the system fan to run at hi speed

Similar Questions

• Pavilion 7000: Computer freeze once the fan CPU runs at max speed

  Product name: Pavilion 7000

  Product model: 7 p - 1090d

  Product no.: QP177AA #UUF

  Operating system: Windows 7 Home Premium 64 - bit version.

  Computer blocks once the fan CPU runs at max speed. Initially, the computer would occationally freeze after waking up from sleep mode (CPU fan would be occaionally operate at full speed & freeze the system).  Now cannot load even in windows. It freezes at the configuration of the BIOS once the fan turns at speed computer crashes if the CPU fan run at maximum speed wherever you are!

  1. I did the cleanning & lubrication & even take the battery to reset the Bios but no success too.

  (Before I can reset the Bios it will run normally.)

  2. remove all USB devices except the mouse & keyboard

  3. detach & attach Ram memory & graphic card

  I saw a ROM_Recovery shunt on the motherboard label. Must I do? or can someone help, please?

  I sent to the center of HP service after a week, the service staff telling me that he was unable to go bad because my motherboard is the American version, which I have no idea what it means (my PC was purchased locally) but to bring him back.

  I solved my problem of tried to detach the Rams (2 actuators) & install only 1 on an another RAM slot first. This works. Then installed the second RAM on an another slot also without no problems so far.

  I have an old HP Office also having the location of the faulty RAM & also had replaced graphics card but it raise a peep sound error which easier to identify.

  I agree with you more HP, hardware problem is due to RAM or video card. Thanks anyway

• Satellite A300 - fan always runs at full speed after full stop

  When I stop the Satellite A300, the fan always runs at full speed.

  Hello

  What? Cooling modules run, even in this case, the cell phone is off?
  Press the power button for at least 4 seconds, then the laptop must be turned off.
  Disconnect the power adapter and remove the battery
  Wait about an hour and reconnect the battery and AC adapter
  Then switch on the device after a certain time of use of turning the unit off and check if the cooling modules would stop too

• Alienware Aurora R4. The system fan problems

  Hi, here is my story/problem...
  My computer is a desktop, Alienware Aurora R4. It is less then a year old. This problem started about 5 days ago now. I called the support technique dell twice. and they don't seem to help, I got frustrated with the phone so im hoping it will work...

  So here's the question: my system fan continues to operate at 4150-5000 rpm and only goes to about 1400-2200 rpm at idle. Today, it has begun to stop randomly. I watched 3 ambient temporary sensors all remaining 24-26 degrees Celsius. The PPI and the fans of hard drive are good at all about 1456 and 1089 RPM.

  Initially the RPM increased while I was gaming. but it did not take long and now whenever I try to do anything he will get very hard and RPM goes crazy. Originality, my PC would be slowed to about 1200-1400 rpm and only go up to 2200-2400 RPM, where the game. its almost as if it was under high load when it is not. and its cool so I'm sure that's not over heating.

  I disassembled the pc and cleaned all the fans and dust with the correct air boards. I have confirmed that everything is properly connected. When that didn't help, I found BIOS version A05 then I updated to the A07.  I ran the Dell PC Diag and it passed, the autopsy of alienware last, Ive ran several analyses of McAfee antivirus, reinstalled the Alienware command center and down the stock of dell pc - which posed problems. I paid and installed the mechanic system and fixed these issues.

  The first time I called Dell tech support guy was very friendly and I have not heard his name. He did lose his time with my settings of video card (not sure why as its only the system fan connected to the wheel and the pump, that is the question) he said that he had to be updated so it updated my video card, and that's all. told me he would send me the next day to check if it worked or not. There has never been back in contact with me, and I have no e-mail address. But all that adds to the question... because since he did this update my gaming experience is terrible. I only play World of Warcraft currently. Normally, my FPS are 75 to 100 FPS and now they jump around a bit, but mostly to sit at 2-17 FPS and sometimes go to 50 FPS, if I'm not moving. So im guessing the settings it's fair question... my card is a 2 GB AMD Radeon 7870

  Then, I recalled once again a day later. and the next guy was not as friendly. don't give me his name either. he wouldn't do anything, he just told me that the notes from the last call said that it was not a problem, and that it was quite normal heating. I'm sorry but my house is way cooler in the summer then it's winter and temperatures are always flat and stable. its blowing cool air and a large amount of air. He didn't listen at all.

  then the next day it remains to 4150 rpm for 90% of the day instead of 60% of the day. even if im not using it. And she randomly stopped several times. from what I can find on these forums and online that is as a module fail safe mode... so obviously it is not normal!

  As today is the first day it started to close I wanted to re-run the diag tests, but whenever I try, it runs for a few minutes, then the pc stops. The computer is running too slow, but this may be a different problem. I managed to get the dell diag and system mechanic to run tests, and they spent too. IM at a total loss...

  The air coming from the fan system is very strong and cool so I don't think there are more heating goes on. As far as I can tell the pump works properly and all the fans are running.

  This pc is less then a year old, so it is still warranty on it, as well as I, have purchased another year of warranty shortly before it started actually... And I don't want to try something else without help, because I don't want anything damage or damage my warranty coverage

  I'd appreciate very much any help im at a loss to know what to do, and feel the support tech will start ignoring me if I recall more. If you can help out you can reach me at my email which is [email protected]. Or respond to this conversation.

  Thank you and hope to hear from you,

  Katelin

  Hi, looks like your processor is overheating and your system shuts down in order to avoid that the components of frying. Install the utility core temperature and set up the readings of temperature on your hearts. www.alcpu.com/.../download.php  Your thermal paste can must be reapplied or your water fountain might need to be replaced. Let me know what your temperatures are for the carrots and the ambient temperature.

• ACPI fan constantly runs at full speed on Toshiba Satellite L505

  Hello world!
  I recently bought a new laptop (Toshiba L505)... everything works fine except the fan under Linux. It works constantly to max speed and I must say it's quite annoying. I know it is better to have a fan that runs continuously rather than one that is not light up at all, but I really want it to solve...
  See https://bugs.launchpad.net/ubuntu/+source/acpi/+bug/321578 for more information on this bug...
  I think that it is related to ACPI but I tried everything almos (acpi_osi change, acpi = force and other hack kernel). But whatever the OSs I throw (except Windows 7), it is always at full speed (I tried the Chakra (Archlinux), Ubuntu, and PC - BSD). With Ubuntu, I tried the last kernel 2.6.32rc7...

  Thanks ;)

  Hi sunrider.

  to understand why your machine is constantly cooling at high speed, go deep into the linux stuff...

  * but you can try "acpi = off" * instead of 'force' to give the os the ability to manage the material at the level of the api...
  Maybe there is an updated driver/module implemented who knows your chipset...

  If you "force" the kernel to manage equipment of this 'acpi' way and no module is there to do the work... you see it is a bad thing...

  or you are a geek and program a module that manages your chipset to acpi... If yes pls share it with the community...
  of course I'm kidding, writing of modules is not for me...

• The system fan is out on PC... need info. to replace

  Hello

  My PC is out after receiving a message saying that my system fan was about to leave.

  Which fan is, so I can order and is it hard to replace these fans? If I try to do, I want to make sure I order fan.

  HP Pavilion #a6700y model

  series #[number of Series edited by Moderator]

  Thank you

  Cheryl

  As I said, the fan should be a 92mm fan and the standard thickness is 25 mm. The rear case fan is a 3 son, not 4. See the diagram of the motherboard that I linked.  The fan speed must be within tolerances. Low fan speed will cause an error of automatic system.  Minimum speed must be 900 RPM.

• The system fan failure... Press F2 on the old card fan replacement mother M2N68 - LA

  Hello. I spent a while looking for a cure for this but no luck.

  I replaced the rear fan (and the whole case) on my HP p6110uk PC and now get «a failure of the fan system...» Press F2 etc. at the start of the system." Perhaps one of the three fan pins on the motherboard does not receive the right RPM.

  The fan works OK. I tried 2 new case fans and they work but give the same error on initialize toward the top. The original fan is detected OK and the error disappears when placed back attached to the same port on the motherboard fan system. There is no option of fan in the bios settings.

  I have tried both by resetting the CMOS jumper on the motherboard and remove the battery to see if it will remedy the error, but again, no luck.

  I was wondering about possibly updated the BIOS, but the official update of HP will not work. It's I guess because I am running official windows 7 upgrade (from Vista). Win7 x 64 does not appear for the provided.

  The site of Asus also has a bios driver for this kind of advice, but I'm not clear on the version required.

  Details:

  M2N68 - THE Mobo 5.00 rev

  (Pegatron) Revision of BIOS 5.38

  Optionally you can advise me, that error is quite annoying whenever I start.

  Booji,

  Thanks for confirming my suspicions.  As you have changed the case, you may have other options. What case?

  (1) re thinking - join old SYSFan (2) create a new exhaust (TOP).

• Dell PowerEdge Fans always runs in full speed

  Hello

  I have a problem with a Dell Poweredge 2900 server witht. The server is still running the fans at full speed.

  I tried to update the latest version of the bios and the firmware for environmentally sound management, but the problem is not resolved.

  Dell OpenManage shows only a single error, said of the intrusion into the chassis, casing is open, but case is closed properly. I think that the sensor is bad, I try to look for the switch, but I can't.

  Please let me know where is the switch of intrusion of the chassis on this server, or how to disable.

  Thank you

  As suggested by Theflash1932, the intrusion switch may be damaged and located on the Bay of housing Center fan. It cannot be replaced as one of its components. See the image below.

  

  It is replaceable like a Bay of housing of Dell part number: NF078

• Should I replace the system fan or any laptop?

  For the last day, I was doing some 90 b error code when I turn on my computer. It says my system fan does not work properly and could cause problems. If I continue however, it will work for about 7 minutes, and just turn off. The left back will be really hot.

  I called HP today and they will fix it for $180 & give me a 3 month warranty, but is it useful? My computer is only 2 years old. I could just replace the entire computer through my work. Should I repair or replace?

  It is a 15 "Pavilion amd8 quad-core, 8G RAM, 1 TB HD

  Moon.

  Cleaning would be easier to try.

  It is a G6 and you would have to completely demolish the laptop to reach the fan to replace it.

  

  Try clean it first.

  If this does not work, you will need to decide what is best for you.

  REO

• Lenovo Z500 fan only runs on high speed

  Hello.

  Recently, I removed the lid of my laptop to clean my fan and to change the thermal paste on the proc and video. But when I replaced everything back and booted up the laptop, my fan only works on speed continuously. No rattling, it works just like my proc is very responsible, but no hot wind, cold. I checked the temperature in the Speedfan program and everything seems to be ok, but I noticed that there is no fan detected. Same thing, I saw in Everest. I tried to watch BIOS, but there is nothing in the fan or temperature associated (I change my bios there is a moment so my F1 - F12 keys would swap with FN keys). And also, in the management of energy, I tried to remove the dust, but just ran fan as it removes dust every time, none of the changes, same high speed. I tried Driver Pack Solution, no results on the fan. Everything went very well before I cleaned it, I was just trying to make my computer train less.

  Please help me, thanks in advance.

  Alright, removed the lid once more and discovered that the fan wires melted because of the heat the tubes that will proc and the video, so the wire that controls the speed of the fan has been disconnected. Anyway, case closed, just need a new fan, will not appear anywhere it's for sale, but that is another issue for another day.

• What are the system requirements to run all downloadable desktop applications through creative cloud

  I want to buy a CC license for all my students in interactive media and want to know what is the specification of the computer minimum executing all desktop applications.  I don't want to find later that there is something that does not work.  Can anyone help please?

  Thank you

  Jane.

  Hi Jane,

  Please visit the following help documentation.

  System requirements | Creative cloud

  I hope this helps.

  Kind regards

  Sumit Singh

• T7600 PSU Precision fans occasionally runs at full speed for no reason

  Having a strange problem with my T7600 - no reason that I can see the power supply fans will ramp (for the period of approximately one minute) at full power and stay there, regardless of the load of the processor and the environmental conditions. My only options are to reboot the machine or wait (sometimes up to half an hour) for them to get by, and then they recede down to their silent whisper normal levels. The noise is unbearable and can easily be heard a few rooms away.

  Is this something that can be fixed in firmware or make me a defective unit?

  For some time now since the last incident with fans of PSU works 100%. It seems to have fixed itself, which hurts me a little uncomfortable because there was no action on my part that solved...

• Satellite A100 - the fan runs at high speed after idle standby

  Hello

  My laptop is Satellite A100-912.

  The problem is when I suspend it for more the a few minutes when the fan is running at high speed. This occurs on both Windows XP and Linux GNU. When the temperature of the two nuclei will more then 51 degrees C fan slows down and begins to work as expected. Suspended for a short time (about a minute or two) the fan speed is OK.

  I've updated to the latest version of the BIOS.

  Hello

  What version of BIOS you have installed? Has recently been the machine in for repair? A few interesting facts where I need some information to help you...
  By the way: is your machine still in warranty?

  Welcome them

• M3201desktop CPU heatsink/fan runs very fast to boot the system.

  Hi I have a desktop Aspire m3201 and I straightened the pins of the processor as directed by my first original post and I also fixed the heatsink / cpu fan who had a broken wing.

  Now when I boot the p.c.the HSK/fan works at very high speed, so I had to turn off the c.p.

  I would really appreciate help on this problem.

  Thank you

  tech1126

  That could happen because your computer heats.

  Please see the article below.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2354#_ga=1.212375575.263337500.1415824428

• System fan failed error after the Swap case

  Hi, I read a number of similar positions on this issue but has not managed to solve my particular problem and was hoping someone can provide additional guidance

  I recently moved my HP Pavilion Slimline S5280t with a Cooler Master case, everything is OK except that I now get a 'system fan failure, press F2 to continue "message every time I start the PC.

  I know for sure, it is caused by the rear 120mm fan that connects to pin 3 connector on the motherboard chassis fan (I tested it with the old 92mm fan and the error message disappeared).  So based on what I read on the forum, the simplest solution is to disable / adjust the configuration in the BIOS to monitor fan, unfortunately, this option is locked to my motherboard (IPIEL-LA3) model.  If at this point, I have 2 questions regarding what I can do next:

  1. I guess the fan sensor detects for the fan RPM so since this is a 120 mm fan, the speed of ROTATION is less than a 92 mm.  It does not reach some predefined threshold and that's why the error message I received.  So I can solve the problem by exchanging the 120mm fan which runs at a higher SPEED?

  2. I read that there is a hidden menu of BIOS with some of the HP PC, accessible by pressing F11 (or some other keys that do not appear in the original start menu), I have tried F11 and which has become a diagnostic tool, does anyone know if a hidden BIOS menu exists for my particular model? (PC model: S5280t, q8300 CPU, Mobo IPIEL-A3)

  In addition, I don't think that there is an update of the BIOS for my model either... so I'm really out of options here.  Please help if anyone has any suggestions.

  Thank you!

  HW7777, welcome to the forum.

  After consultation on your problem with Erico, another Member of the forum, here's what I was told:

  "The three-pin connector for the fan has + (power), mass (-) and an analog tachometer signal." Given that you have tested the old fan on the system fan header and the error message disappeared, you have checked that the fan is indeed the question. You should try another fan to see if it did not have the rear case fan which is connected to the Sys_Fan?  If produce the same results, then you have reason on the down low, the origin of the problem.   If you want to keep the motherboard in the case of Coolermaster then you should consider making or buying an adapter to mount it in her 92 mm fan. Since the Coolermaster case is much larger, you should be able to mount the fan somewhere. There is a lot more air in the Coolermaster case compared to the business slimline the mobo was originally in. "You are right that there is no update available BIOS.

  If your problem is solved, please click "accept as a Solution.