The strong points of attachment

Similar Questions

• Tecra S1: Move the mouse pointer

  From time to time my mouse pointer moves slowly upward or sideways. This happens once anchored and when not docked. In the latter case, I have an external mouse not attached.

  This problem is really annoying, especially when you try to hit a box for example.

  Any ideas?

  See you soon

  seasack

  Hi seasack

  If you use the pointer internal (the stick between GH and B), it is very common that the ca of pointer starts to move.
  The reason is a bit technical but very understandable.
  The mouse pointer works like a small joystick. Means that it is that you push forward, down, sideways and so on. However, please check the HOUSE or 0-position from time to time. When you're not, this would be a normal position of the HOUSE for us but it doesn't.
  It is therefore possible that it may be wrong to believe that the position of the HOUSE is when you push forward.
  If you stand and do not change the position of the needle for (I think) 2 separate controls the position of the HOUSE, this position will then be the new post HOME until the next time he finds another.
  Actual cases is not that extreme, of course, but more normal cases are that you bend your finger on the pointer when for example reading something on the screen. The pointer can recognize as a small boost, and if you do go, then he could have a new position of the HOUSE and start to drift or it could be "heavy" feeling in a certain direction.
  The solution? Simple! Leave it on for about 5 seconds and it will go away.

  If you have this problem, even if your not even using the pointer, then I guess you have a hardware problem.
  Try disabling the internal mouse by pressing FN + F9.

  Good luck

  Tom

• In the example LabVIEW Full featured, which makes the entry point button reappear?

  My question is this: what piece of LV code or invoke the node for the TS engine makes the entry Point button reappear when loading a file of sequence?

  Background:

  I inherited a modified version of Full Featured LabVIEW UI, which has been moderately modified (enough so this restart is not really an option, but it is still quite similar to use as comparisons for behaviors).  In addition, this code was started in LV2012/TS2012 and I'm migrating to LV2013/TS2013, but this behavior is consistent in both versions.

  Here is what I tried:
  I have found that when the command connect runs (see attachment), the button which is a TSUI. IButton control, SEAO is grayed out or hidden.  In the unmodified example user interface provided with TestStand, button is again displayed when loading a file of sequence.  The problem is that when I load a movie file in my code and click it before the race, the button does not reappear. In my code, I can run the sequence successfully by right click on the movie file and selecting run, so I don't think the sequence has an error, or the process model.

  Thanks in advance,

  Seth

  Seth,

  The entry 'options' of the ConnectCommand function controls this. On help page for this entry, you can see that there are options for "ignore enable" and "ignore visible." Or any of them may affect the functionality of the key entry point. You could try to make the options for both keys 0 and see if that fixes the problem. If this isn't the case, please let us know.

• Does the red dot in the affect of VI attached speed or not?

  My VI has a large number of controls. If a control is defined as typedel, when the typedef connects to other controls, it shows the red dot. How can I get rid of the red dot? Does the red dot in the affect of VI attached speed or not?

  Thank you

  John wrote:

  How can I get rid of the red dot?

  Make controls/indicators that you have connected it to also type FED.

  Coercion causes slight slowdowns since there is a conversion involved.  Only in the tighter curls would be you pointed out.

• How to change the plot point of the graph XY color programmatically fill?

  Hello everyone,

  I want to make a graph for my project. This graph in x axis date and there is the value. I made this graph XY.

  Now I want two conditions

  One is to draw the average value of the total value. Then traced the fill point color will change according to the average value. For example, my data values between 286 to 295 (any value present in the meantime) my average value is 290,6. So over 290,6 fills point color is GREEN and below the average value is RED. It is in fact I want. I did draw my data and also the average value. But I tried to change color, I couldn't. So please answer me someone. How can I do this task?

  Thanks in advance

  Joel M

  India

  I've attached real output and the power required

  All points of a field must have the same color.  What you can do is create a 3rd no line and red dots.  You can create a trace that contains all of the 'bad' XY pairs and intrigues.  Make sure that your parcel number is such that the red dots to draw on top of the green dots

• Which is the correct Point on the waveform of the Signal?

  Hello

  Please see attached image.

  I have labview software which is to measure the load of a load cell output. According to me, that the reading is accurate, except with the software Labview, we get up to 50 lbs less when we read it with the oscilloscope technician.

  What I see is that the technician measure the amplitude of the signal at the top and when there is little noise reading of the oscilloscope is even higher because the placement of the cursor is higher.

  I see that LabView is more or less because when we place the cursor oscilloscope in the middle of the measurement at the center of the signal signal not top it it reads then the same my labview program. I also have a low bypass filter in labview software.

  Which are the correct measure points waiting for oscilloscope to measure? in the picture as an attachment the white slider is positioned correctly, or is the correct red cursor?

  It's just an example of image zoom to see better.

  Thanks to you all.

  JCollado

  If I understand you correctly the width of the track to noculars represents 50 lbs of difference as? If you think about how works a noculars, then the center of the line displayed is probably the most accurate. The line width is determined by a few things, noise superimposed on the signal being a. So, with a noise filtering in your LabVIEW its 'width of the line"program will be closer / diluent, as it will have removed some of the noise component. Place the cursor in the middle of the path displayed in the noculars is an approximation of this, sort of looking for the point where the noise is "average" out 1/2 top / in-1/2 under the cursor, which is about the signal of 'data '. It is difficult to make measurements of accuracy of a noisy signal with a noculars for this reason, where do you put the trace? If you were to remove the filter program LP you would probably get the equivalent of the "wide trace flag" which would be a series of values that plotted close the underlying signal, but with high and low variations equivalent to the width of the track.

  So after all this verbiage, I would read the trace Center, perform an average of noise 'eyeball '.

• move the data points on the waveform display

  Hello

  No idea why the waveform display to my VI has shift the data points? The third tab of the screen does not display this problem. I took a video of what happens to better illustrate what I'm talking about and attached my VI to identify the problem.

  I am currently a sample of data from a DAQmx and storing in a queue until data backup button. Everything works well, but the problem is the display of actual data, which, although sense points, it shows move in a small area around where they are drawn in the first place. It happens even when I erase the visible data and restart the collection of data, as shown in the video.

  Thanks for any help you may be able to provide.

  Guy

  The amount of data you draw? If you draw a lot more datapoints that there are pixels on the x-axis of the graph, you can get peaks that appear to move because of graphic interpolation LabVIEW has to do.

  Mike...

• direct access to the modem point

  is it possible to directly use the access point with a modem.  my router seems to slow down my internet connection.  If I connect directly access point, I can still access the internet with my laptop, but my xbox comes up with an error "no IP".  any advice?

  Yes and NO

  An access point is designed to be a network of signal and therefor if the WAP54G was connected to your moen he will be part of the public network like all clients attached to it. This means that all customers should also public IP provided by your ISP.

  Your ISP probably would not be in favor of offering more than 1 IP because there is a finite number of available IPv4 IP and there is a growing shortage of IPv4 IP addresses. This is the reason why IPv6 is developed.

  Concerning

  Fred

• Validation on the page point is lost when creating dynamic action button

  
  Nice day

  I have some page elements like empno, job etc in my application to learn the goal where I validations

  to check the length of the point/numeric field and check for null

  I have 4 buttons [create, delete, cancel, apply changes] do dml basic operation

  Initially, all validations were shot when there was not any trigger attached to the buttons

  Once a dynamic action was created for a button by button create account to make these features as the insertion in arrays that are passed as a packaged procedure

  It works in all cases (for example) even if an entry is garbage does is allow inserts into the table and all the controls as EMPNO, JOBNO validations are ignored

  How can we ensure that these validations must be taken into account first and fired before and only if it is a valid entry before you create key

  otherwise it should always display error message when you enter invalid

  Tried to use the point of application by the shared components, then set value of Validation for function returns the error text a different value for the same point of the application

  [Like global variable]

  Don't know if the method described above is correct but stuck in this

  Not too much competent in JavaScript and didn't want to try if there is any possibility

  Kindly help on this

  Thank you

  Why not use page instead of dynamic action processes, they fire after validations

  Gus

• How can I open the end point of a letter/police?

  Hi all

  I try to open the end point of a letter using Illustrator. The attached image shows what I'm trying to achieve. I did it by putting a white shape on top of it, but it will not work for a logo to be used on a coloured background, for example. What I need is to be able to open the end without having to add forms, or to be able to merge these forms to the letter, it becomes a path or shape (but I had no chance of being able to find a way to do it).

  I hope I made sense! I'm rather perplexed, so any help would be greatly appreciated.

  Thank you!

  

  Sukipop,

  Forms of letters assuming paths as usual vector illustrations (Type > vectorize or similar) with black outlines, you can:

  (1) select the paths of the letter and the object > path > Outline Stroke.

  (2) ShiftClickDrag with the line tool Segment each location where you want to cut paths/forms (horizontal lines), then object > path > divide objects below, then select the unwanted bits and press DELETE.

• JavaScript to embed the file as an attachment

  I found a Javascript script on the forum that allows me to have a user of the form to join a file a PDF form in Adobe Reader.  The script is below and works very well... until I consult the document saved on a computer.  I discovered that Adobe Reader Mobile doesn't recognize attachments added as annotations (only the embedded files).  Can someone help me to modify this script so that the file is truly integrated and not added as an annotation?  My follow-up question is the javascript to detach the file with a button.  I use Adobe Acrobat DC to set the shape.  Thank you very much for your help!

  The way in which it is programmed, it's that the button itself with an action of mouse upward, the following Javascript code is executed:

  If (app.viewerVersion < 11) {}

  import_pre_11();

  } else {}

  import_11();

  }

  Then, there's a document level javascript to attach the file that is scheduled as follows:

  Initialize the attachment number

  attachment_num = 1;

  Original location of file attachment icon

  The value of x is incremented below

  FOPI var = {x_init:-72, 72 - x:, y: - 72};  In the lower left corner of the page

  function import_pre_11() {}

  If (app.viewerType = 'Reader') {}

  App.Alert ({}

  CMSG: "you must user Reader version 11 or later to attach files to this form."

  CTitre: "attach file error"

  nIcon: 3,.

  nType: 0

  });

  return;

  }

  Invite the user to import a file

  App.Alert ({}

  CMSG: "click the OK button to select a file on your system.',

  CTitre: "attach a file",

  nIcon: 3,.

  nType: 0

  });

  try {}

  var rc = this.importDataObject ("Attachment" + attachment_num);

  If {(rc)

  attachment_num += 1;

  App.Alert ({}

  CMSG: "attachment successful.\r\rOpen Panel attachments to access attached files.",

  CTitre: "attachment Successful."

  nIcon: 3,.

  nType: 0

  });

  } else {}

  App.Alert ({}

  CMSG: "attachment canceled.",

  CTitre: 'attachment cancelled. "

  nIcon: 3,.

  nType: 0

  });

  }

  } catch (e) {}

  App.Alert ({}

  CMSG: 'could not attach file.',

  CTitre: 'could not attach the file.

  nIcon: 3,.

  nType: 0

  });

  }

  }

  function import_11() {}

  try {}

  var annot = addAnnot({)

  page: event.target.page;

  type: "FileAttachment,"

  Author: the form "user."

  name: "attachment".

  point: [oFAP.x, oFAP.y].

  content: "the folder entry on:" + util.printd ("yyyy/mm/dd hh: mm:", Date()) new, "."

  attachIcon: "Trombone".

  });

  annot.cAttachmentPath; Prompt the user to select a file to attach

  oFAP.x += 18;  Increment the x for the icon location

  } catch (e) {}

  App.Alert ({}

  CMSG: "could not reach file.\r\rPlease report this error."

  CTitre: 'file attachment error. "

  nIcon: 3,.

  nType: 0

  });

  }

  }

  I know, I wrote it. Player cannot add the embedded files, even manually, unless the file player compatible with the use of the right embedded file attachment.

• Refresh only the left side of the cascade point shuttle LOV

  Hello
  
  I want to fill the shuttle point dynamically using selection LOV cascading list. but when I change to another value left and right gets refreshed.
  
  but I want to refresh only the left side, right must be the same.
  
  I want to achieve something like that
  
  http://Apex.Oracle.com/pls/Apex/f?p=579:56
  
  I want to achieve this by using Refresh before and after updating dynamic action.
  Is this possible?
  
  pls help me with this. Its very urgent.

  879090 wrote:

  If you are on 4.x just used the cascade LOV Parent article (s) in the element of the shuttle

  Yes use v 4.X .and uses the parent LOV cascading item. My problem is that I want to change the elements of lov parent and cascading using different values.

  Let's say my lov elements parent has deptno 10,20,30.

  Wen I select dept 10 it should display all the emp to 10 dept. and I wil select some employees from that. then I will select dept 20 then it will show all employees of dept 20 and I will select a few PMCs from that.

  But now the prob is wen I don't change the dept No 20 of 10, the right side of the shuttle point with details emp dept 10 has disappeared. but I want that values must be ter, and should be updated by the left side.

  check out the link that I have attached in the first post. I want to achieve the same thing like that.

  Well, I looked at link above and even recreated in my demo application and added the section how it, just follow the steps

  http://Apex.Oracle.com/pls/Apex/f?p=46417:22

  Test/test connection

• How to set the starting point of a variable width profile anchor point?

  Hello

  I have a square with a dotted on her. I can't be a variable race, so I loaded 'Width profile 2' in the profiles. The problem I'm having, is that Illustrator uses by default to start the biggest points in the lower right corner, and I would like the "starting point" to be in the middle of the line, if you know what I mean. I'm always happy for the dotted lines start big, then gradually decrease in size, but I want to control where is the "beginning".

  I have attached pictures to show what I'm working with.

  Thanks in advance!

  Morgane.

  

  

  

  Genius! You reminded me of a quote from Khalil Gibran.

  What is obvious is that who has never seen until that someone expresses it all simply.

  Thank you.

• Flatten the control point handles

  Hi Expert Adobe and types of charitable :-)

  I work on a certain type at the moment and wanted to use the anchor points and handles control as an effect in the final work.

  I tried to use 'See the Bounding Box' after flattening of the text and made a screenshot to Photoshop.

  Using this method the anchor points are visible, but unless you select the particular anchor with the direct Selection tool,
  control handles are never visible. I must also import to Illustrator and use the tracing, which I do not think that would work very well...

  Is it possible to easily convert Illustrator guide marks and control handles at work?

  All greatefully suggestions appreciated!

  Thanks much :-) J

  I have good was at work

  The script is a bit too long to comfortably inside this message, and it seems you still cannot attach files, so download it from my site: www.jongware.com/binaries/drawArtHandles.zip

  Select one or more objects, and it will make a layer called 'Art Visible' (or use one that already exists) and all handles, anchors, bounding and whatnot boxes press. He "supports" (i.e., the prints handles) text, groups and simple traces. Gets all the rest - bitmaps, symbols, graphics... - the I am ignorant you treatment.

  (I noticed a small bug: sometimes Illustrator won't cooperate and refuses to set the color for the frame of the "bounding box".) What is happening with this? I don't know - everything else seems to be in order).

  Here's what it looks like - don't like, you have now all handles selected at the same time?

  

• Send the file as an attachment in Mail shortcut keyboard

  Hello

  I want to create a keyboard shortcut for the file selected in the Finder as an attachment in E-mail. So when I press the keyboard shortcut, a new message new message appears with the selected attached file.

  This was possible in previous versions of Mac Mail (Yosemite and earlier), but I do not see in El Capitan.

  Please comment

  Rgds

  ~ n ~

  Please open finder and select the file to attach (use keyboard shortcut command + A), copy it (control + C)

  Open mail app, click Command-N a new composition window.

  Finally, click the command + V is pasted the file.

  Thank you!