The usb ports are 2.0 on a HP 9280 e t computer?

Similar Questions

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• The Device Manager on my Windows box lists a hub USB 3.0 as one of USB controllers. This means that one or more of the USB ports are capable of 3.0?

  I recently bought a backup disk says he would run faster is it my 3.0 instead of 2.0 USB ports.

  Just try to understand the computer itself, if one of the 8 USB ports on my desktop Dell (Windows 7, 64-bit box) is capable of USB 3.0.

  Hi John,.

  The message that Windows gives is Windows telling you put a USB 3.0 device in a USB 2.0 slot and the speeds will be Cap using USB 2.0 footrest.

  If you are looking for your system on the website of Glens, it should tell you if one of the USB ports are 3.0 or not.  I think that USB 3.0 is marked with the blue wire around the ports.

• Error when the USB ports are empty: "USB device not recognized".

  Original title: get popups for error USB malfunction even if nothing is plugged into one of my USB ports

  I get this error message appear several times on my computer hp laptop with Windows Vista Home Basic: USB device not recognized. One of the USB devices attached to this computer has malfunctioned and Windows does not recognize him

  But I have nothing in my USB ports! They are all empty. I removed everything. Nothing can stop this popping up every 15 seconds. I tried to uninstall all USB drivers in Device Manager, but this thing keeps popping up. Please help me. When I plug in devices to my USB ports, they always seem to work properly. The error message appears totally disconnected the actual functioning of one of my devices.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Try running this fixit and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  It will be useful.

• The USB ports are powered ports on the DV6-1250US?

  Y at - he of the ports on the DV6-1250US powered?

  Hello

  All USB ports must be supplied.

  Kind regards

  DP - K

• Where are located the USB ports?

  I think to buy the G60-216EM, but I was just wondering where the USB ports are located, because there is no 360 degree view of the laptop.

  Thank you

  There are 2 USB ports on the right side of the laptop and 1 USB port on the left side.

  I hope this helps.

  Pete

  BTW...

  At the top of this page, you will find a search. Enter the number of the model of the computer and press to enter. This will take you to the support page where you can download the manuals for the laptop you want. You can read and get a pretty good handle on where everything is.

  Have fun.

• Installation of SP2 on my Satellite Pro L10 causes the USB ports fail

  I just installed XP SP2 on my L10 and USB ports no longer work.
  There is no error in the Device Manager, the device in the USB ports are not recognized.

  I removed SP2 and USB ports are functioning again.
  Model No.: PSL15E-00H018EN

  Any suggesttions? Thanks in advance.

  You simply remove the USB controller from Device Manager.
  After that the new charging USB ports should work again!

  Also see this MS article:
  http://support.Microsoft.com/kb/892050/en-us/

• plotter / cut not the usb ports

  I recently moved my office and cutting cutter / plotter in another room. Now, for some reason, my vinyl cutting software does recognize not all USB Com Ports and therefore, will not cut.  (I tried configuring it for each port with no luck). When I open devices and printers and look at USB / series of properties of Strawberry, it shows that its on Com9... and I have 6 USB ports I know.  First question... where I expect to identify the USB ports are what #s.  4 behind the pc and 2 in front.

  Com is a reference to the COM port and is a "serial port".  Replace the USB port.

  PS <>, change the hardware configuration does not cause this problem.   Someone changed the settings.

• Keep the power to the USB port after stopping down?

  I would use one of the USB ports to plug in my cell phone to load from one day to the next off the computer. What are the steps to follow to set computer to keep providing power via USB ports after shutting down the computer?  I'm a novice so need to know where to find the place that controls the settings and what to click on. Thank you!

  If you put the computer in Standby Mode when you stop, the USB ports are not powered off.

• I need to adjust my bios so that my usb ports are active immediately.

  I can't go in safe mode because my keyboard is a keyboard wired usb and the usb ports are not on the time that I have to press F8 (or any function key). I understand there is a setting that I could make to the registry. Can someone give me the specs?

  I'm using Windows 7 Ultimate 64 bit with a HP Pavilion Elite M9600t

  I bought the Logitech K800. It works very well (touch wood). The function keys, I get into safe mode, etc.

  DETECTIVE CONAN. Thank you!!!

• USB ports are not available

  My host is a laptop Toshiba with Ws 7. The USB ports are fully operational. However, with the players that they are not. for example, XHDD is not on the desktop "XP".

  What to do so I can make use of the USB ports?

  Hi Redoak716,

  You just need to add a USB controller to the hardware of your virtual machine configuration. Make sure VMware tools are installed and running in the comments.

  Once your virtual machine is in place and your USB drive connected to the host, attach it to the guest using the control panel of devices on the lower right part of the screen of the console. It will be detached from the host that it cannot be used by the two systems at the same time.

  It will be useful.

  Concerning

  Franck

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• USB ports are damaged on the Satellite C660-1R3

  Hello friends:

  I accidentally connected a dde on usb port. After that the usb ports does not work.
  I contacted a friend.
  U14 circuit on the motherboard (usb circuit control) damaged with its Nember.
  the pc works great except for the two USB ports.

  _ * wath the nember for this circuit_
  Thank you for your help
  Brahim

  It is not easy to get this information here. I m afraid person here can help you with these specific things.
  Problem is also to get these components materials as separate pieces. In my opinion, you should try to buy some mainboard at low prices for this model of laptop with perhaps damage of CPU and try to make it work again.

  What you can also try is to contact Toshiba service in your country and ask for help.

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!