The type of machine to 7 figures change when the renovation?

Similar Questions

• Motherboard model H535 failure - the type of machine and the serial number invalid after replacement

  Does anyone know how to set the new Type of Machine and the serial number after a motherboard for a replacement model H535?

  The motherboard has recently failed on my model H535 (7 months after the expiration of the warranty - thanks, Lenovo). No local garage would agree to replace due to its nature of owners (thanks, Lenovo). I spent about four hours on the phone being bounced into back-and-forth between the many support staff (usually combined) Lenovo in sales, technical support, support of parts of IBM and various other departments (thanks, Lenovo), which one has suggested that I might have to try to find a motherboard on Ebay or Amazon for my computer in less-than-2-year-old. However, I finally get to someone at Lenovo, which has been able to sell a motherboard - for 2/3 of the cost of the original computer.

  Now, I installed the motherboard, and it works. However, during each boot, I get a POST with two beeps error which reads as follows:

  00CE error: Machine Type and serial number is INVALID

  Start of manufacturing sequence is taken if no selection is made

  I presume that the BIOS on the new motherboard must be programmed with the right Type of Machine and the serial number of my computer. I've read various things on the Internet about what to do, as updating the BIOS (I can not even find a BIOS under "downloads" of support for the H535 - thanks, Lenovo model), using WinPhlash (I apparently need one kind of BIOS ROM file to make it work, I don't have), getting a Lenovo hardware maintenance disk for my model (which apparently isn't available for other special people only me - thanks Lenovo), etc.

  The waiting time for Lenovo support are ridiculously long, and almost every customer support person is ridiculously uninformed on the difference between one of their computer models, and even less their motherboards (thanks, Lenovo). I am amazed and extremely frustrated. It shouldn't be rocket science.

  On a side note, I initially bought the computer from Staples with a credit card with extended warranty protection, which means I can get a refund for repair. Although the motherboard came with a packing list, no Bill has been provided by Lenovo, and I couldn't make them send one - or maybe even with success to explain what a Bill is (thanks, Lenovo).

  Well, Lenovo support was useless, and any alleged authorized suppliers were in fact still suppliers or could help with my problem. But I was finally able to fix it myself. Once I found the right piece of software, it has been fixed in less than a minute.

  My BIOS is by American Megatrends, and I discovered that they have a set of utilities that includes a called AMIDEDOS. It is intended for manufacturers to be able to change the strings of text stored in the BIOS for things like the manufacturer, product name, Version, number series, UUID, SKU number, family, etc., that is what I had to do. It is not intended for use by consumers, but it's there.

  When I ran the "DMIEdit.exe" program AMIDEDOS (clicked and ran as administrator from 10 Windows) and click on "System information" from the list, I saw "Product Name | STRING | Invalid' and ' serial number | STRING | NOT VALID ". The other fields appeared to have valid entries. I double-clicked on the fields valid and changed their "H535 model" and the serial number of my computer, respectively and then clicked on "Update all" at the top.

  Much to my surprise, he reported that he had successfully registered the new information. And, perhaps even more surprising is the fact that, when I rebooted, the double beep and the warning about the type of computer not valid and serial number have disappeared. In addition, the BIOS showed I had entered the new values, and the 'Manufacturing Boot Sequence' option (I understand can be much slower than a normal boot) had disappeared.

  Again, I'm a little surprised simple it was actually solve the problem once I got the correct software, or Lenovo part nor American Megatrends apparently offers to the owners, and it took hours and hours of research and research to understand. Use this information at your own risk, however, as playing with BIOS apparently can lead to problems not easily solved. That said, the modification of these text strings seems relatively safe.

  I will mention that I also ended up changing the method of "LEGACY" to "UEFI" boot in the BIOS after noticing that the selection.

• X 220-windows cannot read the type of machine

  My X 220 recently had the motherboard replaced at a local authorized Lenovo service provider. They were only supposed to replace the fan but the connector broken speaker when they have been to remove the Board of Directors. Currently, Windows is not able to read the type of machine. System update does not work because of this. CPU - Z and hwinfo64 show the kind of machine that qqqqCTO as if she was a Virgin in the BIOS. Type of machine is properly in the BIOS correctly, but they left the serial number of the empty system. Could that be the cause?

  In case someone else runs into this problem: I solved the problem by running the BIOS update utility and using the option to change the model number. There is a note that says to delete what's there and leave the field blank to restore the factory setting. That did the trick.

• That the restoration of a backup time machine, a previous password change?

  That the restoration of a backup time machine, a previous password change?

  It could, if the last backup was performed before the change of password, and she understood this password file.

  But if you are missing a password, see this article on the search for your password with the keychain:

  Cess.html http://www.Macworld.com/article/2013756/How-to-Manage-passwords-with-keychain-AC

  The fact that Time Machine does not have backed up prior to the change, or discarded a way to backup older you may have missed an opportunity to save, if you have changed it.

• Battery and type of machine T420

  I want to buy a new battery 9 cells for my lenovo t420 and I wanted to know the machine type important when buying the battery is? For example, my machine type is 4178-A2G. The battery is supported by lenovo t420?

  Thanks in advance for the help!

  type of machine as xxxx-xxx is not important in the management of battery. T420 uses all of the same type of battery.

• Screen resolution/size changes when you use the touchpad

  Bought Probbok 4530 s. Win 7. I continue to have the screen/print resolutiom size change when you use the touch pad. The pointer seems to 'paste' and then when I move it, the screen get is much lower or higher. I continually have to type ctrl + or - to get the size of the screen back to the 'normal '. Is this something to do with the settings for the touchpad or pointer? Its driving me crazy...

  Bruce

  Hell, I think that this is it... Pinch Zoom! I have disabled that, as well as the "allow the theme change mouse pointers" on the pointers tab. I'm playing with it now, and it seems to have solved the problem. I'll let you know if this isn't... Thanks for the great help, Dragon fur!

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Import photos into lightroom on another machine and keep your changes.

  My hard drive has failed, but I could extract my lightroom with my pictures folder and place it on an external hard drive. Is it possible for me to import the photos in that folder in lightroom on a new machine and keep my changes I made?

  CHETNA response is good for running off LR the external drive.

  If you prefer to use an internal hard drive, simply copy the catalog and images to the new internal drive, then "relocate" images using the link of Claes.

• What all the files need sto be changed when you copy xlclient

  Hello
  I want to know what that all files must be changed when you copy the folder xlclient from one machine to the other. I don't want to install the client from the IOM and I am thinking copy just the folder. Will it work? Or do I need to install it?
  
  Please let me have the details.
  
  
  Thank you
  
  Published by: user11957197 on January 9, 2013 23:31

  You must change under content

  "* C:\Oracle\Middleware\jdk160_18\bin\java*" % DEBUG_OPTS % ^.
  -DXL. ExtendedErrorOptions = TRUE - DXL. HomeDir = * C:\xlclient* ^.

  Support:
  C:\Oracle\Middleware\jdk160_18 of JDK_HOME =

• Message: Shared spreadsheets cannot be changed when the number is offline now

  I just updated to IOS10. I can open all other spreadsheets in numbers (shared and non-shared) bar one when I get the above message.

  Locations - iCloud drive

  Hello babciax2,

  Thank you for using communities of Apple Support.

  I see that you are not abel to open a Numbers spreadsheet and get the error in quotes. This sounds like this document is defined for collaboration. Collaboration for numbers is explained in the following support article: collaboration for Pages, Numbers and Keynote

  This section describes what you see:
  

  Change when you are offline

  On Mac and iOS, you can only open a shared document when your device is connected to the Internet. If you are not connected, or if you switch to offline mode, all working, the application displays an alert asking if you want to work on a copy of the document offline.

  Best regards.

• I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update.

  I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason

  http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.

• Check boxes are displayed incorrectly < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

  Check boxes are not displayed properly checked < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

  Maybe you can try to use controlled instead of "checked".

• Bug: Façade objects relative position changes when you move the fusion VI on block diagram

  I posted a bug report on the LAVA, here:

  http://forums.lavag.org/front-panel-objects-relative-position-change-when-placing-merge-VI-onto-bloc...

  If someone at home OR can reproduce, can I please get a CAR #?

  Thank you

  -Jim

  Hi Jim,.

  This was reported to R & D (# 139212) for further investigations.  I don't know if it's more embarrassing fall into the range of functions and reorganize the façade or drop out of the front and hope that the code of the Subvi is not disseminated in the block diagram.  Because the code (or orders) are selected after a fall, and you can switch between diagram and panel above all keeping this selection, at least you can move the code as a whole, right?

• BlackBerry Q10 my settings change when I change the sim card?

  Hello

  I'm going to Croatia for a holiday. I would like to buy a prepaid sim card. Parameters of Blackberry changes or it would be the same when I change simicard?

  Hello and welcome to the community!

  Nothing should change when you do this. With devices inherited from BB, there could be some changes... but with BB10, nothing should change.

  Good luck!

• How can I disable the popup control in the user account that appears on my desktop to allow or reject the changes when I open a program without changing my user account settings.

  Original title: uac

  How can I disable the popup control in the user account that appears on my desktop to allow or reject the changes when I open a program without changing my user account settings.

  You want should not do that. These pop-up UAC is there to ensure the interaction of the user before executing a command or program. Disabling, allows even unwanted programs (= malware, viruses, Trojans) go ahead and implement themselves on your system without being noticed.