The secondary SATA drives fail after two weeks

Similar Questions

• Problems after installing the second SATA drive in Windows 7

  I just install a second SATA hard drive in Windows 7. Currently, I use only a processor AMD Athlon X 2 4800 with 3 GB of RAM, Windows 7 64 - bit, installed on a 400 GB Samsung SATA drive and have two (a pioneer and a Liteon) DVD burners.

  System worked fine until I put in the new drive. Previously, I had hung as such discs: SATA1 was the existing 400Go drive, SATA2 and 3 were two DVD burners (don't ask me why, I have 2, will remove one of them, if that's the problem).

  Installed the new HARD in the SATA4 drive. Booted up, saw the new drive in the BIOS, but Windows does not see it until I went to disk management, a drive letter assigned and formatted etc. Also, I swapped the drive letters so I had all of the HARD drive (I have my 400 GB split into two readers via the partition) and C: D: E: F: and G:, DVD players.

  Started, began to transfer data from D: to the new E:, and Windows crashes. No message error, everything freezes. Need to reset, and then allow Windows to check for errors etc. Return to Windows, same case again. I swapped the SATA cables so that SATA1 and 2 are the HARD drives and SATA3 and 4 are DVD players. Reboot, same case.

  What I am doing wrong? Or what should I do? I don't even have to start the transfer of data I just let WIndows running for 2 minutes and it automatically hangs again.

  If someone could help me as soon as POSSIBLE please, it would be fantastic. Thank you!

  I've been in contact with the provider, and Yes, that will take it back for Exchange. They gave me some ideas to try first, I'm going to do tonight; They asked me to check if the HARD disk is running on series complete ATA (SATA) mode and to enable the DMA if he asks me to. Otherwise, they said, try the fail-safe mode. Don't know if any of them are currently enabled etc but will find tonight.

  All else fails, I take that back! Simply means a 3 hours trip to Melbourne to make...

  Thanks again guys for your help.

  Michael.

• Windows 7 loses the secondary hard drive

  This has been a problem, I don't know why I waited this long to ask about it.

  My secondary hard drive keep endangered of Windows 7, as if someone unplugged spontaneously, except that it's still there.

  This problem can be resolved by restarting just the computer, and it can remain correct for a few minutes, a few hoursor a few days, but it still exists, usually several times a week.

  I checked all connections and even swapped the cables. There is nothing wrong with the drive itself, I can put it in another computer without this problem occurring. I also tried to move to an another empty SATA connection on the motherboard without success.

  I do not use the drive on a regular basis and bought only so that the steam and the game files that are, (and now the original since I finally broke down and got Mass Effect 3 despite efforts to avoid EA "me too!" steam clone.) were not cluttering up my main hard drive.

  But when I decide to take a load off and play games, I like for the reader to be there without needing a reboot, it can so be a little frustrating because it's usually when I am stressed already :)

  Thanks in advance for any help offered.

  Notes:

  PC is a version custom;

  HARD disk: 300 GB wd velociraptor (Primary)

  HARD drive: 600 GB wd velociraptor (Secondary)

  PSU: 1200w

  MOBO: EVGA classified (not sure about the top of my head that one in the series)

  CPU: intel core i7 950

  GPU: nvidia geforce gtx 680 (EVGA)

  MEM: 6 GB DDR3

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Disks RAID configured hard two?

  Internal hard disks connect to the motherboard of your computer using an IDE or SATA interface interface. Most new hard drives come with an IDE or SATA connection cable, depending on the type of drive.

  Install an internal hard disk takes a bit more work, especially if you plan to make the new disk your primary hard disk where you install Windows. Drive hard internal jumpers that you set to configure the main hard drive (master) disk where you install Windows or a secondary (slave) drive where you store programs and files. For the diagnosis of your problem, I suggest trying the following methods and check if the number is reproduced.

  Method 1:

  Check if you are able to view the second hard disk (HDD) in Device Manager. If so, try to change drive letter assignments in Windows 7. See the following steps:

  (a) connect to the computer as an administrator.

  (b) click Start, right-click computerand then click Manage.

  (c) click on disk management.

  (d) right click on the volume of the secondary HDD that you want to change and then click change drive letter and paths.

  (e) double click on the secondary drive, click change, click the drive letter that you want to use and then click OK.

  Additional information:
  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  If method 1 does not resolve the problem, go to method 2.

  Method 2:

  I suggest you try to check the secondary hard drive to find errors.

  Consult the following link:

  Check your hard drive to find errors in Windows 7

  http://support.Microsoft.com/kb/2641432/en-us

  Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  If method 2 does not work, go to method 3.

  Method 3:

  Try to run a scan of the file system (CFS) auditor to check any file corruption:

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively click on Yes.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  My drive hard mac failed and I got a new drive to come. I save the news a few weeks before the accident with time machine.

  Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  Hello

  Transfer of the installed application would not work properly.

  I advise you to install the application again.

  Kind regards

  Sheena

• Add the secondary hard drive to dv7-3130eo

  Anyone know if it is possible to use the secondary hard drive Bay on the above model.

  I searched and could not know whether or not it is supported. If it supports this what should I use to add an sdd drive

  Yes, it can be used. You just need the hard drive caddy and the connector like the one that is in the hard drive Bay. They are available online or on eBay for maybe $45.

  example of

  Yes, the hard drive can be an ssd. SSD drives have the same physical dimensions and connections such as a SATA drive. You need the money because I just don't see prices of SSDS come down to where I think it makes sense to invest in one. I ran an ssd in my last laptop... paid about $400 for a concert 128 2 years ago and I don't think they are much cheaper now, although they are better I guess. It was all that (fast, quiet, cool), but it was nagging little glitches on writing on the disc and occasionally she just sat there for a few seconds and think about doing something. I changed a standard 7200 RPM drive.

• The features in payroll compensation every two weeks race

  Hello evry1.

  I would like to know how the compensation process works in a payroll system every two weeks.

  Please also indicate what are the different options for running a compensation to a payroll every two weeks.

  I recently received an assignment and I'm supposed to demonstrate this feature.

  Compensation

  Compensation per item

  Increased compensation

  Please let me know which one to use of the foregoing for our payroll every two weeks.

  all your answers are welcome

  Jenny

  I'm afraid that the screenshots have been deleted.

  See also the note-

  Oracle Payroll improved compensation - a functional white book (Doc ID 1484339.1)

• Install the new SATA drive and the primary drive Clone which he

  After reading many messages from hard drive yesterday and the manual for my Dimension 4600, I bought a Western Digital 250 GB SATA internal drive which will become the secondary drive through Dell. My first is a 40 GB with 14 GB of free space. I am a student of site design Web and must use Adobe Creative Suite CS3, including PhotoShop, Dreamweaver, etc., which is a huge program. Technology Department told me that I could load the program Adobe Creative Suite CS3 on the new secondary drive and my images and other Documents which I will use to create Web sites for school. I could load MicroSoft Office 2007 as well if it is a good idea.

  What is a reasonable secondary use of a hard drive?  Is this a good practice? Benefits; Disadvantages?

  If the primary drive fails in the future, it is possible to just load Windows XP, etc on the new secondary disk at this time and the report on? Or I need to remove Adobe Creative Suite, MicroSoft Office, my pictures, etc., before I could load the operating system? I have a 60 GB external USB drive for backup of Documents and Settings.

  Dell Dimension 4600 (Pentium 4 CPU 2 .8GHz, memory 3 GB RAM) running MS Windows Home XP, SP 3.

  Any other good suggestions for the use of a Seconday drive in my case?

  Message edited by Tennis_8 on 05/21/2008 09:53
  
  

• HP Envy I7 15 "Notebook PC - last updated Intel for the HD graphics driver fails to install

  My PC has tried to install the driver update today, and two attempts failed after installation. There is no diagnostic messages, only the X on the last stage to indicate a failure. The HP support assistant continues to show the driver needing an update. Any ideas how to fix the driver update problem? Thank you in advance.

  Credentials of PC: Windows 8.1, product number C8P48AV

  What is trying to update: SoftPaq SP630750, Version 10.18.10.3304

  Hi Vdolcourt,

  Yes, I would recommend to do this. But make sure that you uninstall the driver first. Here is the download at HP.

  I hope this helps.

  Thank you.

• CD/DVD on Satellite U500 drive failed after installing Windows 10

  My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.

  I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
  I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.

  I'm about to give up the laptop but am wondering if anyone can help me?

  I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!

  U500 is old piece of hardware and not supported for Win10, right?

  In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?

• Hard Drive failed after replacement

  My computer recently went for a drive hard repalcement of HP Support because it is still under warranty. After that their return receipt I'm gone and ran the same test that tells the hard drive failed the last time and received a fault code of

  GGANWC-67H6K8-XD7X1F-60SF03

  It looks like the last. Is this a Bios problem causing the hard drive give errors or is it another failed hard drive?

  Hello TheProfitible,

  You just had the HARD drive replaced and now you've found a similar mistake that he does not have.

  The code checks that the HARD drive has failed.

  You should call HP and have them replace the disc again and check the motherboard. It could be a problem with the motherboard failure.

  Sorry to hear it happened.

  Here is the link for the phone number for HP.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• Satego X 200 - 21U - where to find the XP SATA driver for install XP

  I have laptop Satego X 200 - 21U with installed Windows Vista.
  Where can I find the driver for SATA drive so I could install Windows XP?
  HARD drive is Hitachi hts 541616j9sa00.

  Hello

  The SATA driver is part of the Intel Storage Manager.
  You can download the Storage Manager Intel since the European driver Toshiba page.

  The package contains the F6hlpy folder that contains the files needed for the SATA.

  These files must be included for the Windows XP CD using free software called nLite.

  Google for nLite to get and find more details.

  Good bye

• HP Envy 17, Win 7 64 bit - how to re - install windows when the old hard drive failed?

  The laptop won't boot and drive fails Diagnostics to market. Restore does not work and take the hard drive on the laptop & connection on my desktop I can not access the recovery partition. The laptop is out of warranty.

  I have a replacement drive, but as I have no install disc and cannot access the recovery partition how can I reinstall the Windows OEM 7 new hard disk?

  Any help would be appreciated.

  If the full 25-character windows activation key is visible on the Microsoft Windows COA on your laptop, you can download an identical iso file from here and install Windows.

  Download the drivers from the HP support for your laptop computer portal. Put them on a flashdisk usb (USB key) for ease of installation.

  Use the Microsoft Windows 7 USD\DVD download tool and a 4 GB usb (thumbdrive) flashdisk for the fastest and most reliable Windows installation medium.

  The value in this way you can have your laptop in a usable state while you wait for your ordered recovery disk.

  Best regards
  ERICO

• Cannot print multiple copies from Excel. Also impossible to update HP driver. The update of the Microsoft HP driver fails to install.

  Windows 7 + Office 2007 with HP 1200 LaserJet printer: unable to print multiple copies of Excel documents.  Also impossible to install the update from the HP Microsoft driver.  Windows Update indicates the updated driver available... but fails to install.  Everything was stable and works very well.  All other printing works very well (including multiple copies from other programs like Adobe etc).

  Any help will be appreciated.

  Hi Rolloutman,

  ·        What happens when you try to perform multiple copies of Word?

  1. to narrow down on the issue, I suggest you to print several copies of a Word document or notepad.

  2. provide the error message or error code for the problem to install the updated driver, follow these steps:

  i. Click Start, in the search box, type in update

  II. click on windows Update

  III. click view update history

  IV. double-click Update failed

  3. update the printer driver to manually. Steps to update the driver:

  i. click on start, type devmgmt.msc and then on enter.

  II. develop the printer and right click on the sub element and click on update driver.

  Link for reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also check out the link below:http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29790&locale=en_US&taskId=135&prodSeriesId=29789&prodTypeId=18972

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Allocate storage to a temporary file on the secondary hard drive?  (CS5)

  Is it possible to allocate a file temp on a secondary hard drive storage?

  I have created a few videos and am really low on disk space C;  Is there a parameter such as the space consumed by ongoing projects can be used by my secondary hard drive?

  I first pro installed on the C drive, but want the consumption of data occurs on the D drive.

  Version CS5.5

  Any help is very appreciated.

  Scroll down the guidelines for the use of the disc:

  Disk configuration:

• S10 HDD died, pick up the new HARD drive failed?

  The HHD on my S10 is dead.  I buy a new one and installed.  I when to run the recovery disc I made when I first came to the computer, but they get only part of the way that the restoration.  I bet I have a bad set of recovery disks.  Is there a way to get a clean copy of these?

  Thank you

  Edit: Mod comment sorry about your inconvenience it's my fault... clear .more postname%/ is important

  Rename Postname of SIS Hard Drive Dead Ito S10 HDD Dead, pick up the new HARD drive has failed?

  cordially KalvinKlein

  w5adc,

  Sorry to hear about your problems.  I would check and see what we have in the way of records of recovery - given a bit of time, we could probably burn an entire system in the laboratory and send you.

  Please send me a PM with your details and allow me a few days on this.

  Mark