The user saves the problem automatic commissioning!

My problem is:
I have configured an access and a group strategy. Created by user during registration must be available to OID and the State record is prior availability.
I can let go clicking manually. How can I let it do this automatically, without human intervention?
Thank you!

Have you checked automatic backup on the process of definition of this resource. If no, check that, and try provisioning again.

Tags: Fusion Middleware

Similar Questions

  • MS Vista startup repair couldn't fix the problem automatically

    Hello

    A little history - MS Vista was trying to install updates when the delivered system running. He failed. So I rebooted and it worked very well.

    When I re-started again after using it, even once, he tried to install updates. He failed. So I rebooted and it worked fine again. I went through the whole process several times in recent weeks.

    Then the other day, I got this screen start that says "Windows cannot repair this computer automatically. Since then, I can't get the computer started.

    The details of the problem are shown as:
    Problem event name: StartupRepairV2
    Signature of the problem 01: AutoFailover
    Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
    03:6 problem signature
    Signature of the 04:524296 problem
    Signature of the problem 05: CorruptFile
    Signature of the problem 06: CorruptFile
    Signature of the 07:3221225624 problem
    Signature problem 08:3
    Signature of the problem 09: WrpRepair
    Signature of the 10:10 problem
    OS version: 6.0.6000.2.0.0.256.1
    Locale ID: 1033

    In addition, all tests have been completed successfully, with the same error code = 0x0

    First cause is to the states that "Startup Repair tried several times but still not determine the cause of the problem."

    If I have to re - install the operating system again... I was not given a CDROM as a HP laptop... How can I actually re - install, when I do not have the CDROM?

    Also, I have some very important folders on the hard drive and I want to recover the files first before reinstalling the operating system...

    Any advice on how I can get before I have to destroy it by reinstalling the operating system would be greatly appreciated.

    Thanks to you all.

    As you don't have a Vista DVD, try this:

    Download the ISO on the provided link and do a repair of the disc.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    For recovery disk/s and/or the use of the recovery Partition:

    http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=au

    Online 24/7 support for home and individual HP products

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

    They will tell you how to do this.

    Every computer manufacturer has their way of doing recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • Wil Windows 7 does not start and is not able to solve the problem

    Hello

    I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

    When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

    I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
    At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

    Thank you

    > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

    This is a typical symptom for a faulty HARD drive.
    I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

    > At some point, the screen showed that there is a cable that is not connected or something.
    Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
    This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

    In my opinion, you need to change the HARD drive.
    I think this should solve the problem.

  • Save the file automatically in a default folder

    Hello

    I have a problem with the selection of a default directory to save the file (write on the worksheet). I want WriteToSpreadsheet automatically as a NEW FILE without inviting the user to click on the Ok button every time on "save file as" dialog box.

    Please find the attached photo to find the code.

    Analogy: I just want the program automatically save the file with a new file name each loop without pop up a dialog to the user to confirm the action.

    Thank you!

    Aerts

    Well, you already have the constant where he must go by default data.  You can just use it.

    Another option would be to create a Subvi to only call the file dialog box when the first call and record the path of the folder in feedback.  Then the selected folder has only one in need first.

    Probably the best option would be to have the user to select the folder where the program for the first time and this way through the while loop.

  • inadvertently omitted the box "stay signed in on" checked. Now, my user name always appears automatically. Don't want him! Also want to leave that box unchecked unavailability

    Using FF; Windows 7:
    (1) I'm NOT tech-oriented and I indavertently left the box "stay signed in on" checked. Now my user name always appears automatically and I don't want him, but I can't find how to fix it ANYWHERE.
    (2) how can I keep that box "stay signed in on" disabled permanently.
    (3) before coming to this page, there is a page that asked me my e-mail address, etc.. He said that the email was already in use. No kidding; This is me. He was trying to create a new account, so I finally just used another email address & implemented a new.

    A detail as a website to remember you (automatically log you) is stored in a cookie.

    You can use these steps to make a Web site recognize and remember you:

    • Create a cookie 'allow' except to keep these cookies, in particular in the case of secure websites and when the cookies expire when Firefox is closed.
    • Tools > Options > privacy > "Use the custom settings for history" > Cookies: Exceptions

    You can delete cookies for a Web site to make the site forget about you.
    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  • When I go to close Firefow he don't ask me to save my tabs. I already tried the online help and it does not solve the problem

    I have a few tabs open and made a few edits not related to Firefox so I have to restart my computer. When I go to for closing of Firefox it asks me if I want to save my tabs. I know that I can change my settings to just have my tabs open when the computer reboots, but I would like to just for the problem is solved, so everything is back to normal.

    • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
    • To view all the history settings, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
    • Uncheck the box: [] "automatically start Firefox in a private browsing session.

    You can reset the preferences of warning on the subject: the configuration via the context menu page.

    browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart

    To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.

    If you see a warning then you can confirm that you want to access this page.

  • The problem with Windows update - automatic updates service won't start not (error 126)

    original title: the problem with Windows update

    Please help me to get Windows Update operational return.

    XP Media Center Edition, Version 2002, SP3

    Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
    http://support.Microsoft.com/kb/931852

    Seems to have cleared the error message.  So far so good.

    However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

    I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

    I already followed several instructions on this subject:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

    In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

    I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

    Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

    [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

    [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

    [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

    [4A]... is there a possibility that some of [my data are] infected?

    [4] preventing me from simply infect the whole PC again?

    A1. Yes, and it was my recommendation in August, too.

    A2. Yes.

    A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

    A4a. Yes, a real possibility.

    A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

    If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

    If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

    Once again, good luck!

  • Some users of the problems to repaint after the 1.6.0_29 JRE

    I was unable to nail the determinant here - but we had several update their Java users moved to 1.6.0_29 after being invited by the automatic updater.

    For some, it's painless and just kept the work as expected with both Java applets that we use - however, for the other one of our applets began to exhibit repaint issues usually following a Javascript instantiated update.

    For computers that have the problem, it's easy enough to reproduce (so far, they have all be Win7) - but on others after reboot - or do a Java full uninstall (all versions) and a reinstall of 1.6.0_29 just the problem disappeared and applets are returned to work.

    The applet in question is a tree control that synchronizes the choice of the tree to what is projected in a substructure. A timer periodically checks whether the location of executives has changed and if it's a public call on the cmdlet to update the selection.

    The applet is not signed (and signing it did not help) - and the code works very well for years (we kept up to 1.1 compatibility until earlier this year).

    I begin to see more and more manifest: database drivers and now some relating to changes to the works of LiveScript. Given what I read these threads seem to suggest he should simply be broken-, but as it has resolved itself on a number of systems (including mine) - it feels a lot more something didn't you re-register correctly - or is damaged.

    There are no errors in the Java console.

    Any ideas? -is a known issue that I've missed?

    Thank you

    Adam

    Great to hear. 6u30 moments was just out there to oracle.com and will soon be published on java.com. A number of bugs in 6u30 were set to respond to repaint and related issues. Vs Setup offline online should have no bearing on this question. If you see that there is a different behavior between the online and offline, please let us know.

    http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

    -Roger

    Edition - updated the URL

  • ViewStack problem: automatically change the index

    Hello

    I have a weird problem with a viewstack. The viewstack is used as a container to load modules. Navigation is done by a Tabbar on the bottom. It is very similar to a Windows-style taskbar at the bottom and the modules are loaded in the viewstack of applications. Although there is an application inside the viewstack that everything works correctly. The problem arises when there are 2 or more loaded applications. Once you hover over a component interactive user (as a DataGroup, tree, etc.) in one of the first viewstacks it automatically changes the selectedIndex property of the viewstack until the last point.

    Unfortunately the project is large enough and will not be published yet, is not possible to view an example. (Well, I didn t try to re-create the problem in a smaller example either.)

    After searching for a while, I decided to put the problem here. I'd appreciate any help.

    Is there a way to remove a viewstack and no valueCommit event allow only initiated by the user change events? Only a wild guess for a possible solution.

    Thanks in advance

    Here's an idea which is to extend ViewStack:

    private var _myValue:int = - 1;

    public void workaroundSetSelectedIndex(value:int)

    {

    _myValue = value;

    this.selectedIndex = _myValue;

    }

    override public function set selectedIndex(value:int):void

    {

    If (value == _myValue)

    {

    super.selectedIndex = value;

    }

    }

  • Variables of the user on the problem of the entity

    Hello

    I need to put in place 2 user for the entity dimension variables. When I used to have a user could simply choose the value for the variable.
    When I added another variable for the entity and the user wants to open a form that uses this variable, it must first choose the value of preferences.

    This is where the problem comes. He selects the values for the two of them and when click Save then an error: 'Error on page' (in Solution Explorer) appears and it does not record the values.

    I thought it's because IE. I tried in IE7, IE8 and IE6, as well as with Mozilla. The same thing over and over again. But when you try this as admin I get no problem and set values is no problem.

    Help, please

    Thank you very much

    Hello

    This error occurs if you go directly to planning and not by the workspace?
    If there anything in the planning of the newspaper (if you're on windows) \hyperion\logs\services\HyS9Planning-sysout.log

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

    Hey everybody,

    Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

    Thank you

    Bill

    Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.

  • my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

    my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

    Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

  • HP Deskjet 6988: The problem is how to get to 'double-sided automatically' with 10 WIN my HP Deskjet 6988 printer

    My Deskjet 6988 has been printing double-sided automatically (I have the setting of appropriate material) for the last 3 years. However, when I upgraded to Windows 10, who have enough work. No pilot is available online (HP site) and the disc that came with my printer does not work with Windows 10. Does anyone know a solution to this problem? Really, I love my printer and do not think I should buy a new printer for automatic two-sided printing.

    On Windows systems, the function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

    • For the instance of the printer in question, bring up the printer properties dialogue.
    • Select the device settings tab.
    • Make sure the duplex unit is set to installed and not installed.

    You will probably need to be logged in with administrator credentials in order to change the settings of the device.

    If your model does not have a duplex unit equipped (i.e. not one of the models with a suffix "d"), then you can't do automatic duplexing. You can do manual duplex printing (assuming that the printer driver supports this).

  • I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

    I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

    Replace your hard drive.

    You have a backup of trust? If not, buy a disc of exterrnal for that as well.

    The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

  • Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

    How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

    Hi Joseph,.

    1 are you always face the question or the issue are already fixed?

    2 Windows operating system you are using?

    If you still experience the problem, you can follow this link completely and check if the problem persists.

    In the Windows wireless network connection problems

    You can also read the following article and check.

    How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

Maybe you are looking for