The upgrade of MXP via TMS

Similar Questions

• The upgrade of Movi thru TMS

  Have a TMS 13.1 operation and VCS 5.1.1

  Downloaded the current model of implementation of the Movi 4.2 in TMS

  Followed their instructions on the configuration of the URL and Version of Windows software software windows

  Problem is Movi users do not receive the indicator that there is a new software to install

  Someone has encountered this situation?

  Thank you

  Anthony

  Hey Anthony!

  What you have configured in the directoy configuration?

  You might have seen for 4.2 and possibly later you define:

  • URL of the OS X software
  • Version of the OS X software
  • URL of the Windows software
  • Version of the Windows software

  But to send the info to 4.1 and earlier versions, you must set:

  • URL of the software
  • Version of the software

  I had put a http url to a Web site with information about the installation and the download link for win and osx.

  As you probably upgrade to 4.2, "Software Version" must be: 4.2.0.10318

  Replication of data to TMS for VCS must work, in order to check your Diagnostics Agent of TMS and

  try to eliminate other VCS erros.

  The info appears once commissioning is done, so for test disconnect them and reconnect.

  This works very well for us with older versions of movi, tms 13.1 and VCS X6.1.

  I also consider the upgrade of the VCs. X5.1.1 should work with TMS12.5.

  To use TMS13.1, you must be at least X5.2, I would recommend X6.1

  Martin

  Please vote the answers and make them answer if they are!

• The upgrade of old 3000 MXP for version 6

  I know that on the C Series codecs, you are entitled to software updates within the liberation of whole number, you are.

  Is it the same on the old line MXP?

  I have a client with a problem 3000 MXP. You can not buy a service contract for him because it is the end of LIFE. That being said it would be nice to have at least the last MXP (9.x) on it.

  I'd love for them to the launch and upgrade to a series of C, but I don't think that will happen.

  Thanks advance!

  -Doug

  You do not need to make incemantal steps, simply get a release for F9 key.

  Contact [email protected] / * / with your serial number info and see the notice.

  You should then get a unlock key that allows you to upgraded to the latest which is F9.3.1

  http://software.Cisco.com/download/release.html?mdfid=283688275&softwareid=280886992&release=F9.3.1&relind=available&rellifecycle=&RelType=latest

  Please remember useful frequency responses and identify useful or correct answers.

• My hard drive on my IMac has only been replaced and now when I log in Lightroom it asks the serial number. I bought LR3 years and upgraded to 4 via the web. I have original in my LR3 product code number but not the serial number for my LR4. How can I

  My hard drive on my IMac has only been replaced and now when I log in Lightroom it asks the serial number. I bought LR3 years and upgraded to 4 via the web. I have original in my LR3 product code number but not the serial number for my LR4. How can I get that?

  If you have purchased lr4 where registered with adobe, consult your Adobe ID account - using the same adobe id for purchase / register.

• I upgraded from CS3 to CS5 in December 2013. I have the original disks for CS3, but the upgrade was via a download. I need to reload windows on my PC and Photoshop. Can someone tell me how to download it again?

  Hello

  I upgraded from CS3 to CS5 in December 2013. I have the original disks for CS3, but the upgrade was via a download. I need to reload windows on my PC and Photoshop. Can someone tell me how to download it again?

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• Random OS freeze or crash after the Upgrade of the Sierra

  Since the upgrade to Sierra, I started experiencing random freezes or crashes, the operating system.

  In general, I keep the mouse control (connected via trackpad), for at least a certain period of time. However, only the movement is possible - applications cannot be selected, there is no reaction to the clicks, etc. Attempts to pass via cmd + tab don't produce no result.

  I tried waiting for the system to respond. She finally slept, then crashed with a wake on the lack of sleep.

  The other answer is a hard reset by holding down the power until button a restart is forced.

  I ran disk in rescue mode utility, and he reported no problems with the disk. I've yet to try some of the more esoteric answers as reset NVRAM and so on... which is probably intended. I saw a report that said this problem was happening with El Capitan, and there is no resolution. I don't know if it's the same problem carried over, or a new.

  I got exactly the same problem you describe, on an iMac of retina of 2014. I've updated all non - App Store applications I have thought (and removed dozens of them), disabled launch points, unplugged my USB hub, downloaded EtreCheck (very useful application, incidentally) and road to combing through reports in the Library/Logs folder. On a Reddit thread on the problems with the Macs wake from sleep after installation of Sierra, someone suggested using the following command in a Terminal: kextstat | grep - v com.apple

  The command shows you what non-Apple kernel extensions are running in the background. Extensions of core apps such as Airparrot, strap, and duo caused problems with macOS Sierra. In my case, officer was running a kernel extension - then I deleted this app and went through my library/LaunchAgents and records of the library/LaunchDaemon, remove all items launch left by home and others deleted apps.

  EtreCheck reports said that so-called SIMBL caused several accidents. So I got rid of this, by following the instructions on the site SIMBL.

  Here's the problem: even after all these efforts (and each variant reset, I could think of) troubleshooting, nothing has changed. My Mac always has exactly the symptoms you describe, upon awakening from sleep. Every time.

  In the end I just gave up and restored my iMac to its State, 4 days ago in a backup using Time Machine. (It took 12 hours). With Dropbox, I didn't lose all of the work I've done in the meantime. So, I am now running a stable El Capitan, with an understanding to why people wait a few months before installing the latest OS updates.

  Sorry I can't offer more useful troubleshooting options - but perhaps some things that did not help me could help you anyway? Thanks for posting: it seems that the Sierra has been a pretty smooth update for most people, so I guess we're just out of luck?

• Cannot move photos to the computer after the upgrade to iOS10

  Yesterday my iPhone updated to iOS 10 and now when I plug my phone into my PC (HP m6w103-dx / Windows 10 / iTunes 12.5.1.21) the computer will ba - beep once iTunes sync, charge the phone but I no longer have access to the photos via Windows Explorer folder.  The phone does not appear in Windows Explorer and I don't get the second ba - beep that normally, I had before the upgrade.

  I restarted the phone and the computer, then tried again with no luck.  I myself have sent pictures that were on my phone, deleted all of them film, then took some new pictures and tried again.  Still no luck.  Help!

  Your post is the 4th now ask about the same problem. One user solves the problem by connecting the phone to a different USB port on the computer. You might want to try it.

• How can I restore my pinned tabs that have disappeared since the upgrade to 39.0?

  I have my tabs pinned, put in place in 3 lines (default) and 4 columns (user set). Since my upgrade to 39.0, my bottom line is not visible, but my aboot parameters: config are 3 x 4.

  You can zoom the subject: newtab page to resize tiles and tiles most enter on the page.

  • View > Zoom > Zoom out; CTRL and -
    'Zoom text only' should not have a tick

  This will affect all elements of the page, text so get more smaller institutions.
  Make sure that a tab with the subject: newtab page is open when you change the zoom of the page.

  Toggle the pref browser.newtab.preload false on the topic: config page in case of problems with remembering the zoom on the page of the on: newtab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Since the upgrade to 31.7.0 I can't delete or move messages SOLVED by updating to the version 38

  Hello

  on Wednesday I have Thunderbird updated to Version 31.7.0 on Ubuntu 14.04. After the reboot, I am not able to delete messages in one of my accounts. I have 12 accounts, two of them are POP accounts, either use IMAP. Thunderbird recognize correctly as junk mails, but I am not able to move them to the trash. Also if I try to send a mail, Thunderbird can not move mail in the sent or drafts folder. If I want to move an email to a folder to another, can't do too.

  Sometimes after a fresh reboot of Thunderbird, I can delete and send mails without problems, but after a while, the problems occur again. It is very annoying and I don't know why this is happening. I even deleted my Trash.msg and the corresponding files, then created a new folder in Thunderbird trash, because I, although there is a problem with this file. Interestingly, he worked for a while and I was able to delete emails, but in the first place it has nothing to do with the problems of moving emails, save in drafts or sent folder.
  I also copied my entire profile of ~/.thunderbird/xxxxxxx folder. Nicolas ~/.thunderbird/xxxxxxx. Nicolas2 and added to profiles.ini, but which didn't help. -safe-mode is also not working, and even remove the largest of all mailboxes mailbox with more that 5 GB of emails helped anything.
  Until I forget: I have put all the 'mail.server.serverX.max_cached_connections' to 1 because I found a thread via Google where someone said that would be useful, but it wasn't.

  I really appreciate your help! Thank you!

  The problem disappeared after the upgrade to version 38. Special icons are all there.

• Fonts I have installed in the font book are missing after the upgrade 10.11.6

  I ran the upgrade recommended this morning at El Capitan 10.11.6 on my end 2011 MacBook Pro. A certain font was not available when I opened an Illustrator document, so I opened the font book to see why and found that hundreds of fonts, I entered the book of policies over the past year or more are missing. I know that real fonts are still in my police records, but a number of hours of work participated in their addition to the font book and organize them into folders. Is all the work is lost, where can I access the preferences that contain this information somehow? What a brake if not. Font book does not yet have all folders that I put in place, they are just empty and only the core system fonts are loaded.

  Unless I can access the old prefs I guess I also install all my software again, to make sure that necessary fonts are loaded?

  Help!

  John

  cjohna wrote:

  I ran the upgrade recommended this morning at El Capitan 10.11.6 on my end 2011 MacBook Pro. A certain font was not available when I opened an Illustrator document, so I opened the font book to see why and found that hundreds of fonts, I entered the book of policies over the past year or more are missing. I know that real fonts are still in my police records, but a number of hours of work participated in their addition to the font book and organize them into folders. Is all the work is lost, where can I access the preferences that contain this information somehow? What a brake if not. Font book does not yet have all folders that I put in place, they are just empty and only the core system fonts are loaded.

  Unless I can access the old prefs I guess I also install all my software again, to make sure that necessary fonts are loaded?

  Help!

  John

  Use your backup Time machine restore.

  Your book plist police is located on via Finder > go > go to folder, copy and paste:

  ~/Library/preferences/com. Apple.FontBook.plist

• Cannot turn off after the upgrade to 10.11.4

  I have a late 2012 3.4 ghz i7 iMac / 32 RAM 10.11.4 running (and other iMacs around the office): I can't stop. When I try a stop down (after removal of servers/TimeMachine, close all applications - even unplugging the ethernet cable) - it goes to a black screen with the "circle of rotation of lines." They will be 'spin' this weekend if I let him. Instead, I'll put the machine to sleep during the week and make a hard cock down via the power button Friday night.

  I think it has something to do with the upgrade to 10.11.4. I have reset the PRAM and tried also to start up in the 'hidden' startup disk and first aid running without result. Tried to find preferences for throw - unsuccessfully - Finder found "com.apple.finder.sfl" I should throw?

  Another change is that now I'm using a new Pegasus2 18 to RAID hooked up via "2016" MacMini and Apple server software (replaced my Apple XServe)

  Someone at - there a method I can use to stop? Thanks for your help!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Satellite L305-S5968 - after the upgrade to Windows 7 I have not access to Internet

  I really need help.

  I got my disk to upgrade to Windows 7 yesterday, and I ran everything that he said. The upgrade wizard does everything what it was supposed to, the computer rebooted, installed everything correctly and my initial startup of Windows 7 was very well, everything worked perfectly and then suddenly I could no longer connect to the internet via wifi more and my USB keys do not work.

  I checked the drivers and reinstalled everything but it still doesn't work.

  My laptop is a Satellite L305-S5968 any help would be greatly appreciated.

  Hello

  I founded the same issue here, and first of all, you should read this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49617

  Also, make sure that the WIFI is enabled with the material and the FN + F8 key combination switch.

• No sound through your desktop since the upgrade to OSX10.11.2

  No sound through your desktop since the upgrade to OSX10.11.2

  There are several possible reasons for the release of its failure. Please take each of the following steps that you have not already tried it. Some may not apply to your model. Stop when the problem is resolved.

  Back up all data before making any changes.

  1. start by the steps recommended in this support article. Do not skip any step. It is the starting point for further efforts fix.

  2 make sure that you have an installation fully updated to Mac OS X.

  3. If you have installed an application called 'Own memory' or any other third party software that is supposed to 'clean' or 'purge' memory automatically, remove it according to the instructions of the developer and restart. You should do this even if the software is not causing the problem, because it is useless.

  4. other third party which has been reported to interfere with an audio software includes the "Boom" and "Samsung Kies". If necessary, uninstall instructions of the developer (not not by dragging something in the trash.)

  5. If a device AirPlay is selected for the audio release of iTunes (or other applications via third party software such as "Wing"), deselect it.

  6. launch the application 'Setting up Audio and MIDI' by entering the first letters of his name in a Spotlight search and by selecting it in the results (it should be at the top). Select output integrated in the list on the left. If the mute boxes are checked, then.

  7. If a red light is visible in the port of audio when its must play, the internal switch is stuck in the position of the digital display. You may be able to release it by inserting and removing of a mini stereo plug of adequate size. If this is not the case, the machine needs to be repaired. Insert any kind of tool in the port can cause damage that is not covered by the warranty.

  If there is no red light, the switch can always be locked in the position of the helmet. Try to clear the same way.

  8 disconnect all devices wired except the keyboard and mouse, as appropriate. If more than one display is connected, unplug all the extra zeros. Restart and test.

  9. If you have a MacBook Air, turn Bluetooth off and restart.

  10 start in safe mode. Do not open a session; Just restart as usual when the login screen appears. When you do, make sure that the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and the sound does not work.

  11. reset the NVRAM.

  12. Reset the SMC.

  13. triple - click anywhere in the line below on this page to select this option:

  /Library/Preferences/Audio

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. You may be prompted for administrator login password. Restart the computer and empty the trash. Re-create your settings in the sound preferences panel.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  14. reinstall OS X after you back up all data.

  15. an appointment of 'Genius' in an Apple store.

• SL510 crashed in the middle of the upgrade of the BIOS.

  I had to reinstall the operating system (Windows 7) using my rescue disks after that my computer has been infected by a virus. The re-installation went well and I went to download a series of updates through Windows Update. I also did a few software updates via the tools of Lenovo. While it was the upgrade during the night, apparently he hung on the BIOS upgrade and did a variety of noises so my wife am bored off the computer. Now I just get a black screen when I turn on the computer. The hot spare no longer work. I also tried the BIOS boot CD (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013595) and who did nothing no more. Any suggestions?

  
  

• My white disc light WD external network is no longer visible in the Finder since the upgrade to El Capitan, drive always is accessible from the Windows PC network.

  Problem is roughly according to the title. I had a white WD external light of diving for quite awhile now and I currently plugged it on the same network switch as my iMac, and the printer. Since the upgrade to the latest version (pretty sure it's) El Capitan I see is no longer the drive in Finder. There is an old Windows PC that is connected to another network down switch and who can access the drive of property. I have reset the drive and the iMac and replaced the local network cable.

  I have some technical knowledge, but I'm not a COMPUTER guru.

  Ch6tty

  Can connect you via CMD-K (to connect to the server) and type the IP address / name of the network-share?