The system database password recovery

Similar Questions

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• The BIOS administrator password recovery

  I have a Compaq Mini CQ10-400 s/n CNC02648QX. My son has put both a boot password, we've been able to guess AND a second password necessary to access the settings of the BIOS itself that is lost.

  After 3 attempts, we get the error "system disabled 75582004.

  From what I've read in the forums, the error code is a human readable a master password hash. So I don't think all of the "e9". "passwords that I found posted on this forum already at work. (and they do not have)

  Can someone please send the password that I have to enter the BIOS and remove passwords my son put and point me to a tool that I can use to perform the decryption myself later if necessary?

  Hello:

  Reboot and try the code:

  60480020

  Google clear the BIOS password and there are several sites of your choice.

• access to the system without password

  We found a system in an abandoned storage unit and he turned, but we cannot go beyond the main login screen. Obviously, we do not have the password, so how do reset us the system or create a new user if we cannot go beyond the main screen?

  Contact the manufacturer of the computer.  If they have available, computer manufacturer will usually the installation diskettes to their computers at a reasonable cost.

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• M3800 Precision how to create the system for windows recovery disc 7 without cd player

  Precision M3800 does not come with CD player. How can I create rescue disk to restore the system or system to go back to a restore point?

  Chris Chan

  CD/DVD media is a thing of the past, you must use Dell Backup and Recovery to a 16 GB Bootable USB Flash Drive:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/

• Advanced POS 5.8 only sees the system databases in SQL Server 2014 and fails when attempting backup

  We have upgraded to VDP 5.8 has progressed today and installed the new SQL agent in 3 different SQL servers.  Two SQL Server 2008 work well with VDP machines - he can see all databases.

  But when I try to create a backup of the SQL Server 2014 computer, by selecting individual databases, the VDP device (such as it is controlled through vSphere Web Client) sees only the three system databases

  Master, MSDB and Temp.  And when I tried to back up the master database, the process has failed with an error various non-expose of reasons.

  Is there something special about setting up SQL Server 2014 to be backed up by advanced VDP?

  See M80ARM - Warrior of Virtualization: VDP Advanced SQL Agent permissions

  Basically, you need to either run the 'Backup Agent' service in a context that had rights to the SQL Server or you have enable the NT AUTHORITY\SYSTEM account with rights on the SQL Server.  Not obvious in the documentation, but that solved for me.

• System - no password recovery

  Although last year I got a virus on my computer and I got my laptop back. Great, it worked and I didn't have a problem until last month. I've been very busy so I left at the last minute. So I just tried it back now and I discovered that I can't because it doesn't let me do it without a password. Well if the problem is, I don't know what is the password, and I never set one before, so I do not understand why there is a crap password wanted on that!

  Well, what I do, I have not a password, my computer keep crashing, even though I opened a web site, and nothing works not because it crashes and I need to recover my laptop. What should I do if I don't have a password that works? And I checked for a CD in the box of my laptop, but no CD was found.
  

  http://support.Acer.com/

  Acer support at the above link

  http://support.Acer.com/drivers_download.aspx

  Driver Acer downloads at the link above

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  How to buy Acer recovery disks

  Contact Acer at the above links.

  It have a default password for the Recvovery system, which can be changed when you purchased the computer.

  Ask the password for Acer.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Deactivation of the system admin password

  I have a windows 7 laptop HP somehow disabled system and he asked an admin password I don't have if I get three passwords it comes up with the error code 65701645. Please help thanks.

  Hello:

  Please see this post and it should solve your dilemma.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/system-halt-error-message-or-BIOS-password-reset-generator/m-p/5010033

• the HP bios password recovery

  Help, please. Need password generated for a hp mini 1030nr. After the failure of 3 attempts fatal error code as cnu9091fmj appears.

  Hello

  Try to enter: e9lo1o384w (3rd character is a lowercase L)

  Kind regards

  DP - K

• How to reset the password for the system administrator for Time Capsule?

  I need to do a system restore to 2008 MacBook my wife of my 2014 Time Capsule, and I'm stuck at the system administrator password prompt. It does not accept the password to base such as revealed by the Airport utility station > base station > show passwords on my MBP, which is able to save and enter Time Machine, even if the TC is configured to use individual accounts rather than a single disk password. I'm nervous about any base station reset option in case I spoil my backup. How can I me?

  Although TC is configured to use individual accounts rather than a single disk password

  You must use the right of the user and the password in this case. NOT the password from the drive.

  I'm nervous about any base station reset option in case I spoil my backup. How can I me?

  Reset complete... It will not damage the backups somehow... It simply returns to the default values.

  Let me recommend to you if you want to continue using the TC in this way... (useless IMHO). Please do an export of the configuration before factory reset you.

  

  With the help of user and passwords in the TC is near useless. It only affects the side of the router...

  If you need more security using encrypted backups... but the reality is... the security more you add less useful the backup is likely to be. As you have now discovered... When you need it... you need as clear and clear as possible.

• After the system recovery complete original image

  Win 7 Desktop was unstable after a few years, and I wasn't able to run a successful restoration to any number of restore points, so just yesterday, I backed it up and ran the recovery of the system of internal recovery option in the Recovery Manager and not from disks.

  The process was nice and smooth, but in 'My computer', I noticed that my original image on the D drive already appears almost complete and wonder if this is the case?

  It shows only 327 MB 10.7 GB free space.

  My concern is it will be full in no time and leaves no room for new info in case it is always necessary.

  So my question is, or the original image is correct as this is what I have to do something now, even if it means another recovery?

  Thanks for the tips

  You are the very welcome

  Happy computing!

  Jaco

• The recovery of the system allow me to restore my previous setting because it says missing file (0 x 80070002)... How can I fix?

  Hi my names daniel

  My computer will not load past the system recovery options and I don't want to lose all my files, so I tried to restore vista windows to a previous setting from when I remembered last the computer works, however, when he made an error comes up saying that it cannot complete the process, because it lacks the file (0 x 80070002).

  Can someone help me on my problem?

  Hi Daniel,.

  I think you are referring to the recovery of the system for the restoration of the system, I want to know if it's something else.

  (1) what is the complete error message you receive?

  (2) to clarify, you try to run the system restore from recovery Windows (WINRE) or in the Office environment?

  (3) remember you to make changes prior to this problem?

  Method 1:

  Step 1: Start the computer using safe mode and then try System Restore. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select Mode safe
  

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  

  Step 2: Put the computer to an earlier point in time where everything worked well. To do this, follow the steps mentioned in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: You can run chkdsk to repair bad sectors on the hard drive in safe mode or from the Windows recovery environment.

  Run the check disk from the Windows recovery environment

  ) a command of Windows access (as shown in the link below) recovery: run the disk check to repair bad sectors on the hard disk.

  (b) at the command prompt, type chkdsk /f and then press ENTER.

  (c) now, type chkdsk /r and press enter

  See the link below
  How to access the System Recovery Options menu?

• SG300 how the cli password recovery

  Hello

  We want to change the password of our switch, but we don't know. We can gain physical access to the console, but he asked to the user and the password?

  We read that you can launch the start menu password recovery service. But, how can we get the boot without the password menu?

  Best regards

  Hello

  In order to reset the password in the start menu, you need to interrupt the boot of the switch process.  Console in and power cycle the switch, you should see the Cisco logo, then you have about two seconds press a key to get the boot menu.  If you miss it (or it expires once your inside) power cycle just the switch again to bring it up again.  The switch in front of me, it is option 3 to reset the password.

  However, it is possible to disabled this option, so if it is not available in the start menu the only way to restore access to the switch will be factory default by pressing the button, rest for 30 seconds.  Then you will need to reconfigure the device, but the default cisco/cisco connection you will get once the switch resets.

  Thanks for choosing Cisco,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.