The workspace controls stuck off the screen

Similar Questions

• Windows Vista - stuck on logging off the screen

  I have this same problem with Vista Home Premium that others have had.  When I tried to shut down the computer laptop last night, he is stuck at logging off-page - with the active circle always renewable.  After 20 minutes or so I was tired so close by using the power button.  This morning when I turned on the laptop, he went to the same page of disconnection. 3 hours later, it's still there!  My technical knowledge is, to say the least, "limited."  I tried to open safe restart mode and pressing F8, as suggested on other threads, but which didn't work - I can not go beyond the logging off the screen. How can I solve this?

  I had the same problem... This method works.

  Turn on the computer and when the screen shows recovery Windows press the space key.

  You will be presented with 2 options - either to continue with system resume or to remove the Hibernation file and start with primer system - choose the second option - you're fixed!

• Weather gadget stuck off the screen

  I installed Vista to Windows 7 on my Dell laptop. The Weather Channel gadget is stuck off the screen, with only a small part visible. I can't move it, but I can open it from the small arrow is the only thing that I can see. How can I take off it to move on the desktop?

  Hello Smarski,

  I don't know what you see for the arrow. I installed the Weather Channel widget and find the normal buttons, including relatives, gadget drag more big size, Options. Try to right-click on it and using the menu shortcut or select move and move the gadget, or select close and then open again to place it in the default location on the desktop.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stuck on the screen "Please wait" or "Configuring windows. Do not turn off your computer.

  I'm under 64-bit Windows 8

  Apparently, I scanned my system with a complete analysis of the system (AVAST) and my computer left thinking that it would take several hours. When I came back, my computer automatically shut down because it was left idle for about 4 hours. I don't know if the scan is finished. When I try to start, the screen becomes screen stuck on "Please wait" or "windows setup. Do not turn off your computer.

  I already tried to go on the System Recovery Options screen, then will solve the problems, then Advanced Options, but I tried everything what it and the problem persists even when I tried to start in safe mode. I tried to go to the command prompt, and then type sfc / scannow, but he says he cannot parse now. I also tried chkdsk / R, but it said the same thing. I don't know how to run cmd as administrator from the System Recovery Options.

  So now I tried to use system restore, but I'm stuck on the logo of windows for about 1 and a half hour. I don't know if I have to wait for it or it is already blocked. In other forums I've read, they were using only the Group of drive 'C:' connected with system restore. Should I do this?

  I think to delete AVAST or turn it off somehow.

  Please help me.

  Problem solved

  I would like to share how I solved the problem. I was able to start using the windows 8 cd and in the window that asks you the language of the windows 8 needs to be installed, you can see below "computer repair".

  After clicking on it, it automatically prompts me for advanced boot parameters. First I tried the auto repair, but it says the same thing, '.. '. can't fix right now... »
  So I tried the option "pc refresh. I waited a few minutes to cool to do and after the process, it is more hung please wait screen when starting.

  Once connected, I installed programs have been removed. In the local disk files, there is a new "windows.old folder ' showing all programs that I have the old system. Re-install program is easy and the best thing is that I have my computer back.

  My deep gratitude to those who helped me. Thank you!

• The effect of ICT controls runs off the screen and the chronology of control carried out does not follow

  I'm working on a video where I need to change the image very close key pairs. But it seems that ICT is running off the screen and does not follow along as the ICT in the project timeline.

  How can I make the effect controls, ICT and the timeline synch upward? I can use previous and next keyframes, but the view of the timeline does not follow along. He made the process quite slow editing because I have to constantly to the scroll box allows to adjust the view manually.

  There is no option for this scroll.  You will need to zoom out.

• The camera app stuck and camera screen is off.

  Original title: using the camera in windows application 8

  I took a video of 4 seconds with the video camera app and now the screen is stuck in 4 seconds at the bottom of the screen and the camera is not turned on. There is no arrow on the right or left side of the screen to access the video either. Please tell me how this erase and start over. Thank you very much.

  Hello

  All other applications work properly on the PC?

  If the camera app is still stuck, then I suggest you to complete the application process camera from the Task Manager.

  a. from the desktop, right-click on the taskbar and choose Task Manager.

  b b.. now, on the process tab, select camera and click on end task.

  Please note: the camera app can stay or come slowly if you have just started Windows, or have simply picked up the PC from sleep. If the PC performs a large amount of background processes, as it does when the start or resumption of his sleep, this will affect the performance of the camera application. The app must iron out and improve performance in a short period of time, when there is less background running processes.

  You can run the Troubleshooter of Apps.  This tool can automatically identify and fix problems with the applications.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Can the workspace of Photoshop CS6/interface be resized when the bottom is bleeding off the screen?

  I realize that this is perhaps a silly question...

  The cs6 window-space to work/interface can be shortened in height when the lower corners cannot be seized?  The top of the interface is at the top of the computer screen.  I can't drag the interface to the top above.  Y at - it a keyboard shortcut?  I tried searching forums and websites and impossible to find a solution.

  Too bad.  It just click button at top left and resizes window on the screen.  Pretty obvious.

• Trackpad of MacBook Pro gets stuck and the screen freezes with pink and yellow lines

  So I'm really frustrated. I got my Macbook pro less than a year ago and Ive already had to get a bunch of replaced parts. I got my computer fixed as 3-4 weeks ago and they had to replace a lot of things (can't remember not what it was, but they had to remove all of the computer and replace some things that have been associated with the battery power /). Recently my computer did this weird thing where the screen freezes and pixelated pink and yellow lines will take right on the screen. In addition, the trackpad will be just stuck and I have to turn off my computer and turn it back on so that everything works. Someone at - he heard about something like that? I thought that maybe when I had my computer repaired they didn't replace not all properly? I did a check of the hardware on my computer (self-control an Apple recommended prior to an appointment at the Genius Bar) and he said that everything was going well. This poll looks like a hardware problem? Could this be a virus? Someone hack into my computer? I don't know, I'm just worried and frustrated :/

  Thank you!

  Photographing display abnormalities and make an appointment at an Apple store genius bar.  You are still in the warranty period and you have the properly repaired MBP.

  Ciao

• power off after freezing of the screen

  any help is appreciated greatly. while cleaning my closet dell b110, the screen froze, cursor movement lie, mousee light went out, ctrl alt esc, nothing helped, could turn off, so I killed the power. end waited 15 min, then powerded. things seemed ok loadup, but noticed the programs does not normally. I restored back to two days, but still not right. any suggestions?

  Content from another thread related to this topic:

  relitive to my question posted a few minutes ago, when I ran my cclearner, he won at 23% on cookies or the trash. really need help ;>)

  I can't understand how a clean boot will help you, but don't give the idea of 'expert' Microsoft Support engineer a shot if that's your desire.

  If that you have on your system without stop stop OK, sometimes this can cause corruption in the filesystem NT (NTFS).

  If it was me, I could run a check disk with error correction and see what it finds / corrections.  If there is nothing to do, then you have another problem, but I would start with this first.

  Click Start, run and enter in the box:

  Chkdsk /r

  Click OK and answer in the affirmative to the question about running chkdsk at the next system startup, and then restart the system and chkdsk runs.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  When chkdsk runs automatically restart, the results appear in the case where the watcher Application
  Newspaper.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:
  Checking file system on C:
  The type of the file system is NTFS.

  A disk check has been programmed.
  Windows will now check the disk.

  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  25151976 KB in 78653 files.
  48256 KB in 10264 index.
  0 KB in bad sectors.
  237080 KB in use by the system.
  65536 KB occupied by the log file.
  13632736 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  3408184 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  I prefer to run chkdsk /r from the XP Recovery Console so you can see what he does.

  You have a genuine XP bootable installation CD or you want to know how to make a bootable CD of XP (no XP media required) Recovery Console to run chkdsk /r from there?

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Still sign stuck to the left side of the screen / won't move

  Hello, my group is stuck in the left part of the screen and I can't figure out how to set the panels on the default settings.

  I tried clicking on window > workspace window > default but not luck

  I also tried deleting the pref again.

  Any thoughts?

  [IMG] http://i48.Tinypic.com/dwpger.PNG [/IMG]

  The fixed. I reactivated "mirroring" the monitor icon in the top right and then again adjusted a bit to the right, then turned off it back and now it works!

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!

• With windows 7, any display (Start button, label of the file on the toolbar) moved off the screen to the left and to the right there is a black margin. How to fix?

  If I reduce the resolution, all will be displayed but smaller. I would like to keep full resolution, but back off the screen to the right. It happened all of a sudden without any modification of the navigation by me.

  Fixed, maybe the symptoms. I changed the display size of 150 to 125% in control panel - display, and the situation rectified itself. Time will tell if the fix is robust. Thank you. d

• Is there a way to control how information is loaded at the screen to stop the scrolling of screen and slow display response?

  I have two monitors (ATI Radeon bi-ecrans graphics card). The two monitors are identical Dell FS monitors. #2 load monitor views slowly and scrolls to the bottom of the screen. Monitor 1 loads quickly and does not scroll to the bottom of the screen. How can I get the slow one (#2) to behave like that fast (#1). Is there a setting in FireFox that controls how the information is uploaded to the adjustable monitor?

  Hi, sorry for this rant Doctordarryl independent.

  I don't think that Firefox is aware of your monitors in a way that would result in the page automatically scroll (or load faster or slower).

  Some users have identified problems on computers with switchable graphics (i.e., the computer can automatically switch between the graphics card Intel and ATI graphics card) which are solved by turning off the power so that Windows always uses the dedicated graphics card. You have this option?

• Presentation starts 5 "on the left side of the screen and shoot intellegence off-screen to the right.

  The top of my screen is normal: starts the toolbar 'File, Edit... '.

  The body of the screen during execution of Firefox - and as I type this message - is full of lite. The actual data: starting at the top of this page: "Firefox Help...". Request a new... ' etc. starts 5 1/4 in from the left of the page.

  It's as if Firefox had a larger page with the presentation moved to the right. This pushes the last normal, 5 "of the presentation off the screen.

  The end of the rite of the bar that starts with: http://www.mozilla.com/en-US/firefox/fx/

  is out of the page, for the facilities at the end of the rite are lost.

  Any presentation, including Amazon.com and Youtube.com are similarly pushed to the side of the rite of the 5 '' screen.

  I have no access to the rite more 5 "of any internet presentation.

  The sliders that up and down the presentation and the left / rite are off the screen.

  I shrunk the screen down so small, I can barely see the numbers: control panel\ display-settings-1920 by 1200. This gives the ILLUSION of the presentation, but still no centering sliders. With this setting, I can see the entire width of the Amazon. YouTube appears centered, with 4 1/4 "on both left and rite, but no edge sliders.

  I dropped the 'setting' of 1440 x 900.

  Lost about 3 "on the side of the Amazon rite; barely on the edge of the rite of Youtube.

  No local programming has a problem: Excel, photos, videos, Word, even Internet Explorer goes full page and centered.

  I uninstalled Firefox and downloaded fresh. He asked me to restart my computer, so I did not.

  I can provide photos (screenshots) of this phenomenon on request.

  -Open Firefox-> at the Menu help-> select "restart with disabled modules.

  Firefox closes, then it will open with Firefox comes from base. You can activate the Add-ons later. Check if its working.

• the 5s iPhone camera is still stuck in black screen after upgrading to iOS 9.2 still frozen just like with iOS 9.1

  I updated my iphone to iOS 9.1 5s, but the camera does not work, most of the time that it was stuck on the black screen. I read in a forum as there are a lot of users affected by the present. "Waited for the iOS 9.2, hoping that it will fix the bug. Finally iOS 9.2 has been launched. Happy to download it thinking that it is the answer to the question of the camera. For a while camera works perfectly, but after 2 days, it was stuck at the black screen forever. It worsen the problem of camera. Hoping someone can help me to fix my phone's camera. Thank you in advance.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/