Thermal compound HP G61

Similar Questions

• CQ60-212EA (buffer thermal or thermal shim copper)

  Hi, I have a Compaq CQ60-212EA, and I read the user guide, but in the page 4-43 are not written specifications of the heatfrom the GPU (NVIDIA chipset)pad .

  I need to replace the thermal pad ('LIGHT BLUE' - on my laptop) because it is very old, I want to update this laptop.

  The most important specification of the thermal or thermal buffer in copper shim's thickness.

  I sawdifferent thickness (0. 3 mm, 0. 5 mm, 0. 6 mm 0 8 mm 1 mm 1. 2 mm, 1. 5 mm 1. 8 mm 2 mm 2.) TR 5 mm 3 mm) and sizes (15x15mm, 20x20mm)

  Can you help me to know the right size/thickness of this thermal buffer?

  I was wondering if I could just use thermal paste Arctic Cooling MX-4 instead of buy new thermal pads or the thermal copper wedges?

  Thank you!

  I've successfully replaced my AMD Sempron if-40 for an AMD Turion, model: RM-72, which is a Dual core 2.1 Ghz cpu.

  I used the thermal paste Arctic Cooling MX-4 for the processor and a copper thermal shim (thickness: 1 mm; size: 15 x 15 mm) with the thermal compound for GPU chipset.

  Thank you

• Laptop thermal overheating found the Trojan

  My laptop 2000-41OUS began to close with a thermal overheating BIOS message. It sounded as it was put to the test, running loudly. I've learned to control programs and of course, many have been installed I have no download. I removed them and still close. Finally found a Trojan and cleaned to Symantec. The race so sweetly now I can't hear it. I'm afraid that overheating may have damaged the fat layer that protects him. I should take it to a computer shop and what should they do?

  Hello CatLoraine,

  I can certainly understand your concern. There is usually no need to redo the thermal compound, thermal paste or a poorly mounted radiator is the culprit for overheating. If the laptop isn't overheating now so I wouldn't worry on this subject.

  You can monitor the CPU to increase temperature while using it to see where it is located in HWMonitor is a good and free to use. Install only the Bit version for your system (32 or 64-bit) http://www.hwinfo.com/download.php

  This way you will have a good idea how hot it is actually done.

  But if it makes feel you better, you can certainly take it to a technician looking at him.

  Really, I would be more concerned by what you have found the infection that caused the overheating.

  Honestly, realize that using the malware removal software can not 100% guaranteed a clean system nor can it correct any damage was left of malware. Especially if you are not known in the removal of malware.

  If its possible, I would consider reloading Windows in the factory for a peace of mind.  And to all least, recovery disks has not been burned yet, if now.

• Should I apply more thermal paste?

  I got a new Dell heatsink for my desktop Studio XPS 9100 (i7 960 processor).  The new heatsink came with a thin layer of fresh thermal paste, completely covering the surface of circular contact.  The new thermal compound was protected by a green plastic above the contact area Cap. I had already bought a tube of Arctic Silver 5.  I must:
  1. install the new heatsink without adding any money Arctic to the CPU as the contact on the heat sink surface is covered? or,
  2. Add a vertical line of the Arctic Silver 5 to the CPU, and then install? or,
  3. remove the factory thermal paste and aim Arctic Silver 5 the heatsink from the CPU to avoid the mixing of the two types of paste?
  I'm leaning towards alternative #1 since I guess that Dell is familiar with this paste to apply and how to apply.  Any ideas?

  I'd go with #1 too.

  Probably, you want to clean the old thermal paste on top of the processor before installing the new heat sink, but do not remove CPU in its socket.

  You can google for various methods remove the old thermal paste. If you use a solvent (e.g. isopropyl alcohol), do so carefully so it doesn't drip on the motherboard, or other components.

  And make sure not to touch the surface of the radiator after you remove that Green Hat.

• Mac Pro 2013 become hot, not answer and stop.

  Hello

  I have a 2013 Pro Mac, I bought as used before 5 months and he was well, before 3 days, the weather was warm (approx. 28 °) and under normal conditions, use my Mac Pro start freezing and not answered every 15-30 Minutes and automatically stop or I have to disconnect the power cable.

  I started looking on the problem, I checked the bodies of the Mac Pro and I found it very hot, the fan worked but slow, I searched on Google on a tool or a command I can do the fan faster and I found an application called SMC FanControl, this app showing me that Mac temperature of 48 ° also with this app, I was able to turn the fan to Max speed, I heard the noise of the fan, it worked perfectly with this app. The Mac Pro early to work perfectly also with in normal and hard jobs.

  

  Yesterday, I decided to clean all of my Mac Pro material, maybe that this solves the problem, it was dirty, and I did as new as you can see in this picture:

  I also used for better CPU and GPU thermal compound I found on the market.

  

  BUT the problem came with the first video editing, 48 ° c, closing down and not be able to turn it on for 5 Minutes.

  The question is: why my Mac Pro not control the fan automatically? is it a software or a hardware problem? If the material someone we know exactly?

  Best regards

  Which component was 48 c?

  What was the hottest component?

  It's not hot at all.

  From now on my MP 2013 with base CPU, CPU ITPP and CPU sensors 1-4 are about 100 ° C and speed of 84CFan two GPU time 1750

  • Record the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

  Apple cannot help you because you have disassembled the Mac.

  You already reset the SMC to take part. try resetting NVRAM/MRTP memory

  How to reset the NVRAM on your Mac - Apple Support

• Portege R500 - overheating?

  Hello

  Recently one of my colleagues has experienced problems with its Portégé R500 laptop. The display becomes either black with white text (but the image is cut and very blippy) or the screen goes black in general. The laptop is very warm to the touch when this happens and if turned off then turned on the power LED lights, but no other LEDS as HARD drive / wireless as usual.

  However, if during a few hours, it turns on the property. I decided it was overheated and was ready to RAM the machine, but when it came to me rehearsing heat / hardware failure with many stress tests the phone performed very well for hours even with 90-100% charged all the time.

  This problem would anything other than overheating itself? I don't want to RMA a machine without symptoms, but at the same time, it is inappropriate to pass back to her so she can do her job on. I already have a can of compressed air, so this isn't the venitlation / fan is defective.

  Thank you very much.

  Post edited by: oakala

  Hey Buddy,

  Theoretically, it could be an overheating problem, but it could be another problem as well. This should be checked by a technician of the laptop. It is very difficult to say what is defective, so you need professional help.

  It is good that you have already cleaned the fan using a jet of compressed air, but maybe the thermal compound must be renewed. Just ask a service provider authorized if it of necessary and if they can do it for you. :)

• Lack of screen after disassembly of the Satellite X 205 - s9349

  Well heres so what happened. My laptop was running very hot, so we took it apart and cleaned all the dust. Then, we put "artic silver 5" on the CPU and the gpu. When we got it all back together, the monitor had a tinge of purple to it.

  When we have shaken the monitor cable, the colour would change other colors like Blue tint and other shades.
  I took in this type of computer repair and it did something for her and now it looks like this:

  http://img294.imageshack.us/img294/9662/MonitorL.jpg

  I don't know what he was doing.
  Need help fixing. Thank you in advance,

  This type of repair is allowed for the Toshiba laptop repair?

  At first, I must say that laptop disassembly is not for everyone and it will be done by authorized personnel only. They do this maintenance manual step by step following with the exact description how to do this. Thermal compound/grease is not the same for all models of laptops and quantity used is also not the same. So what you did was very risky and now you have the problem. Who knows what's wrong there. In the worst cases, the graphics card is dead.

  Have you tried testing with external monitor? Please, do it and post the result.

• Satellite A200 - fan works too

  Hello

  I will present my problem briefly to you in the hope that I can find a solution.

  I work with recording music. My Satellite A200 can handle the processor high and all the rest. I'm really very happy.

  But the fan works just too well even when CPU is not used much. I installed The Ultimate Troubleshooter (excellent software) in order to eliminate unnecessary software or process. My RAM is 73% free, low 0-10% CPU and my fan speed is measured at 47 degrees Celsius. My hard drive is 33 degrees Celsius. Very low.

  The boring bit, is that my fan is behaving intermittently, but even when nothing is really happening, and the temperature is still very low. I have another laptop to compare to, which is quiet and peaceful in the other corner of the room and only takes action when I activate several operations at once. I wish my Satellite to behave in a similar way.

  I cleaned the fans today, and a lot of dust came out. But still the fan curve. I tried to take control using SpeedFan 4.43, but it does not work. I don't see anywhere in the BIOS how I could control the speed of the fan.

  I need to find a solution, ideally one that doesn't involve buying a new fan, or disassemble the computer. Since the temperature is right at all times, I guess it's just the BIOS programming for constant speed activity that must change. Any suggestions? It would be appreciated.

  All the best, Shlomi.

  Hi shlumaan_1,

  > I cleaned the fans today
  How did you do that? Did you follow the instructions?
  How to clean a Toshiba laptop cooling system?

  There are different reasons for activity high fan and dust that blocks the fan, the thermal paste should be renewed, etc..

  Fact is that the fan will be controlled automatically to protect the equipment from overheating. What you can do is chancing the cooling method in Windows power management. I put t know what operating system you use but on Vista and Windows 7, open the power management options, change the parameters of the plan, cooling method. You can change between maximum performance and battery optimized. I would recommend setting the optimised battery.

  Also, check the BIOS version. If you have an older version, probably thermal management has been changed with a new version of the BIOS. Update the BIOS that you find on the official website of Toshiba.

  Finally, and especially if your laptop probably has a few years, that the thermal compound must be renewed. This is why I would contact an authorized service provider that will apply the correct thermal grease and also the laptop must be disassembled. Not so easy

• Question about the temperature of the processor on Tecra 9000

  Hello. I would like to know what are the current temperatures for Tecra 9000 1 GHz. When I run an intensive application processor like Prime95, the temperature rises to 59 C. Isn't too much? Yes and I also recently replaced old thermal compound with AC MX-1.

  Thanks for your replies.

  Hello

  Thus, 59 c are quite OK, that they are almost under the PDT of the CPU. If the temp would be more than 70 ° C or more then it would be critical but not to 59 C. The Pentium 3 M should typically generate a higher temperature if your CPU is, comparing to another cooler system. Could be also dependent on the applied paste you´ve cooler...

  Don't worry Don t, everythings OK. :)

  See you soon

• Satellite A30-931 - what happens if the BIOS update will not?

  I was recommended to make an update of the BIOS on the above machine. I think that the existing version is 1.30 and the correct replacement is 1.70 (I think it's PSA33E: [http://support.toshiba-tro.de/tools/eula/info_eng2.asp]).

  The original BIOS has a password. Want to know what happens if this process goes wrong. My system will be unusable or is it a pre-installation of the backup procedure?

  The additional problem is that the fan is happening every minute or so. The radiator looks clean, but maybe new thermal grease should be applied to the cpu.

  Thank you

  Hello

  In the worst case if the update goes bad your computer doesn t boot. This means that you can only see a black screen and nothing you can do. In this case you would need professional assistance from an authorized service, they can reflash the ROM module or Exchange it.

  But a few important points here before starting the update:
  S ' ensure that you are logged on as administrator
  -Disable your AntiVirus and your firewall
  -Disconnect the Internet
  -Close all running programs

  > The additional problem is that the fan is happening every minute or so. The radiator looks clean, but maybe new thermal grease should be applied to the cpu.
  Yes, maybe the thermal compound must be renewed if you already cleaned your laptop. After that, everything should work normally.

• Satellite A300D - is overheating and can not play games

  Hello
  I'm quite desperate. My Satellite A300D is overheating. I can not play new games. Temperature hit 94 degrees and laptop is restarted. I cleaned it several times, very precisely and nothing. So I decided to send it to the official service of Toshiba. After that, the phone is still the same.

  My only hope is buy cooling grease and cooling stock-base. But before that ideas, advice?

  Thanks for everything...

  Hello

  I can understand you mate, but have you contacted Toshiba service center again? You should speak with the technicians and explain the situation. I put t know what they did, do you know that?

  Cleaning of the laptop is still a good idea but if it doesn't work maybe the thermal compound must be renewed. So ask a technician for help laptop.

  By the way: what OS are you using? You can use the same problem with the factory settings and preinstalled display driver?

• Satellite A350D is maybe overheating

  My A350D (ZM80 / 4 gb) is less than 1 week old, but I m concerned about his performance and I'm concerned he is tied to her heater.

  For example, whenever I run a program like Football Manager 2008 he is struggling. For the first 10-15 minutes, it is fine, then it starts to slow down at a crippling rate. This is also the case when they surf the net after 10/15 minutes. I can feel a slight breeze of aeration, but I never heard the fan turn on?

  I have the laptop has given rise to the work surface so that the fan can circulate but all without success. I think to make a cooling pad but it helps?

  Hello

  Yes, maybe the laptop is overheated but I don't know m.
  So in your case, I'll try to clean the laptop with a jet of compressed air. This could blow out the dust from the cooling fans.
  In addition, make sure that you have enough free space around the laptop to the air ventilation and don t use it on a bed or couch. You must only use it on a table.

  I hope it works, but maybe the thermal compound must be renewed, or something else, but this can be checked by a technician for laptop.

  Good bye

• Satellite A135-S4527 cooling fan works more efficiently

  Hello

  I have an A135-S4527 and the cooling fan is having issues.
  It works at low speed constantly, as it usually does, but almost never, he runs in mode high speed.
  Clearly, it must be that the air temperature is high enough... about the temperature of the exhaust gases from the typical vehicle.

  I'm worried that it will burn upwards if I have not fixed, but I don't know what needs to be fixed.
  I use a "Chill Pad" USB power under him at all times to make it work more fresh than the factory settings, but this problem has arisen only recently.

  I've owned this computer from a little less than two years now.
  5 months in the property, the HARD drive failed and had to be replaced (it goes without saying, I save ALL my important files now).

  Does anyone have information on this topic or the normal functioning of the cooling fan?
  If so, it would be greatly appreciated.

  Nick

  Hello!

  As Akuma, it could be that it takes more dust in the cooling fans or fan doesn t work properly.
  So in your case, I'll try to clean first using a jet of compressed air. This could blow out the dust from the cooling fans. You can buy it at a computer retailer.

  If it doesn't work you should sent to an authorized service provider. Technicians can check your laptop and clean.
  Maybe the thermal compound must be renewed and technicians can do for you. It of a little more difficult to disassemble a computer laptop and you need to remove a large number of screws so he sent to an ASP.

  Good bye

• No satellite C70D-B-10U no warning (power, GPU or capacitors) diet

  Hi all

  excuse the new thread, but I have not found the answers online, it's just speculation and it's for the different models.

  So I have a C70D-B-10U Windows 7 pro 64-bit. When I formatted and updated all, it just kept crashing when you try to play videos on Windows Media Player. I cleaned the inside and replace the thermal compound, even more recent drivers updated and started using VLC as my default media player. It crashed it rarely, BUT it always does when I try to start playing games (Nothing heavy - League of Legends). Laptop seems to do well with the tests of memory, without defects found.

  I read that this could be due to:

  • Faulty GPU
  • Defective battery
  • Defective power supply
  • Bad capacitors on the MOBO

  Someone at - he had a similar experience? I reinstalled Windows and it's the same story. If it's a motherboard problem, I guess it would be better to just get a new one?

  Thank you

  Update: I decided to test the RAM, and it looks like he can't handle 8GB. The 4 GB glue work on any site, but when I have it on the machine, it crashes. Don't you think it's a motherboard problem?

• Satellite P30 will not start, but shows the power on LED and fans work

  I work on a P30, radiator cleaned, the basic form of new fine thermal compounds, worked for a few hours, then turned it off and move the power LED lights, fans, cd rom works, but it is she, no display, no boot, nothing.

  Any ideas on how to solve this problem would be a great help.

  Plug

  P30
  P4 3.2 ht
  1 gig of ram, tested.
  XP pro

  Hello

  On this path, it is not easy to say what can be the problem and just inquiry may help, but from your description, I'm afraid that there are some critical material damage. It may be something wrong with the power supply (motherboard) or perhaps is the grilled CPU if you have done something wrong with the thermal paste.

  Sorry, but I think you should contact the partner customer Service in your country and check it properly.