The second sim card data

Similar Questions

• Can I take the nano sim card in my iPhone and use it in my iPad

  Can I use the nano sim card in my iPhone in my mini iPad?

  As long as your account has data on it. Will not, however, be able to make phone calls with him.

• BlackBerry Z10 getting the error "SIM card is not compatible.

  Hi, I use data perfectly on my z10, until yesterday, he stopped working and get the message 'SIM card is not compatible. Everything works perfectly, I can call, send text and even use wifi. Also, my phone is unlock. Any help would be appreciated.

   

  It is because of problem of transfer of data in general, not made mulfunction Z10 or SIM himself. Most of the time he linked with your data plan with carrier is off or never was on.

  So first step that you need is to contact you, technicians of carrier to verify you have a problem you data plan account or not.

• How to complete the implementation of process after inserting the new sim card to unlock the phone

  Try to unlock the phone more 6s with ATT, but do not know how to perform the implementation of process after inserting the new sim card. I got the unlock code confirmed att.

  After the unlock code is confirmed, you will have to restore the unit to the factory via iTunes settings.  He must inform you that the device is unlocked, THEN you change sim cards.

• What is the free sim card

  WHT is the free sim card

  I suspect you are asking on a sim-free phone. It's a phone that comes without a SIM and is not locked to a specific carrier. More information:

  http://www.Apple.com/shop/iPhone/about-unlocked

  http://9to5Mac.com/2015/10/08/SIM-free-unlocked-iPhone-6s/

• Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

  Device: BlackBerry Z10
  Model: STL100-1
  Software version: 10.2.1.537
  OS version: 10.2.1.1925
  Carrier: Beeline (KZ)

  Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

  Tried to activate or disable this setting, the result:

  On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

  Off - 1 min 17 sec

  What is the problem of the time difference?

  Good, thanks

• BlackBerry Bold 9900 smartphones will not recognize the new SIM card

  I recently got a Bold 9900 as a gift. In my view, that the phone has been used on the Orange network.

  I tried replacing the original Orange SIM card with my SIMcard "pay-as-you-go" three, when I turn on the phone I get the message "SIM not recognized" and a dialog box asking me to enter a code to unlock the SIM card.

  Because this means that the phone is locked on Orange network. If so, how can I get the unlock code for the new SIM card?

  Best regards

  SS

  Hello and welcome to the community!

  You have in fact potentially two issues to deal with... When BBs are made, they are "locked" to their original media and cannot be used on any other carrier up to this MEP is unlocked. Reference:

  • http://supportforums.BlackBerry.com/T5/General-BlackBerry-functions-and/unlocking-your-BlackBerry-gu...

  But the error you say does not quite what I'd expect from an MEP lock... but please check after the above and see if your BB is indeed MEP locked... If so, then Yes you need to unlock it until you can use it on any other carrier.

  Or - some SIM cards are delivered with a code of their own necessary to unlock and use. But the supplier of the SIM card which should also give unlock code you with this (if that's what applies to your situation).

  So, I suggest you check to see if your device is still locked MEP... If so, get a code (you may have to pay) and unlock it. Then try the SIM card again. If it still fails then your SIM card provider.

  In addition, please check with your mobile service provider preferred 100% certain that your BB model is 100% compatible with their network for all services.

  Good luck!

• Help blackBerry Smartphones! Bold 9700 is frozen on start up with the new sim card

  I tried looking for similar topics but could not find more relevant. everyone seems to have no problem with swapping of cards sim on their fat. If there is a thread already open, I'm sorry. I am really frustrated and really need my blackberry to be operational.

  I have a Bold 9700, updated to the latest OS, everything works fine. I recently had some problems with my old sim card so I went to my service provider to change to another (same number, same line, same contract, just a new sim card).

  As it is expected that I was told that when my old sim is disabled, simply insert my new and I use my phone as normal.

  However, when I did this, the phone was stuck at the loading screen (the bar is all white) for eternity (maybe 5 minutes or more) before moving on to the home screen. There is no charge "security check" bar, the phone is completely frozen, no buttons work, the touch pad does not work, it shows 3G top right without the sign of blackberry, there is no service provider name and from time to time the little loading logo clock is displayed.

  I pulled the battery a couple of times and the problem persists. I called the service provider to reactivate the new sim card, they did 3 times, same problem. I inserted the SIM in other non-blackberry phones that I have and it works on all phones. When I put my old sim card in the 9700 disabled, the phone start end in 2-3 minutes, 'check' safety bar according to normal, everything moves, just no connection to the service. When I turn on the phone without sim card it starts fine with a message to say out loud the card sim.

  I even went down to the assistance service technique blackberry from my service provider and they were no help. all they could say was 'we must wipe your phone and reload the software' that I'm trying to avoid, and I can do it myself anyway.

  My phone is unlocked, comes unlocked here in Singapore, I even checked using the method 'MEPD', all disabled.

  This was very frustrating, especially when I need my blackberry for work. What is the problem with my phone? How can the simple replacement of a sim card if difficult on a blackberry when there is problem free for ANY other phone I've ever used? I am now fear when I travel abroad for business and requires a foreign sim card.

  had the same problem and eventually happeing is that I had to reload my os permeable, and then insert the sim card and upgrade again.

  consusming time, but worth it

• Problem with the second red card

  Hola, the sober consultar queria a problem that I am having in el con host the second red card.

  Tengo UN esxi 5 desde hace one wont by Dias y estoy beginning an armar una pequeña infrastructure virtual, en el host estoy necesitando una segunda tarjeta red are only in el mismo voy a put a device that makes a kind of proxy, por lo Québec Necesito tener tarjetas UN 2 red, pero el just greet me detecta to edge.

  Don't probe change the tarjeta por otras pero no reconoce la, son todas tarjetas genericas estan bullfighting in the list of compatibility than por eso por no haber problemas should.

  He buscado in documentation pero las cosas as he found me None ha sido of utility.

  The found a worm if me can perform o algo a prueba alguna indicate that me can help con el problema.

  MUCHAS gracias!

  Hola Matias,

  If going to a network adapters appears todas las NIC?

  A greeting.

  Sent from my iPhone

• Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

  Hi there - first post here, so please be nice :-).

  We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

  I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

  Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

  Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

  If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

  Concerning

  EFIN.

  Do you get the same error when you try to add the network adapter by using the command line?

  1. esxcfg-vSwitch - L vmnic1 vSwitch0

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Add the second NETWORK card to vSwitch

  I'm working on trying to add to install a second NIC physical to the vswitch which is installed by default when ESXi. I use the code below, but when I run it, it disconnects in fact the main physical network card and of course, I then lose connection. I tried different varients of this and even finished by adding a port of vmk, which I didn't do. I just want to add the second network card as a standby card network.

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1
  

  The cmdlet Set-VirtualSwitch accepts a string array as the value of the parameter - Nic. So you should be able to:

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1,vmnic2
  

  Best regards, Robert

• Given to replace my current iphone with a 6s - a trip that I can disable the use of boxes and use a unique sim card data for emails

  Given to replace my iphone today with a 6s - a trip that I can disable the use of boxes and use a sim card only data for email & web.

  If you go to settings > Mobile and less ' use of mobile data for: "turn off all except Safari and Mail

• BlackBerry Smartphones second hand blackberry 9900 rejects the new sim card?

  Hello everyone. I intend to sell my Blackberry Bold 9900. However, I fear that the user cannot use a new sim card, like when I tried to place a new phone rejected it, he says "SIM not configured". How can I possibly fix?

  I bought my phone as a single unit on an online store, which means that it has never been on a postpaid.

  Thank you!

  You need to get the device unlocked from a reputable unlocking service. I recommend unlock.berryreview.com

• use mobile hotspot or obtain a sim card data prepaid for iPad

  I have an iPhone 6 more and just paid for an iPad pro and it's my first iPad. I don't know if I can use hotspot on my mobile phone to surf the net on my iPad or to obtain a card sim data prepaid?  Thank you

  First of all, you would be able to create a hotspot from the phone that is supported by your operator. If it is supported, then you would be able to configure it to connect your iPad to. Insofar as you are using a SIM of data prepaid for the iPad, which could be made only if the iPad is a mobile Wi - Fi device. Many are the only Wi - Fi devices and cell phones are not supported. You need to know what type of device you have purchased.

• Questions of bbid to blackBerry Smartphones. I have the new SIM card, I have reset my password BBID

  Hello, I just changed my SIM card and I'm unable to access my phone (curve 9720) apparently my password / ID was incorrect. I have consulted my BB account via my PC and put (via recovery) to change my BBID password successfully. Yet when I try the new password to my BB gives me just the same message "the user name and password provided do not corrospond to a vlid BBID.

  PLEASE HELP ME

  

  Make a backup of your device using the desktop software, see this: How to back up and restore data from smartphone BlackBerry using BlackBerry Desktop Software

  Then do a wipe secuiry on your device. See: How to delete all data and applications from the smart phone BlackBerry with the optio security wipe...

  Restore your data using BlackBerry Desktop Software. Then again, log in using your new BlackBerry ID credentials. Good luck!

  PS The 9720 isn't a curve or a "BOLD" is just called BlackBerry® 9720