HP Officejet 8600 N911a copy questions!

Similar Questions

• HP Officejet Pro 8600 Premium copy Question

  I just bought a HP OfficeJet 8600 Premium.  I have legal paper in tray 2 and stationery in a status bar.  It can automatically select what size paper he needs or do I need to change it every time I have copy these items?

  Hi Vonnie52,

  If you happen to run across the following problem with tray 2 not detected on your Officejet printers, try the following steps that should help solve the problem.

  (1) turn off the printer

  (2) pull tray 2 completely out.

  (2) turn on the printer without 2nd tray

  (3) turn off the printer

  (4) install 2nd tray

  (5) turn on the printer

  Set the default tray to make Copies:

  Try the steps I provided below and let me know if this worked for you. My current setup for premium 8600 goes like this.

  Impression of the PC: Tray 2 is set as default Type on paper: plain paper

  Copy of the printer: Tray 2 is set as default Type on paper: plain paper.

  Tray 1 contains photo paper, tray 2 contains plain paper.

  This way when I print from the PC it always pull out tray 2 unless I select manually 1 tray to print photos. The same for Copies, when I make a copy he always starting from tray 2, unless I manually select to pull from Tray 1.

  Tray 2 as the default value for the copy configuration steps

  1. press on copy

  2. tap on settings

  3 change the Type of paper in paper-regular

  4 change Select tray 2 tray

  5 scroll and select set as new default.

  Press home to return to the home screen. Press copy, tap Settings and check if Select tray is always tray 2. The current version of the firmware on my printer is CLP1CA1136AR. You can check your firmware version by printing the printer status page in the Setup Menu.

• Paper jam false messages Officejet 8600 N911a

  Started receiving messages about 2 months ago.  It's happened to every 10 days to 2 weeks, but now it is happening more often.  The printer is used in general one or two times a day.  The message always appears when a print command is sent from the computer or you press the copy button.  In most cases, no paper changes or additions that have taken place since the last time that the printer was used.  Or changes in the ink.

  I have more attention to messages that come on the computer screen on the printer.

  Six messages to the point on the computer.

  1. Introduction to jam.  Tells me to remove the double-sided printing module.

  There has never been a jam it.

  2-5 lack of ink cartridge (each message appoints a different color)

  All of the ink cartridges are installed properly - and all the cartridges HP 950 and 951 appropriate.

  6. lack of printhead failed

  Print head is not absent, and it works fine most of the time.

  The only way I can go forward is to turn off the printer.  I get a message on the printer displays asking if I'm sure I want to do this (or something like that) and I proceeded to turn it off (that I don't have the choice).

  I wait a minute and turn it back on.  He me bawls to have turn it off then proceeds to realign the cartridges and wastes my ink, paper and time.

  I searched a lot of small pieces of paper in all the places that the travel document but never found any.  Please note that I can print without incident and an hour later I have this problem.  Once I went through the steps of the printer works fine until another week or day.

  When the problem occurs, it's ALWAYS before any paper began to move either from the toolbar State or feeder.

  Any ideas appreciated.

  "Hi lions99,

  Depending on the cost I might prefer to have an authorized service HP person make the semi full reset, rather than risk bricking the unit.  I have a problem, however.  Using the "Partner Locator - United States" I can't find such a repair centre.

  Don't forget that my printer is an Officejet Pro 8600

  First, select the product category: Printers & Multifunction

  So far so good.

  Then select a product family: Officejet.

  I have an Officejet Pro, which is not a listed option.  So I accept Officejet.

  Thirdly, select a product.  This SINGLE product is the Officejet 9100 series.

  I have no other choice, I accept.

  I live in Lafayette, Indiana 47904

  I started by putting in a 10-mile radius and received the following message:

  Sorry, we don't have a match for your search of partners. Please click search again and try to increase the search radius or using a different criterion.

  I increased the distance until I reached 3000 miles (anywhere in the continental of the United States) and got the same address.

  If I used the "HP local partner in my region" who had no option of mileage, I still get the same message.  Maybe it is because I don't have the right product, but I used what was available, hoping that a repair center works on my model, too.

  I do not want to ship it anywhere, so if you can not direct me to a repair center that I might be willing to drive to, I'll need to do the procedure myself.  If this is the case, I will contact you to confirm/clear upward by a few points on the process.

  I appreciate the help that you have provided so far and any additional assistance that could be provided.

  David ".

  It would be difficult to just walk up to a repair center and get HP to replace or repair the unit. Your best option would be to call HP@8004746836 and see which option they have that they will give you the same statement I made in the product Monograph.

  I suggest to call HP and see if they can help you by phone that might be easier to find a Service Center for repair near you.

  THX

• HP Officejet 8600 scanning/copying problem

  I have a 8600 all-in-one who recently stopped being able to scan or copy.  When you run a scan/copy, the page just comes out with vertical lines and black space.  I added a screenshot of the results of the analysis, but a copy gives the same.  Please help if you have seen this before.  I perform firmware updates and gone through the process of resetting due to disconnect.

  

  Rob, sounds like you are having a problem with your analysis. To open, what happens when you make a copy? That will let me know if this problem is hardware related or associated software. Then I know who will be the best way to proceed.

  
  Let me know how it goes and I'll get right back with you!

• OfficeJet pro 8610: copy question

  I am aware of both a pages facing two options on back page. Now, I'm trying to figure out if I can copy two pages in front of two pages by using the Officejet pro 8610.

  Hello

  The HP Officejet 8610 does not support automatic double-sided copy of a centre but only duplex printing.

  The duplex is only available model 8620 or 8630.

  You can use the HP scanner software to scan document manual duplex print it to work around the problem.

  You can find the specifications of the product below:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/HP-OfficeJet-Pro-8610-e-all-in-one-printer?JumpID=oc_r1002_usen_c-001_r0002

  Shlomi

• OfficeJet 8600 n911a print or not print

  I tried to... at last 2 days.

  OfficeJet Pro 8600 said ELT and blue light on indicating it is ready to network.

  Has been installed and worked great until noow

  When I try to print from computer it says "looking for printer" "printer not connected."

  my network config page looks good: ready wireless router good info, IPv4 seems good.

  I have the direct game Wireless off

  I tried to get printing to work and it does.

  I put it if no network

  Mavericks Mac 10.9

  Thanks for any ideas you may have

  Jim

  Hi kinfeman98, I'm assuming that you are tryng to use Airpirnt on your Mac for Officejet Pro 8600.  Not all this work for you? espcially the part on implementing market your router and printer.

  http://support.HP.com/us-en/document/c02623193

  Direct wireless set off shouldn't affect your Airprint if the printer is connected to the same network as your Mac.

• OfficeJet 8600 more - Installation questions and gel

  This unit has been installed and functional for since December. The main computer is connected via a USB cable. Other computers using the wireless feature. Now, nothing works. I uninstalled and reinstalled the printer several times during the last three hours. This was done using the installation CD and also download the drivers/installation on HP website. I also tried to install just by pluggin installed in the unit. Nothing has worked. I tried then connected to the router and go wireless alone. A couple of times showed the Panel of the connected printer. However the blue light continues to blink and nothing has worked. When installing via the USB cable, it showed "USB storage device" failed. Most often, he showed the printer as printer FAX 8600. I do not use or want to fax. The scan function has never worked. When the device is blocked, the only cure is to unplug the power supply. Any suggestion is appreciated.

  -Very well, it seems that you have problems some wide installation of the unit. A preliminary question which I don't see in the description of your problem, what is the operating system that you are using?

• OfficeJet 8600 N911a MAC wireless stopped working after installing Win 7 Hello

  Since my original installation of this printer in August 2013, I had a simple and flawless printing installation wireless for Macbook Pro (10,9), Macbook Air (10.7.5), iMac (10.6.8) (7.1.1) iPads and iPhones (7.1.1).  Last night, I tried to connect Win 7 laptop to HP via Bonjour.

  All devices except the iMac are now impossible to print.  10.6.8 OS seems to be ok.

  All devices to recognize the 8600, but nothing prints. iphones and ipads acknowledge the 8600, but nothing happens when I click on print.

  I tried to reset the default printer, download the drivers, reboot the wireless network, etc.

  HP printer utility opens fine on the Mac, and I can see the power levels and other information related to the printer.

  Help!

  Einstein said to do the same thing repeatedly and expecting different results is insanity.

  After reading the other posts on this forum, I have "reset" my mac printers, deleted my printers, reinstalled my printer, downloaded and installed the printer drivers, unplugged my router, power off my printer at least 3 times each, and that's all working again now.

  I believe in putting in place this laptop Windows POS on my print caused network failure.  I was no problem since I stopped using windows about 5 years, and then this.  Lesson learned.

• Have a similar problem with Officejet 8600 N911a.

  Horizantal with Magenta and yellow streaks. Cartridges new not mad any difference, nor with all 3 phases of cleaning heads print or the change of the route. Any comments would be appreciated

  Hi jdduece,

  If you have tried through the guides, I proposed and the impression is always the same, please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

• OfficeJet 8600 N911A: Officejet 8600 external hard drive error.

  Hello

  With this printer, if I connect a USB to the USB memory card it works without problem.

  I have an external hard drive that runs on the computer, but when I connect it to the printer it says something along the lines of, memory card error please delete.

  This printer does support external hard drives?

  No, the printers do not support hard drives.

• Printer (n911a) e-all-in-one HP Officejet 8600: higher margins when printing Pages

  I use a Hp Officejet 8600 (N911a) e-all-in-one model.

  Windows 7 64-bit SP1

  The printer is updated to the latest versions of firmware and software.

  Browsers: IE 10, Firefox Google Chrome 32 26

  It is using wireless (wireless router)

  When I try to print something, she often prints too large

  (for example, when you print a coupon, he eventually print half left of the coupon because half right extends beyond the margin of page). You can only print coupons a limited number of times.

  I am able to change the print size in IE 10 by right-clicking > print preview > and size reduction before you print it. Firefox is always printed on the margins.

  I tried using the print Hp and Scan troubleshooting utility doctor. It found no errors.

  Note: this problem is not occue when I choose to print to a different printer (HP LaserJet Professional M1217nfw MFP)

  I am a student, so I insist a lot on this printer. All advice is appreciated.

  Thank you!!!

  Hello

  It looks like firefox and printer compatibility. Firefox has just released a document fo adjust the print settings.

  http://support.Mozilla.org/en-us/KB/fix-printing-problems-Firefox

  Hope this will help you.

  Good impression

• HP OfficeJet 8600 not return status and ink levels

  Hello

  I have a new one (from this summer) a model HP OfficeJet 8600 (N911a) AIO

  Just run out of black ink on startup of the cartridges provided all.  At purchesed an Office Jet Valuepack 951XL and 950XL in preparation.

  So I replace the Starter 950 black void for the black of 950xl, all ok thing prints, scans/copies fine

  But when I launched the web interface to check the status of the printer status and ink levels are in red and I can't get the ink gas monitor section.  Screen attached.

  If I try to launch the HP printer Assistant for model nothing happening!

  Any suggestions please?

  RGS

  Steve

  

  Hi all

  OK I solved this problem. But since then, I had cause to rebuild my main desktop PC is so BRAND new HP software has been installed and the question has not reappeared.

  Thanks for everyone for entry

  Steve

• OfficeJet Pro 8600-COPY Question

  How to copy a page 2 faces on a page?  In other words, 2 face 2 face...

  Hello

  Please specify the exact printer model:

  The HP Officejet Pro 8600 (N911a) do not provide duplex ADF to scan a two-sided original, but only print double-sided.

  The HP Officejet Pro 8600 Plus (N911g) / Premium (N911n) however do not provide this feature.

  If your product is the Plus or Premium models, follow the steps below:

  In the main menu printer, click the copy.

  Double as original copy / 2 sides 2 sides and perform the copy job.

  Kind regards

  Shlomi

• several vertical black lines trying to copy using automatic power HP Officejet Pro 8600 N911a

  30 - 40 randomly spaced verical lines length of page when you try to copy using automatic feeder

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 n911a.

• HP Officejet Pro 8600 N911A: firmware

  I have a HP Officejet Pro 8600 N911a

  Serial No. [personal information]

  Product # CN578A

  Service ID: 23174

  Firmware version: CLP1CN1435AR

  QUESTION: Is the original firmware that came pre-installed on this printer purchased on 06/23/13.

  To be honest, I had problems with the operation of the printers over time, successfully resolved.

  I am led to understand that a later version of its Firmware is available. If that is correct, do I need?

  What are its advantages? How I did it acquire? Will receive installation instructions?

  There are further problems with the new Firmware? Thank you in advance for your help!

  ultimately, here's what happens: I had the chance to find a link on the site of "BD" that has allowed to circumvent the 'salary aid Tech' (involved only) help. For linking real chat... I got a tech, explained what was going on, he asked me to open Bitdefender a page says, asked what he's been selected... then instructed me to change about 3 settings. "BD" to close and reopen it... then try to access then asked me to test the "computer scan"... It worked like a charm! Apparently, BD software with the settings of the Moose saw an intrusion unauthorised and killed the linlk from computer to printer/scanner and killed the link.

  Once, I didn't know what to do in the future, everything worked fine... I can't tell you how many hours I spent with other BD technicians and HP is trying to solve this problem.  So, now I can place a document (etc.) on the printer scan window, go back to my computer open the link and the Voirledocument and adjust the scan size, part of the image, size and other graphic possibilities.    Because by sheer luck, I found a link to chat with a technician who knew their product and in a few minutes (not hours) directed me to a resolution that no cost me $ $ no matter what.

  Than k you, Lucien of Bit Defender!

  FORGET THE TECHNICIANS 'FEE' OF THE PHILIPPINES... (FOR REASONS I will not GO IN, I'M FLUENT IN 2 DIALECTS OF THE FILIPINO LANGUAGE - TAGALOG & ILANCANO), EVEN WITH THAT HAVE TOOL, HP 'TECH' could FIND THE TOILET WITH A TORCH!

  Message to MEG WHitman... Unload your stock, sell the House and get out of here before its TOO LATE.

  Even a deaf, dumb and blind person can comprhend this situation... Fill in the blanks...