the technology of virtualization in the BIOS option to activate on my HP pavellion dv4-1120us laptop

Similar Questions

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Satellite A665-147 - how to unlock the BIOS option?

  Hello

  I have an A665-147, and I want to change the cpu voltage and other things to improve my battery life.
  But in the BIOS, you can do nothing. I remember my old PC that you could unlock the Advanced mode by pressing alt + F1.

  Could someone help me?
  I'm sorry for my English french

  Sorry but there is no help. These options of don t exist in the BIOS.
  If you want to improve the battery life you must reduce energy consumption.
  To that effect, Toshiba has designed eco-utility.

  Using this utility, you can use laptop with little longer than usual battery power supply.

• Satellite L100 - how do I change the SATA mode in the BIOS options

  Hello world...

  Why is it in the laptop Sat L100 that there is no option in the BIOS-> advanced where in I can change the drive to SATA?
  I saw it in another PC Toshiba laptop

  Hello

  If this option is NOT available in the BIOS, then you will not be able to change that!
  In this case the controller HARD drive will tell in SATA mode and if you want to install an operating system then you need to install the SATA drivers first!

  Good bye

• The BIOS option

  Hello

  Option is not available in the bios to AHCI 630 HP... Tell me how to activate?

  Hello:

  Please see my response to your other post on the link below:

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/AHCI-option-isn-t-available-in-BIOS/m-p/3539347#M44225

• Option in the BIOS to "permanently disable" Computrace

  Hello

  In the configuration of the BIOS T500 is the option:

  Security: Computrace: Computrace Module Activation

  with 3 possible values:

  • Enabled (default)?
  • People with disabilities
  • Permanent disability

  I think I understand how Computrace BIOS works: at startup, the BIOS checks and ensures that the necessary drivers/services are present in the operating system file system before the OS supported boots. The Computrace service then runs 'hidden' in the OS and, periodically, telephone reception.

  I want to know is what happens if I select the BIOS option "permanent disability". The auditor of Computrace/charger is removed from the BIOS? Is it possible to never turn Computrace at a later date, perhaps by flashing the BIOS?

  Thank you

  Frank

  This field allows you to activate or disable the interface BIOS Service optional Computrace (R) of Absolute (R) Software module. Of Absolute Software's Computrace agent is a service solution designed to help track assets and provide recovery services in case the laptop is lost or stolen. The Computrace agent communicates with absolute software monitoring server at scheduled intervals to provide follow-up service. By activating the service, you consent to the transmission of information from and to your computer and the control of absolute software server. The Computrace service is purchased as a separate option and the monitoring server will allow its module security officer through an interface provided by the BIOS. The official follow-up Computrace can be used only in the United States, United Kingdom, Canada and Australia. Computrace (R) and Absolute (R) are registered trademarks of Absolute Software Corporation.

  Disable = permanently block the Computrace module interface.
  Disable = block (default) Computrace module interface.
  Activate = Permit the Computrace module interface.

  The absolute anti-theft solution is currently disabled. Note the options to enable or disable will be permanently activate or deactivate the function and no changes will be allowed.
  ---------------------------------------------------------------------------------------------------------------------------------------------------

  In addition, if people are questioning the service - for individuals you can get info here: http://www.lojackforlaptops.com/learnmore.asp

  For all software solutions - the info is here: http://www.absolute.com/

• No AHCI in the BIOS in Satellite Pro A200

  I just installed an ssd and would like to change the bios to ahci utility but it is not an area that I am able to do this. the computer is a Toshiba Satellite Pro A200 (psfa1a-003002).

  I have to update the BIOS? Where can I get the update and how can I update?

  As I know the BIOS update does not offer some additional options. Please check the settings of the BIOS again. In the BIOS options there SATA advanced option and there you can change between compatibility and AHCI mode.

  I have it on my P200. It is almost identical machine but 17 and your model 15.

• Satellite NB10 - activate the BIOS supervisor mode?

  Hello.

  Just unboxed a NB10 - has and our standard policy to put a supervisor on the bios password.
  Now when I enter the bios setup during startup, it is by default in supervisor (e) mode no and I can't find any way to ask me the password to allow me to make changes.
  Does anyone know what I forget? All the options are greyed out and I can't do it asks me a password.

  See you soon

  Oliver

  > Now when I enter the setup of the bios when booting, it is by default in supervisor (e) mode no and I can't find any way to ask me the password to allow me to make changes.

  Usually if the supervisor password has been set, you can access the BIOS by pressing F2.
  Now you need to insert the supervisor password, or you can proceed to restrict access to the BIOS options by pressing the F11 key.

  If you have inserted the right supervisor password, you could delete it again in the BIOS Security tab.
  Usually, you will have to insert the right supervisor password and have to press ENTER twice just to remove it. Then save the changes

  Here is a brief description is what the supervisor password.
  http://APS2.toshiba-tro.de/KB0/FAQ9202JF0000R01.htm

• How to access the BIOS on Portege M400 configuration?

  Hello

  How to get to the BIOS options, F12 does not help.

  Hello

  What laptop Portege do you mean?

  If the laptop uses Toshiba Bios then try ESC and then F1, but if Phoenix BIOS has been installed on your machine in order to check the F2 option

  PS: on my laptop Toshiba HWsetup has been installed. In this tool, you can make also some modifications in the BIOS directly.

• Portege M100 runs at 600 MHz after the BIOS/FRIMWARE upgrade

  Hello

  I received a Portege M100, this week, installed Debian GNU/Linux (Sid) on it and almost everything was fine.
  Then I upgraded to the latest BIOS/FIRMWARE (from V1.10 to V1.50) and now my Pentium M 1200 MHz running at half speed.
  I can not load also cpufreq, which controls the speed of the cpu.

  I see this problem is already known, then:
  It will come a new BIOS/FIRMWARE fix for this?

  What do you mean by "I saw that this problem is already knowna? ¦ »
  Where do you find the description for a same problem?

  Usually the BIOS update should not have any influence 'wrong' on the speed of the CPU!

  Have you checked the BIOS option called "dynamic CPU frequency mode".

  This option is also in the Toshiba HWSetup. You can also switch between 'high' and 'always low '.

  concerning

• Satellite L650 - how to change the language of the BIOS?

  Hello
  I had received as a gift a portable Toshiba L650, and I see that the BIOS is in a language other than English.
  The OS is in English, so no problem.
  The BIOS is in Swedish, because a friend gave me her laptop.

  * How can I change the BIOS language? *
  Y at - it an option to do? or do I have to 'wash' (not really understand what that means)?

  + HELP! +

  Thank you!

  Hello

  Most of the BIOS versions included a language option.
  Turn on the device, press F2 to enter the BIOS and on the first page, you should see an option to change the language of the BIOS.

• Satellite C660-1tim: - cannot enter the BIOS due to the fast start feature

  Hello.
  I activated the quick start function that ignores the Logos and boots only from the HARD drive, but I can't enter or reset the Bios.

  I tried every combination of buttons, I can think.
  Power on + F2 does not work.
  F1, F10, F12, del, ESC, INS - all do not work

  Set BIOS to day 1, 50-win.
  Help, please.

  Hello

  To access the BIOS, you must turn on the unit first (press the power button) and immediately press the F2 key. You can press F2 repeatedly in the line to make sure that the button has been pressed.

  By the way: the Toshiba HWSetup is preinstalled on most Toshiba laptops.
  This utility provides the BIOS options and settings. So, you can change the boot order by using this tool also. You can find it in Toshiba Assist-> tab optimize

• Hot for the config of the Bios in my Qosmio F20-103

  Hello

  I have a Qosmio F20-103, windows xp has been installed on this subject, I need to install a new windows xp because I got the virus. I went into bios set up Boot Device Priority ad: CD-Rom-Lan-disk floppy hard-drive and I can't start my cd rom hollow something happens.

  So I went in the old and infected the system (xp operating system) device introduced my Xp Cd in the CD-ROM and show me the windows with a few options, so I pressed on install Windows XP now and begin to deal with some files and restar the laptop... when it turns turns out the laptop Boot and read my Windows Xp CD.

  So why this time did he? OK so I went in the press of Enter - F8 installacion program (accepts the terms of the contract) press on enter new install. but before that I had to remove the particion with XP infected previously ok I deleted everything and stars adaptation of the file... copied the 100% of the files requiered.

  Setup restar the computer and the load of a new system of xp we guess his will install the operating system (Xp) but the pop up an error message, new and clean so "insert the windows xp service pack 2 cd in the cd rom a pres enter" I said what! = S was the xp cd in the CD-ROM. I agreed bottom stamped and said. installers must 'asm' search for files for the directory to continue facilities plesea.

  Tried to search for this file, but it seems like there was no Xp Cd in the CD-ROM then I restar the laptop... this laptop will not start CD ROM more. The bios options has not changed.

  Now, I can not install windows, I don't know what to do. And I really need to install windows, but can't find a way to make the laptop starting by cd rom.

  I tried to re config the bios setting but nothing happened.

  You guys can give me some ideas what to do please?

  will be thanksfull with you.

  Sorry for my bad English.

  Hi mate

  The history of sounds strange for me

  First of all, it would be interesting to know if your CD/DVD drive is able to start using another disc; for example, a disk of Linux or a self created WinPE disc.
  (What is WinPE-> http://apcmag.com/windows_pe_20_a_tiny_version_of_windows_for_system _maintenance.htm)

  This would use to determine if the CD/DVD would start from all drives another.

  You can also try to boot from the Win XP disc by pressing the F12 key immediately after that the laptop is turned on.
  Now you should be able to choose ODD as a source of start-up, it will allow a start menu.

  Another idea. Maybe the CD/DVD drive cannot start until this special disc
  In this case, it would be advisable to copy the Win XP on another CD or DVD disc.
  After that, you can try to boot from the new drive copied.

  Of course the Win XP must contain the SP2!

  Last but not least don't forget to include the RAID drivers because the F20 supports RAID!

• Can E540 - I disable discrete gpu (Optimus) from the BIOS?

  Hello.

  I think with the purchase of a Thinkpad E540 with a gpu discrete nvidia.

  I intend to install linux on it and I really need optimus for him (nor is it well supported), but sometimes I'd like to be able to use it under windows.

  I would like to know if it is possible to completely disable the gpu nvidia from the BIOS so that it only works with the intel integrated an or should I buy one with gpu intel only.

  I read that the lenovo changed the implementation of bi - gpu on the newer generation thinkpads.

  I did some research but I couldn't know exactly what are the BIOS options; most of the results are on older laptops of gen.

  If any owner of this specific model could anwser would be great

  Please attach a screenshot of the settings of the bios if possible.

  Thank you.

  When you switch to discrete nvidia fits in the lowest power state, basically it is turned off. It will not be displayed in the Device Manager.

• Update the BIOS W540 2.18 cannot start any operating system

  I try to update the BIOS of the thinkpad w540 BIOS version 2.18.
  Everything seems to work fine and it tells me the update is flashed.

  But now, when my w540 starts, it does everything as usual, but when you start to load the operatig system it turn off and restart and that is again and again.

  I can get into the BIOS setup and the version is update a (2.18)
  I can change in the BIOS options and can I choose where my w540 boots. I try to boot from the HD, a CD, a flash, but no use (using Windows 7 on HD and flash Linux and ESXi from CD).

  My problem, I can not start any operating system present.

  Can anyone help please, thank you.

  In the BIOS under startup under Startup UEFI/Legacy, set options "both", "first heritage."