The upgrade of Windows 10 Wizard - blocked on all "prepare them for your upgrade" at 0%

Similar Questions

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image

  original title: video editing

  When im trying to add a family film about the Director of windows it is not not all there, he's going for about 20 seconds, then on the next image. How can I see the video in its entirety, but long, so I can change it to what I want?

  What is the extension of the home movie file?

  Windows Movie Maker doesn't accept the formats of files (extensions) following:

  Video files: ".asf", ".avi", ".dvr-ms", ".m1v", ".mp2", ".mp2v", ".mpe", ".mpeg", ".mpg", ".mpv2", '.wm' and '.wmv '.

  * Extennsion file or the file format is represented by the last 3 letters of the file.

  If the file format of your home theater is not on the list above, google for a FREE video converter and a change in WMV format. Then re - import to Movie maker.

  WMV is the most reliable and foolproof format for Windows.

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  Windows media player dvd region

  After you apply an update to the media player, I now get the error message

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  natuarally ive checked the area defined for the reader and even tried to re applying the region

  I then noticed its doing the same thing with dvd stored on my media server, and while he would not even play MPEG or avi stored on my hard drive

  I went to my comments to logon (standard user) media player works fine

  so I'm back and tried to reinstall the mediaplayer to my admin login, it wouldn't let me not delete it, ran Media Player microsoft penalty shooter, he said everything ok

  so I changed the guest account on an admin account to try to remove it from there, but as soon as I did this mediaplayer stopped working in the feedback connection that leads me to believe its a sort of level access virus, that has permeated the media player or a defect in this connection required to complete admin update media player

  Hello

  ·         Have you tried the steps in method 1 of troubleshooting?

  ·         Do you have any code or an error message when you try to uninstall Windows Media player?

  Method 1:

  You can try to connect the different DVD player and check if it works.

  Method 2:

  You can re - register wmp.dll file and check if it helps.

  (a) log on as an administrator.
  (b) click Start, type cmd in the Search text box, right-clickcmd.exe, click run as administrator, and then click on continue.
  (c) at the command prompt, type regsvr32 wmp.dll press ENTER.

  Method 3:

  You can also try to create a new administrator user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• Error when you try to play a DVD: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  copy a group of photos w/music (Smilebox program) on dvd;

  After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  We live in the Washington area. I didn't know that DC was considered an unusual geographic region?

  Hey nongeekbetty,

  The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.

  Step 1:

  Make sure that the DVD region is set to the appropriate region:

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. right-click on the DVD drive.

  d. right-click on it and select Properties.

  e. make sure that the region will be resolved.

  For your information:

  http://Windows.Microsoft.com/en-us/Windows7/playing-DVDs-in-Windows-Media-Center-frequently-asked-questions

  Step 2:

  Also temporarily disable User Account Control (UAC) and check it out.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Note: Activate it once you are done with the check.

  Kind regards

  Savan - Microsoft technical support.

• Media Player error: IWindows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  =========================================================
  Best bet would be to download and install the free software
  VLC media player... it should play the video without the
  you need to change the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win64.exe)

• Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.

  BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.

  Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

  

  The hold button SHIFT DOWN when you start iTunes and when you see this message:

  

  Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

  For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

• During the installation of Windows XP, he became hooked on "install applications" for 5 hours?

  After you have reinstalled XP with the original CD, I'm hung up "installation applicatlons".

  Successfully completed the reinstallation of Windows XP.

  Hang up on "install applications" took place at the end of the resettlement process, so I simply turned off the power, restarted, and now clean my WHAT nice, XP works fine.

• Open the file 'C:\Windows\system32\ctl3d32.dll' could not be please check your disk is not full and that you have access to the destination directory. Access is denied.

  I am running Windows 7 Ultimate x 86 version and tries to install exPressit (by Memorex) is a very simple program and I just reinstalled Windows 7 just before so I have a new facility, 230gig of free space and 3 GB of ram so it could just be no proplem. Ive tried running as administrator and also replacing compatibility down to xp and Vista. I currently have 3 other computers using this program with Xp Proffesional, Windows Vista Ultimate, and Windows Vista Home Edition with no problems at all, so any ideas would be great cause if I don't find a solution quickly, that I have to downgrade to Vista.

  You should contact the support of exPressit on the compatibility of Windows 7.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Windows 7 pro deactivation lexmark all in one for pilots.

  I have 2 different Lexmark all-in-one printer / scanner. Windows 7 pro in just the last 2 weeks, via a download/update made my Lexmark x 2470 useless, corrupt some thing in the firmware and disabled drivers for my Lexmark 4530 thus making it unusable. Anyone having the same problems, have their software Lexmark corrupted by Microsoft updates?

  Hello

  Please contact Microsoft Community.

  Let us know the exact error message you get.

  Make a test with the steps below:

  Step 1:

  Try to run the troubleshooting of the printer utility.

  Click Start.

  In the search bar, type troubleshooting.

  Select the printer in the list and click Next.

  Step 2:

  Turn on Auditors invited on all computers.

  Step 3:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Turn on WE network discovery
  Turn ON file and sharing printers
  Put IT in the section sharing public folder
  Turn ON password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. Don't STOP FIREWALLS; CONFIGURE them PROPERLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT CREATE PASSWORDS, EVEN IF ONLY the MOST SIMPLE . If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers.

  How install a printer connected locally to a different computer if the driver installation routine does not help:
  
  Go to the computer to which the printer is connected. Note the name of the computer that you will get to the control panel > system > computer name. Now in the Panel, go to the printers. Find the printer in question, right-click, and then click Properties. Note the name of the share. Of course you must have already set up file sharing / print on all computers involved and share the printer.

  Now, go to the remote computer to which you want to add the printer. Control Panel > printers > add printer

  Click Add a local printer. Click on create a new port. The default value in the drop-down list box is Local Port. Don't change that. Click Next. A dialog box appears for you request that you enter a port name. Type in the \\FullComputername\SharedPrintername

  ex: \\mycomputer\HPDJ (that's why you wrote the names of computer and printer in the first step)

  Click Next. In the manufacturers list, select the correct printer manufacturer and the correct printer model in the Printers list. Under "do you want to use this printer as default printer select"Yes"(if you do!). and click Next. When asked to print a test page, select 'Yes', then finish.

  Configure file sharing / print:

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Share a printer:

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  I hope this helps.

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• I WISH THAT ALL PAGES TO FIT ON MY SCREEN SO I CAN'T USE THE ARROW LEFT AND ARROW RIGHT! THANK YOU VERY MUCH FOR YOUR HELP!

  MY PAGES HAVE BEEN VERY WELL UNTIL I DOWNLOADED SOMETHING, I DON'T KNOW EXACTLY.   I THOUGHT I TRY TO DELETE WHAT I DOWNLOADED ARRIVE TO WHERE I WAS, BUT I DON'T THINK IT WORKED OR I DELETE ANYTHING!  SO I'M GOING TO STILL USE THE ARROW LEFT AND ARROW RIGHT TO VIEW ALL PAGES.  I WENT TO CONTROL PANEL, DISPLAY, SETTINGS, WENT TO A HIGH NUMBER TO THE PIXEL NUMBER LOW, CE WHICH WAS THE ONLY SOLUTION POSSIBLE, AND ALL GROW.  SO I PUT IT BACK TO THE LOT WHERE HE WAS!  DON'T KNOW WHAT TO DO, SO HERE I AM ASKING FOR HELP!  Thank you!!!  MY email * address email is removed from the privacy *.

  First remove everything you have installed, check if it works.

  In case of failure and then update the display on the computer drivers

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• How to do the work of o Lexmark X 1270 Application all-in-one for Windows 7

  Hi guys, I have purshased anothercomputer and am running Windows 7. I installed my printer (Lexmark X 1270), but the all-in-One application does not work. Can anyone help this problem the mein.

  Thank you

  Yahya

  E-mail address is removed from the privacy *.

  You must install the full software from Lexmark support features and not just plug

  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X1270&focusedTab=downloads#2