Similar Questions

• is the XBR-65X850A a model 2013 or 2014 and it will support netflix 4 k?

  I was wondering if the XBR-65X850A is a model 2013 or 2014 and it will support netflix 4 k?

  Hi kevinrocksman!

• The C400 for W530 (2447-CN4) firmware update

  I have problems with of Micron RealSSD C400 (model: C400-MTFDDAK256MAM;) Part of Lenovo number 45N8158; Firmware revision 05TD) and wanted to update the firmware to the last, but don't see any update for the player. Y at - it update underway to develop these readers of Lenovo OEM 010 G firmware? If not, is there a method to push the firmware of the sale at retail of these readers?

  Thank you.

  ~ Aaron

  Here is the link to the firmware update http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076505

• The DVD of my Tecra A3 firmware update.

  I couldn't use the update of the current firmware on my drive UJ-830 s the program tell me that the "target drive is not connected", what should I do?

  Hello

  The update of the firmware is for the UJ-831, not the UJ-830. If you don't need it for the DVD player you have.

  Willow

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• The Firmware Update (Sansa clip 2 GB) support

  While he was trying to transfer my cell phone to my Sansa Clip audiobook, I get the following error during the file transfer:

  ""It is not possible to obtain the certificate of the device. " Contact the device manufacturer for a firmware update or other measures to address this problem. » » »

  When I try to down load the latest Sansa firmware using the "Sansa Updater 1.2 ' version, I get the following error:"

  «"" The following error has occurred: cannot download the selected files.»»» Please try again later. » » »

  I currently wear farm: 1.01.11 on my Sansa Clip (2.0 GB)

  Can offer you any advice on the correction of such? A firmware update will solve the problem of certificate? Any help would be appreciated...

  DLR

  There is a message at the top of this map with instructions for a manual update. use that to update the firmware, and then in the settings menu use the format command. Try once's done it charging books.

• Thunderbolt Display Firmware update could not complete.

  Hello.

  Am myself a brand new Mac Pro recently and I'm loving it. Hooked up to my old TB screen which is unused to cause a few months the all-in-one cable is broken. Not much, I bought a cable TB, and used only to plug it in and it works fine.

  That is, until I went in the App Store and noticed a firmware update for display among all other system updated. I do not think that anything of it in time and just continued to download and install all updates in bulk. Well, after all has been said and done I got the popup saying he could not apply the on-screen since it must route the cable all-in-one to do. Not a problem, I thought, it's not that important to me it is installed. But now after whenever I restart the machine, I get the annoying popup even in my face, no matter what I try to do to remove it. I'm fine with not getting updated, I just want this bitch popup go away!

  I am a very advanced user, so I am not against the orders of terminals and/or editing plists performer or that you have to solve this problem. I don't know where to look and I thought this would be my last ditch effort fixing before you say screw it, wipe the system and start over. If no preview of this would be useful. Thank you.

  Apple doc:

  Thunderbolt Firmware Update 1.2: continues to reappear and Thunderbolt ports and target Display Mode may not work

  After the installation of Thunderbolt Firmware Update 1.2:

  • The Thunderbolt ports may not work.
  • Target display mode may not work.
  • The update can keep reappearing as available for download.

  This happens when one Thunderbolt self-powered (other than one directly connected Thunderbolt display) device is connected to a Thunderbolt port during the installation of the update. To resolve this problem:

  1. Shut down your computer.
  2. Disconnect all devices Thunderbolt.
  3. Wait for 10 seconds.
  4. If you use a Mac mini with a Thunderbolt screen, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other devices Thunderbolt at the moment.
  5. Restart your computer.
  6. If sight Firmware 1.2 update is available, download and install and restart your computer when asked. If the update of Thunderbolt is not available, the update has been successfully installed.
  7. Reconnect all devices Thunderbolt.

• Photosmart C4780: HP Photosmart C4780 Firmware Update Fail

  I downloaded the updated of the "C4700_FWUpdate_4362_HPCOM_v1" firmware, but every time I try to install the wizard says that my printer is not connected.  In fact, it is connected by USB cable and wireless.  I can print to it, printing and scanning doctor sees and checks that it is OK.  The HP Digital Imaging Monitor reports that it's OK.

  The printer is running its original software and works OK, except for the occasional low response to the control panel entries that this firmware update addresses.

  My Device Manager shows all the correct drivers OK and my control panel shows the printer OK.

  Any thoughts, please?

  You won't be able to reflash the firmware now. Looks like it is ready to be discarded. Time to buy a new printer, I'm sorry.

• NS500 FIRMWARE UPDATE WIRELESS SPEAKERS

  We have two NS500 wireless speakers, so we cannot update the new firrmare, I followed all the instructions, but the President cannot identify this new firmware update, I had to reset the configuration and again to synchronize the speaker with the wireless network but the speaker can not detect the firmware update.

  Please help me.

  Thank you

  Thanks for your reply, I'll give you more details:
  I bouth intervene on amazon website.
  The first time when I connect speakers detected 2.01.2.0 2.01.2.04 firmware update (updated Ligth on the color green, I did the update procedure) speakers and updated the firmware.
  However, until today the speakers does not detect the new firmware 2.01.2.16 . Please let me to know a fix to this problem. Thank you very much.

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7

  After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.

  It was the update of the firmware with certainty that has made this... no doubt about it:

  • My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
  • Before the update, everything is OK
  • After updating, my mouse mouse start jittering
  • < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz

  Restart to e TM Mo doesn't change anything.

  In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.

  Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:

  • Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
  • However, this is not the best solution... I don't want 2 SSID.

  It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.

  I also had bad experiences with OS updates lately and postpone the as much as possible.

  The problem is that I can't go back... or can I?

  Any help is welcome.

  THX

  The problem is that I can't go back... or can I?

  Of course, you can, but it may or may not help.

  Open AirPort Utility

  Click on the image of the AirPort base station

  Hold down the option key on your Mac while you click on the version number of the firmware

  A drop down menu appears

  Choose the version of the firmware you want to use

• New Firmware Update - where is the change log?

  I see that a firmware update was sent to my phone. However I can't find a change log. Where is it?

  Hello!

  HP and Microsoft has released an update (online) of the OTA for the X 3 elite on October 25, 2016. The update installs Windows Mobile 10 for the following versions:

  Firmware revision: 0002.0000.0014.0100

  Build of the OS: 10.0.14393.321

  Bootloader Version: 520101

  New features:

  Area	Description
  Display	High brightness Mode is activated when the brightness adjustment is suggested by default.
  Security	Reset functionality is enabled. However, the existing user must reflash phone with this software with Windows Device Recovery Tool (WDRT).

  The issues addressed (Items with * are fixed by OS updates):

  Area	Description
  Apps	App Instagram, have green lines during use is fixed.
  	Launch of view inconsistent HP on docking tools is fixed.
  Audio	Detection of the helmet is not reliable is fixed.
  Camera	Auto focus performance and stability in low light conditions are improved.
  	Model tapes preview screen is fixed.
  	Video recording after that tap put in pause/resume many times received message 'something went wrong' is fixed.
  Security	Blue BitLocker Recovery screen on reboot with active device encryption is fixed.
  User interface	Tap to wake up the wrong feature turn off screen is fixed.
  Hello Windows	IRIS is unblock, followed by sweeping to unlock quickly led to the prompt error is fixed.
  	Fingerprints and Iris being setup one after the other, one of them will not functional, is fixed. **

  Known issues:

  Area	Description
  Apps	Skype for business app can be run from external display of Continuum.
  Connectivity	Dock desktop LAN port of HP has no configuration of the user interface.
  User interface	Missing tiles with update settings. The user can go to the list of applications, press the settings icon and select PIN to start restoring the tile.
  	Tile 2 Messaging becomes white with update. Touch on the tile once it restores.
  Security	Too many failed unlock attempts, the device will be blocked for security reasons. User can unlock the unit to https://account.microsoft.com/devices.

  Thank you

• Satellite Pro A200 error (PSAE4E) during the firmware update Disc Creator

  Hello

  I get the following errors when you try to update firmware for Disc Creator I use Windows VIsta Home Premium.

  An unexpected error has occurred.
  Error code: 32007C-26-00000015

  Followed by:
  Error code: 320129-26-00000015 - then application goes down.

  All solutions to this
  Thank you

  Hi guys

  I'm a bit confused of m.

  > when you try to update firmware for Disc Creator
  Where did you get the firmware update for Toshiba Disc Creator?

  I checked the page European driver Toshiba and Satellite Pro A200 (PSAE4E) download area and, unfortunately, I didn t find updates for Toshiba Disc Creator.

  So I really wonder about this problem. He s strange

• Toshiba 40SL980G - the Youtube app after the firmware update.

  Hello

  So today, I've updated the firmware of my TV (40SL980G) and after the update of the youtube app is missing and also the social place of Toshiba places is not accessible.

  I did reset TV after the update.
  I checked the firmware download page, but this model is not which are listed there.

  Someone here could help me on how to solve this problem I would really appreciate it.

  They are probably going to change something in the places of Toshiba.

  If a new firmware update is available, try to install the latest version.
  Otherwise I recommend the service Toshiba Places in the next few days again.

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi