsXP SP2 and SP3 to restore normal operation, reinstalling Windows, programs, and settings is an expensive solution.

  The performance problem is caused by services.exe slowly consumes about 1.5 GB of virtual memory, and then slowly releasing.  This seems to be triggered by the first logon after restart, this connection is very slow, the screen is blank for most of it, there might be failures of allocation memory during logon.  Once complete this opening of session and memory usage returns to normal levels, recording and return to work normally as do other operations until the system is restarted.

  Spent a lot of time working with SysInternals Process Explorer, trying to find what specific service might be involved, lightweight system for bare essential services with no luck.

  KB973687 seems to offer only two files msxml3.dll and msxml6.dll.  Uninstalling this patch, resettlement V3 and V6 of the XML parser fail to restore normal operation.

  Not all systems seem to have place still restrict the differences.  Systems that are appear to be the oldest, with Windows XP has been installed for at least a year, installed Microsoft Office and Adobe Acrobat.

  Looking for these forums and the Internet, I believe that many have encountered this problem, but have not is it this level of analysis, seem most attribute it to a virus, I see several start explorer.exe manually, I didn't know all the alternatives before reinstalling Windows.

  Found the solution, the following has been fixed in System Cleaner of Comodo 2.2.129172.4:

  "For some strange reason, after changing some settings of the system with the CSC LastGood.tmp Directoy began to constantly be read from my hard drive. This would occur up to about 90 to 99% of my memory was used and then stopped, begin to free the memory, and the system began to slowly to function normally.
  I used the process explore from sysinternals to help diagnose the problem with any process other than services.exe using memory.

  I used sysinterals filemonitor to see LastGood.tmp directory has been read repeatedly.
  After you have uninstalled CSC the problem has been resolved. »

  Even with the effort to find the solution, it was better to reinstall.  Hope this solution helps others.

• Upgrade Windows Vista to Windows 7 will reduce the performance of my PC?

  I look to upgrade my laptops Windows Vista Edition software Home Premium to Windows 7 Home Premium! My laptop can be slow sometimes and I was wondering, the upgrade to Windows 7 will make slower or it will just remain the same?

  Hello

  We cannot advise you as to which is better/more fast/slow more of your particular computer.

  But we suggest you follow these steps before moving on to Windows 7.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  ______________________________________

  And how to improve the performance of Vista:

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Need help how to make "Foglight and Performance analysis CLI - Windows Installation of" because my FMS_HOME is in Oracle. Please notify.

  Please guide me the Foglight command-line installation as I'm not sure how can I continue because my FMS_HOME is in Oracle.

  It seems you are trying to install Foglight agent manager by using the command line installer to ensure the follow-up of your Oracle database.  Foglight Oracle agent can be run either on the Oracle server, or another place as a remote agent locally.  As an agent remote is most common.  In general, this isn't your office, btu a server.  The FMS or another utility server.  You would normally run the installation program from the command line on the computer you want to monitor Oracle of.  Then the agent would run there and collect information of your Oracle instance.  You also mention the analysis of performance in the subject of this thread.  For Performance analysis, which must be a local installation on your Oracle server, but it's a different Installer than indicated above.

  Jeff

• I ran the system analysis tool and without result updates still won't work.

  * Original title: Windows 7 updates

  It seems I'm not the only one having problems with the updates of Windows 7. I ran the system analysis tool and without result updates still won't work. Is it possible miss me a the question .dll file not showing? I googled about it and still nothing.

  Appreciate any info someone might have on this

  Are there specific error messages or error report numbers given when it fails, or is it just apparently running, but does not find anything?

  If it is running, but apparently not finding anything, just leave it for a while 'loooooong. It was reported a few recent Wu take many hours to find anything, esp if she has a lot of updates to find and install.

  If its reports an error/message number, what (exactly) do report?

  Something to try:

  Update your anti-virus software and run a full scan. Then:

  If its doesn't work, check that service 'Windows Update' and 'Background Intelligent Transfer' are listed and running, according to the instructions of the ' how to check if services are running' section of this article - https://support.microsoft.com/en-us/kb/2730071 IF you have actually the error referred to in article, try the FixIt.

  If WU and BITS services are listed and running, try to reset the Windows Update components - https://support.microsoft.com/en-us/kb/971058

  If still no joy, run the update utility - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter what makes as that report?

• How do I optimize the performance of windows 7 with freeware tool or tool?

  How do I optimize the performance of windows 7 with freeware tool or tool?

  Hello

  As Frederik advised, saving No. tune-up, not so-called Optimizer program, no registry cleaners should be used.

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Problem with WEI: could not measure the performance of video playback.

  Hello, Microsoft

  First of all I'm new to the forum, Please warn me if I posted in the wrong section, or did something wrong.

  I have a laptop, (x 86) Win7 Home Premium. Before posting, I tried everything Microsoft sugguests and nothing will do, as the update of the graphics card, etc. WEI did not work as usual today, I got the problem said: could not measure the performance of video playback.

  Here is the winsat.log

  180337 (1304) - winsat\logging.cpp:0815:-BEGINNING 2014\1\23 20:20:42 -
  180337 (1304) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 0f602be3-3268-4fb8-be81-0ebe47022e9b
  180337 (1304) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
  180352 (1304) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
  180399 (1304) - 4585: Watch dog system active
  180399 (1304) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
  181491 (1304) - winsat\main.cpp:2505: > DWM doesn't work do not.
  181491 (1304) - 2470: > EMD service will be restored to the exit.
  181507 (1304) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode
  181507 (1304) - 2793: > power policy saved.
  181928 (1304) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
  181943 (1304) - winsat\main.cpp:2814: > policy set to maximum power.
  183020 (1304) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
  183020 (1304) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
  183035 (1304) - winsat\main.cpp:1775: > Run Assessment features
  183566 (1304) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
  184190 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  184190 (1304) - winsat\processresults.cpp:4018: > wrote bandwidth video memory to register 0
  184190 (1304) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS
  184190 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  184767 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  184767 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  185344 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  185344 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  185906 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  185906 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  186467 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  186467 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  187013 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  187029 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  187591 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  187591 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  188168 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  188168 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  188730 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  188745 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomF4-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 150; 200; 241 - batchcnt C (50); C (200); C (300) - objs C (12); C (26); C (45) - noalpha-geomf4shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  189291 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  189291 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomV8-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75; 100; 120 - batchcnt C (25); C (100); C (150) - objs C (8); C (17); C (29) - noalpha-geomv8shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  189868 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  189868 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname CBuffer - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75 - batchcnt C (25) - objs C (8) - rendertotex 6 - rtdelta 3 - texpobj c (1) - cbuffershader - cbufa 2 - cbuff 5 - cbufp 6
  190430 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  190430 (1304) - winsat\main.cpp:1775: > Run Assessment mfmedia-input C:\Windows\Performance\WinSAT\winsat.wmv - nopmp
  190804 (1304) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0 x 80070070 == ERROR_DISK_FULL
  190804 (1304) - media\mediaerror.cpp:0095: error: failed to start NT Kernel Logger.
  190820 (1304) - winsat\main.cpp:2056: > assessment mfmedia FAILED because of an error
  190836 (1304) - winsat\processresults.cpp:4018: > wrote bandwidth video memory to register 0
  190836 (1304) - winsat\processresults.cpp:1274: not limiting DWM Score 1.0 - no DWM performance score
  190836 (1304) - winsat\processresults.cpp:1405: this WDDM, considering D3D score 2.0
  190836 (1304) - winsat\processresults.cpp:1480: > partition disk writes in register 0
  190960 (1304) - winsat\syspowertools.cpp:1015 >: 381b4222-f694-41f0-9685-ff5bb260df2e value of the power system active"
  190960 (1304) - winsat\main.cpp:2855: > state restored power.
  190960 (1304) - winsat\main.cpp:2870: > Successfully reenabled EMD.
  190976 (1304) - winsat\main.cpp:2896: > SystemRoot Composition
  190976 (1304) - winsat\watchdog.cpp:0311: Watch dog system shutdown
  190976 (1304) - 4909: > exit value = 1.

  Please help, THX 1 billion

  Hello Derek,.

  Please keep us updated on the status of the issue.

  I'm sorry for the late reply.

  The IFE can be used to show what part of the system should provide the largest increase in performance when it is upgraded. For example, a computer with the lower under-score in his memory, would benefit more than an upgrade of RAM to add a faster hard drive (or any other component).

  Also see this article:
  What is the Windows experience index?
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-experience-index#what-is-Windows-experience-index=Windows-7

  I hope this information helps.

  Thank you

• Computer laptop Compaq PresarioCQ40 using Windows 7 32 bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section.

  My laptop Compaq PresarioCQ40 running Windows 7 32-bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section. Properties, I found that these two elements with problem are found on "Microsoft Bluetooth enumerator.  I tried to run Windows update to get the driver but it says no update available. And I can't find this driver online. Can someone help me solve this problem? Thank you very much

  Hello

  Perform the steps in the link and check.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Hope this information helps.

• Foglight Management Server and Foglight Performance Analysis Server

  Running:

  1. Foglight Management Sever (5.6.4.0) on Windows Server 2008 R2 x 64, 8 GB of RAM, 40 GB of storage, 4 vCPUs
  2. Foglight Performance Analysis Server (7.0) on Windows Server 2008 R2 x 64, 8 GB of RAM, 120 GB of storage, 2 vCPUs

  Both are running on virtualized servers.  We are moving our servers to a new data center and I wonder to combine these two servers.  I am unable to find any documentation that provides configuration information to support this and support of Quest also recommends maintaining that separate them (as they are not all supporting documents).

  My question is this, can you successfully met these two services on the same virtual server?  I am someone of hope and can give an overview if they have had problems or not (what to watch out for, etc.).

  Keep us separate database server yet and who will broadcast another SQL box.

  In general, the recommendation is to run these on separate dedicated servers. May I ask why you guys would like to group together? Please keep in mind that these two engines can expect to perform heavy work loads and you could increase your risk of hitting problems if you had to consolidate them. Just my $0.02 - it could be that useful.

  Robert

• Should we leave how much free space on the C drive before affecting the performance and speed?

  Hello!

  Hard drive of my new PC (C) is 1 TB (processor Samsung 7i, Windows 8.1). It doesn't have any other disk/partition. How this space is safe to use to store large files (videos, esp., stored in the native video library file) without harming the performance and speed?

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Thank you!

  Anna

  Sunday, March 1, 2015 10:59 + 0000, AnaFilipaLopes wrote:

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Planning your Partitions

  The Question

  Partitions, how much should I have on my hard drive, what do I use
  each of them for, and what size should each one be?

  It s a common question, but unfortunately this doesn t have a
  only simple, just answer to all the world. A lot of people will respond with
  the way they do, but their response isn't necessarily best for the
  person seeking (in many cases it isn't right even for the person)
  response).

  Terminology

  First, let's rethinking the terminology. Some people ask "should I".
  partition my drive? That s the wrong question, because the
  the terminology is a little strange. Some people think that the word
  "partition" means divide the drive into two or more partitions.
  That s not correct: to partition a drive is to create one or several
  partitions on it. You must have at least one partition to use
  He who think they have an unpartitioned disk actually
  have a player with only one partition on it and it s normally
  Called C:. The choice you have is to have more than one
  partition, not that it's the partition at all.

  A bit of history

  Back before Windows 95 OEM Service Release 2 (also known as Windows
  95 (b) was published in 1996, all MS-DOS and Windows hard drives have been set
  using the file system FAT16 (except for very tiny to aid
  FAT12). That 16-bit only because were used for addressing, FAT16 has a
  maximum 2 GB partition size.

  More than 2 GB of hard disks were rare at the time, but if you had
  one, you must have multiple partitions to use all the available
  space. But even if your drive was not larger than 2GB, FAT16 created
  Another serious problem for many people - the size of the cluster has been
  more great if you had a larger partition. Cluster sizes increased from 512
  bytes for a partition to no greater than32Mb all the way up to 32 KB for a
  partition of 1 GB or more.

  More the cluster size, the space more is wasted on a hard drive.
  That s as space for all the files is allocated in whole clusters
  only. If you have 32 KB clusters, a 1 byte file takes 32 KB, a file, a
  greater than 32 k byte takes 64 k and so on. On average, each file
  about half of his last group waste.

  If large partitions create a lot of waste (called "soft"). With a 2 GB
  FAT16 drive in a single cluster, if you have 10,000 files, each
  lose half a cluster of 32 KB, you lose about 160 MB for relationships. This s
  back in an important part of a player that probably cost more than $400
  1996 - around $ 32.

  So what did the people? They divided their 2 GB drive in two,
  three or more logical drives. Each of these logical drives has been
  smaller the real physical disk, had smaller clusters, and
  so less waste. If, for example, she was able to keep all the partitions
  less than 512 MB, cluster size was only 8 KB, and the loss was reduced to a
  a quarter of what it would be otherwise.

  People partitioned for other reasons also, but back in the days of
  FAT16, it was the main reason to do so.

  The present

  Three things have changed radically since 1996:

  1. the FAT32 and NTFS file systems came along, allowing a larger
  partitions with smaller clusters and so much less waste. In
  with NTFS, cluster sizes are 4 K, regardless of the size of the partition.

  2 hard drives have become much larger, often more than 1 TB (1000 GB) in
  size.

  3 hard drives have become much cheaper. For example, a 500 GB drive
  can be bought today for about $50. That s 250 times the size of this
  Player 2Gb typical 1996, about one-eighth of the price.

  What these things mean together which is the reason to be old to have
  multiple partitions to avoid the considerable wastage of disk space left.
  The amount of waste is much less than it used to be and the cost of
  that waste is much less. For all practical purposes, almost nobody does
  should no longer be concerned about slack, and it should no longer be
  has examined when planning your partition structure.

  What Partitions are used for today

  There are a variety of different ways people put in place several
  scores of these days. Some of these uses are reasonable, some are
  debatable, some are downright bad. I'll discuss a number of Commons
  partition types in the following:

  1. a partition for Windows only

  Most of the people who create such a partition are because they believe
  If they never have to reinstall Windows properly, at least they
  He won t lose their data and he won t have to reinstall their applications.
  because both are safe on other partitions.

  The first of these thoughts is a false comfort and the second
  is downright bad. See the analysis of the types of partition 2 and 4
  below to find out why.

  Also note that over the years, a lot of people who find their windows
  partition that has begun to be the right size proves to be too
  small. For example, if you have such a partition for Windows and later
  upgrade to a newer version of Windows, you may find that your Windows
  partition is too small.

  2. a partition for installed programs

  This normally goes hand in hand with the partition type 1, a partition for
  just Windows. The thought that if you reinstall Windows, your
  installed application programs are safe if they are in another
  partitions is simply not true. That s because all programs installed
  (with the exception of an occasional trivial) have pointers to the inside
  Windows, in the registry and elsewhere, as well as associated files
  buried in the Windows folder. So if Windows, pointers and
  the files go with it. Given that the programs need to be reinstalled if Windows
  the fact, this reasoning to a separate partition for programs not
  work. In fact, there is almost never a good reason to separate
  Windows of the software application into separate partitions.

  3. a partition for the pagefile.

  Some people think mistakenly that the pagefile on another
  score will improve performance. It is also false; It doesn t
  help and often I hurt, performance, because it increases the movement of the head
  to get back to the page to another file frequently used
  data on the disk. For best performance, the paging file should normally
  be on the most widely used score of less used physical player. For
  almost everyone with a single physical disk than the same drive s
  Windows is on C:.

  4. a partition for backup for other partitions.

  Some people make a separate partition to store backups of their other
  or partitions. People who rely on a "backup" are a joke
  themselves. It is only very slightly better than no backup at all.
  because it leaves you likely to be simultaneously the original losses
  and backup for many of the most common dangers: the head crashes and other
  types of drive, serious glitches to power failure, near lightning
  strikes, virus attack, even stolen computer.  In my opinion,.
  secure backup must be on a media removable and not stored in the
  computer.

  5. a partition for data files

  Above, when I discussed separate Windows on a clean partition,
  I pointed out that separate data from Windows is a false comfort if
  He of done with the idea that data will be safe if Windows ever
  must be reinstalled. I call it a false comfort that's because
  I'm afraid many people will rely on this separation, think that their
  data are safe there and so do not take measures to
  Back it up. In truth the data is not safe there. Having to reinstall
  Windows is just one of the dangers to someone a s hard disk and not
  probably even one. This kind of "backup" falls into the same
  category, as a backup to other partitions partition; It lets you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers that affect the entire physical disk, not
  just the particular partition. Security comes from a solid backup
  diet, not how partition you.

  However, for some people, it may be a good idea to separate Windows and
  programs on the one hand of the data on the other, putting each of the
  two types into separate partitions. I think that most people
  partitioning scheme must be based on their backup system and backup
  plans are generally of two types: whole hard disk imaging
  or data only backup. If you back up data, backup is
  usually facilitated by the presence of a separate with data only partition;
  to save just the score easily, without having to
  collect pieces from here and elsewhere. However, for
  those who backup by creating an image of the entire disk, there is
  usually little, if any, benefit the separation of data in a partition of
  its own.

  Furthermore, in all honesty, I must point out that there are many
  very respected people who recommend a separate partition for Windows,
  Whatever your backup plan.  Their arguments haven t convinced
  me, but there are clearly two views different here.

  6. a partition to image files

  Some people like to deal with the images and videos as something separate
  other data files and create a separate partition for them. To my
  the spirit, an image is simply another type of data and there is no
  the advantage in doing so.

  7. a partition for music files.

  The comments above related to the image files also apply to music
  files. They are just another type of data and must be dealt with the
  just like the other data.

  8. a partition for a second operating system to dual-boot to.

  For those who manage several operating systems (Windows Vista, Windows
  XP, Windows 98, Linux, etc.), a separate partition for each operating
  system is essential. The problems here are beyond the scope of this
  discussion, but simply to note that I have no objection to s
  all these partitions

  Performance

  Some people have several partitions because they believe that it
  somehow improves performance. That s not correct. The effect is
  probably low on modern computers with modern hard disks, but if
  whatever it is, the opposite is true: more music mean poorer
  performance. That's because normally no partition is full and it
  so are gaps between them. It takes time for the drive s
  read/write heads to cross these gaps. Close all files
  are, faster access to them will be.

  Organization

  I think a lot of people overpartition because they use scores as a
  organizational structure. They have a keen sense of order and you want to
  to separate the apples from the oranges on their readers.

  Yes, separating the different types of files on partitions is a
  technical organization, but then is to separate different types of
  files in folders. The difference is that the walls are static and
  fixed in size, while the files are dynamic, changing size automatically
  as needed to meet your changing needs. This usually done records
  a much better way to organize, in my opinion.

  Certainly, partitions can be resized when necessary, but except with the latter
  versions of Windows, which requires a third-party software (the and the
  possibility to do so in Windows is primitive compared to the third-party
  solutions). These third party software normally costs money and not
  any point and how stable it is, affects the entire disk.
  with the risk of losing everything. Plan your partitions in
  first place and repartitioning, none will be necessary.  The need
  to repartition usually occurs as a result of overpartitioning in
  the first place.

  What often happens when people organize with partitions instead
  records are that they make a miscalculation of how much room they need on each
  This partition, and then when they run out of space on the partition
  When a file is logically, while having plenty of space
  on the other hand, they simply saving the file in the score of "poor".
  Paradoxically, therefore, results in this kind of score structure
  less organization rather than more.

  So how should I partition my drive

  If you read what came before, my findings will not come as a
  surprise:

  1. If your backup set is the image of the entire disk, have just one
  single (usually c partition :));

  2. If you backups just data, have two partitions one for Windows and
  application programs installed (usually c :)), the other for data
  (normally D :).)

  With the exception of multiple operating systems, it is rarely
  any advantage to have more than two partitions.

• DAL performance analysis

  Hello

  I am in need to analyze and optimize the existing functions of Documaker 11.3 DAL. So, I'm looking for a way to find the time taken by each DAL scripts. Is there a way to analyze and connect DAL execution?

  I saw 'ANALYSIS of the PERFORMANCE of DAL' topic on administrator's Guide. But not sure with, where to start?... What are the steps to connect to runtime of DALs on trace file? Please help me on this. Thanks in advance!

  I think we will find the information you need in the reference of DAL.

  There is a < debug_switches=""> group INI, which contains the following INI settings:

  

  To enable debug information, you also need to add the following INI setting:

  < debug_switches="">

  ENABLE_DEBUG_OPTIONS = YES

• BI Publisher settings when using the OBIEE analysis as the data set

  Hello world
  
  I've created a BEEP report with an existing OBIEE analysis as all data in the data model. I'm stuck with parameters.
  
  In modeling data for BEEP Guide, section 2.8.1 the following text is displayed: "settings and the list of values are inherited from the analysis of BI and they display running." BI analysis must have default values defined for the filter variables. »

  
  

  When he says of parameters and LOV is inherited from the analysis of BI, what is he referring to OBIEE analysis? And when he says "'filter variables" what is it referring to the analysis of OBIEE? " What should I do on the side of the OBIEE analysis, to activate the settings side BEEP report...?

  
  

  Thank you
  

  I managed to get this working. The documentation is very vague. The BEEP report gets the parameters 'default' and LOV based on the presentation and the column variable in OBIEE analysis he uses as a data set. You can't see these variables as parameters on the BEEP report presentation.

  If you need to use variables of presentation on OBIEE analysis, with a default value. Then create the report BEEP with this analysis, as the set of data. Don't create settings on the side TONE. The BEEP report on a dashboard and there you go, the BEEP report data will be filtered according to the value of the variable of presentation.