The temperature of the led

Similar Questions

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Satellite A350-212 on the fence the leds on my laptop

  Hello

  There are seven symbols that are related to windows media player on my laptop near the power button... I could close with touch first conducted before, but recently it does not work, I could not close all of the led or rather the power button close to ligtings on my laptop... I know that I don't have a big problem with my laptop but it is important to me, if you could help me with this, I'd be happy...

  Hello

  The first button turns on and off lighting
  I think you have some problems with the installed VAP (value added package).
  This is why I would recommend reinstall this package again
  Firstly uninstall the VAP system.
  Then restart the device and download the Toshiba VFR pilot European page.
  Then install again, reset the laptop.

  In order to get the FN button to work, you need to install the Flash memory card Support utility.
  If you use Windows 7, then you can download this tool updated Sat L500.

  Welcome them

• Airport Extreme works but the State of the led is off

  Airport Extreme works, but the State of the led is off, it is brand new and I can set up this last but the led stays off, showing no decided (green color or ambar)

  Could someone help with this?

  Thanks in advance.

  Hardware failure - defective leads.  Take that back for a new one, as big a PITA, you should.

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• How can I change/turn off the led under the speakers on Satellite P100?

  How can I change/turn off the led under the speakers? (in Satellite P100 (PSPA6E))
  Now I see the light only in the left side, but when I bought the computer left and right led line lights blue under the speakers.

  Gazz's right. It is not possible to switch off the LEDs. If just one LED is on the other must be faulty. Contact the customer Service of your country partner. I'm sure they can disconnect one too if you n t need her.

• Digital LOCKING button the LED on CAPS LOCK button - Satellite X 200

  Hello

  I just have a simple question (maybe): I recognized, that by pressing NUM LOCK causes the LED to this key to flash on, ok that is normal, but also the button CAPS Lock LED lights weak.

  Now, when I am pressing the CAPS LOCK LED becomes more clear.
  Turning off NUM Lock turns off the light, it of ok, the CAPS LOCK still burning bright (because he was in a hurry as well).
  Press CAPS LOCK again UPDATE disables the LED.

  More funny thing is: by pressing the CAPS of the forces of the Numlock lock to turn on and the LED of it...

  Any ideas or advice?

  Welcome Juml

  Hello Juml

  I read your ad 6 times now, but I still don t understand your problem. I have Satellite P200 in front of me and try to verify this but everything works fine.

  Please try to explain it again, but please, step by step. I understand what you mean.

• Satellite Pro L10 will not start - the LED blinks

  I have a pro l10 phone which, after sutting down as battery not return to life. All I get is 8 flashes on battery led when the button is pressed. It's the same area only, battery only or both.

  It sounds bad
  Generally, the laptop LED flashes as there might be a hardware malfunction.
  The LED provide a microcode and the technician can read this code.
  A common user is not able to read. OK maybe you can read it, but you will not find any description about the meaning of the code.
  That is why it s a good idea to contact the technician in your country

  But as a first step, try this:
  Remove the battery and unplug the AC adapter.
  Wait 20 - 30 minutes and then plug in the battery and plug in the AC adapter.

• Re: How to disable the LEDs on my Satellite L500?

  Hello!
  I have a Toshiba Satellite L500 laptop. The LEDs are activated 5 'under' the touchpad and one to the left of these (orange).
  How can I turn off, at night they are boring for me?
  Thank you.

  Hello

  This is the only way to turn them off is off of the laptop and unplug. Otherwise, there is not another method to do. the orange is witness of the wifi, you can disable it with switch Wlan if available or pressing Fn + F8

  Welcome.

  Post edited by: Jeka-HE

• Upstream the LED flashes constantly

  Why the LED flashed upstream nonstop? Is this a problem?

  I connected to a cable modem the following:

  Desktop

  Router NETGEAR Wireless

  Base Talk phone service device.

  Thank you

  Thank you! Problem solved!

• How to disable the LED on Satellite A210 Panel

  HY,

  can someone help my please?

  I want to disable the led on my laptop (this satellite sign shining in blue).
  I tried the Assistant but there is no option to turn on the light switch.

  Hello

  You can disable this illumination in the BIOS.
  Access the BIOS, set the disabled o lights and save the changes before you let the BIOS settings.

  Check it out!

• Satellite A10-S403D: NO start UP but the LED code flashes (flash)

  Hello

  I want to understand what is happening to my Satellite.

  When I try to start it, it does absolutely nothing but orange flashing:
  Short-Long, short-short-Long, short, Long, Long

  How can I understand the meaning of the code please? :-(

  Thank you very much for your help!
  Bye bye!

  Hello

  It is a firmware simply displayed if no hardware problem have been located on the motherboard.
  The LED provides this firmware and only the technician can read this code.
  OK, you will probably be able to read this code, but you will find all the details on the meaning of the code.

  I found a useful description how to read such a code.
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16497&MessageID=60354

• D7000 Firmware update to V1.0.0.26_1.0.1 causes stop the flashing of the LED

  After recently updated the firmware on my D7000 to version V1.0.0.26_1.0.1 the LEDs are no longer flashing to show the activity with or without wire. If anyone else has noticed this?

  What setting do you have LEDs on?

  

• Turn off the LEDs in the structure of the case

  Hello

  I was wondering if someone could help me solve a problem in a software test bench that I am developing. I have attached some of my code in which the problem is visible. I have a business structure that is triggered by a 'push button '. I want the TEST that is currently RUNNING LED remain lit until the end of the execution of the case structure (condition true) then shuts down once it is completed. But the LED does not turn off and remains lit. Is that what I can do in the condition False to activate the LED is off when the code is not running. Please note that to run the program, you will need to "run continuously. I want until the led turns off after getting the 'result' so that the software operator can know that he is free to perform the next test. But now when the 'Start Test 2 "is executed after 'Start Test', the LED stays on.

  It might be a simple solution that I can be not familiar with, but forgive me, I am a new user of Labview and I could not find a solution to this online.

  Thank you.

  Kind regards
  DPAC

  Hi DPAC.

  simple solution as requested:

  

• How can I manipulate a 2D led array so that the LEDs light up in different ways?

  Hello everyone. I hope someone can help me.

  I have an array of leds of dimension 2d 4 x 4. I want that the leds light up in two different ways.

  One, I want the leds light upward from left to right. In the following order:

  0.0 0.1 0.2 0.3

  1.3-2.3 3.3

  3.2 3.1 3.0

  2.0 1.0 1.2 1.1 2.2 and 2.1

  So in the end the entire table turns.

  

  The other, I want the leds light upwards from right to left. In the following order of the order:

  0.3 0.2 0.1 0.0

  1.0 2.0 3.0

  3.1 3.2 3.3 1.3-2.3

  1.1 1.2 2.1 and 2.2

  So in the end the entire table turns.

  

  Any help will be appreciated.

  
  

• Turn on the LED for periods

  Hello

  I am trying to write a code that turns on an LED if a condition is met for five seconds.  Let's say I am to evaluate the slope of a curve.  If the slope of the curve remains greater than or equal to 1 for 5 seconds, then the LED should turn on.  Initially, I thought I could use a number of cycles or the elapsed time express VI, where if my slope become greater than 1, then the timer would start.  If the slope is less than 1 before the second 5 mark has been met, then the timer will be reset to 0 and start the next time the slope become greater than 1.  Help, please!

  Thank you!

  foolysubmerged wrote:

  Hello

  I am trying to write a code that turns on an LED if a condition is met for five seconds.  Let's say I am to evaluate the slope of a curve.  If the slope of the curve remains greater than or equal to 1 for 5 seconds, then the LED should turn on.  Initially, I thought I could use a number of cycles or the elapsed time express VI, where if my slope become greater than 1, then the timer would start.  If the slope is less than 1 before the second 5 mark has been met, then the timer will be reset to 0 and start the next time the slope become greater than 1.  Help, please!

  Thank you!

  Using the elapsed timer express VI is a good solution. Use the reset entry as soon as the slope is located off spec.