These RAM modules will run in mode dual channel - Satellite A100?

Similar Questions

• HP-039tx: HP e039tx RAM mode dual channel

  I want to activate my RAM mode dual channel... can someone tell me the process to do this? I already checked in CPU - Z it is currently in single channel mode.

  Hello

  It's a laptop HP Pavilion 15 -e039tx? The following link shows its specifications:

  http://support.HP.com/us-en/document/c03802585

  He now has 4 GB of RAM and seemed that a single (unique) slot is corresponding to use. If you want to run double channels (two), you must add 4 GB more to the second slot. CPU - Z already tells you the specifications of the existing RAM. Now please go buy 4 GB more with the SAME type of RAM (and better SAME brand) then information from the manual next (page #53) allows to add more RAM to your computer (to make the 8 GB total)

  http://h10032.www1.HP.com/CTG/manual/c03939658

  Kind regards.

• Satellite A300 - a RAM module will not work

  Hello guys,.

  6-8 months ago, I had a terrible accident with my laptop, I spilled:(coffe là-dessus.) Initially it has worked very well, but after a few days I just couldn't start it. When I pressed the power button, 'satellite' logo turned on, I could hear the fan but the HARD drive would not start. Tryied to clean and finally he started to :)

  Then from time to time (each is approximately 40 days) it does not start and what I've found, is that the RAM slot near the motherboard has a problem. When I remove the RAM from the slot, it works very well (but with 2 GB instead of 3 GB). A few days later, I put the second RAM and reworked for the next 40 days. Even in this way, I was satisfied after what had happened (the accident of coffee).

  The problem is that the same thing happened about 1 month ago but still every time I insert the second RAM I get the black screen, fan works and nothing more (with 1 memory it still works). Is it possible that the slot 2 is now dead, after 6 months of a semi-travail condition? Do you know how to clean it? or do something else?

  I changed the 2 RAM in both slots and I'm sure that the work of two Ram.

  Thank you and I would appreciate your help as I am a student and I use a lot of Matlab (it takes forever with only 2 GB of RAM)

  Post edited by: creative1

  Hi creative1,.

  I think that it s not easy to say which is the main reason for this problem. Theoretically, it could be caused by the coffee that you reversed but it could also be another reason. In my view, that such a precise diagnosis can be done from an authorized service provider.

  The memory modules that you are using? Two of the ASP and pre-tested modules?

  Modules of RAM, you can test with special software of diagnosis than Memtest86. If the RAM modules are faulty, Memtest86 should acknowledge mistakes. It would be interesting to try.

  In the worst cases, the second location of memory is faulty. If the bars of memory work in the first place it seems to be the case :(

• These ram cards will work with my hp pavilion a1700n PC

  I bought a set of ram cards and they do not work with my pc. I just want to make sure that these maps will work before I buy them my pc specs here is http://support.hp.com/us-en/document/c00820191 cards are off to ebay here http://www.ebay.com/itm/190687891922?ssPageName=STRK:MEWAX:IT & _trksid = p3984.m1438.l2649 #ht_2222wt_93... I think they will, but I just want to be sure they will thank you first.

  According to the specs, it seems that PNY memory referenced in your post should work. Your motherboard accepts up to 4 x 1 GB PC2-4200 or PC2-5300 240pin DIMM and the PNY DIMM are 2 x 1 GB PC2-5300, 240pin.

  Frank

• a macbook with ram 667 will run 1330 ram

  My dad has an older Macbook (white) with 2 GB of 667 RAM.  I have 2@2gb 1330 RAM and I was wondering if I could update / update its Macbook and operate?

  It will not work.

• Setting the mode BIOS LBA - Satellite A100 - 011 PSAARE

  I have the tool 'EASEUS Partition manager', and when I start this tool, I have an error message "Manager Easeus partition detected an error on the disk 1" "start LBA value partition xxxxxxxxxxxxxxxxx is invalid". "." Using the tool says:
  --------
  Change the BIOS LBA mode setting

  CAUTION: Never change the LBA mode in the BIOS of your system once the data are present on any hard disk. Changing this setting can cause loss and alteration of the data.
  More modern designs of BIOS system supports LBA or Logical Block Addressing. The LBA mode no definition, no matter enabled on your system, or not, determines how your computer translates logical addresses cylinder-head-sector (CHS). If you change this setting, shift resulting in the CHS values may corrupt the files and partitions on your hard disks.

  If you must change the setting of the LBA mode in the BIOS of your system, first back up the data on your hard drives. Contact the BIOS and/or support services of the drive manufacturer to make sure that understand how to proceed safely.
  -----
  Can someone help me?

  Thank you very much

  Hello

  The LBA can be enabled in the registry of the Windows XP operating system!
  Microsoft has released the paper support and the guide line;
  http://support.Microsoft.com/kb/303013

  The LBA allows a computer treat a disk HARD more than 528 megabytes.
  Logical block addressing is one of the defining features of the IDE improved HARD drive interface.

  If you wish, you can read some details here:
  Logical Block Addressing (LBA) defined
  http://support.Microsoft.com/kb/q122052/

• What Ram modules are used in the Satellite Pro L870 18R

  HYA

  I m new to this forum so apologies if I posted in the wrong place.
  I just bought a Sat Pro L870 18R for my wife as a Christmas pressy.
  Before she gets to him I was going to increase the Ram of 4 GB to 8 GB.

  I know he has a single stick of ddr3 1600 Mhz in it, but without opening it you know which manufacturer to use Ram Tosh for this machine?

  I like to keep the same manufacturer.
  If I can at least give him a chance to run dual channel. I know I couldn't just take part and look like I m going to have to open it to adapt to the new ram anyway.

  I just i didn t want to keep o he packing and unpacking, and opening and closing upward are a gift after all lol.

  Any help appreciated thnk

  Above all the RAM brand is very important to get the RAM running in dual channel.
  It is important that the two RAM modules will support the same features.

  As far as I know the unit was equipped with a SO-DIMM 4 GB RAM DDR3 1600 module MHz (PC3-12800). I guess the reference is: * PA3918U-1M4G *.

  Welcome them

• Dual channel mode is not enabled on the Satellite P50T-B-10V

  Hello

  I recently bought a laptop by Satellite P50T-B-10V.

  Everything works fine, but I saw in the software helped that it s not activated for 1The memory channel mode, although the chipset support this mode.

  How can I solucionate what mind?

  + Memoria driver +.
  + Type Dual Channel (128-bit).
  + Modo Activo single channel (64-bit) +.

  I hope that your answers! Thank you!

  Dual channel mode can be activated manually.
  Mode dual channel will be activated and used automatically if all of the requirements be fulfilled.

  What does that mean?
  Well, to use the two channels, you need two memory modules and both modules need to support dual channel.

  The Satellite P50T-B-10V seems to be equipped with a module of 8 GB RAM
  http://www.Toshiba.PT/laptops/satellite/satellite-P50-b/satellite-P50-b-10V/

  This is why the double channel does not appear to be used.

• Best Ram Module 8 GB DDR4 to 2133 MHZ for HP AU116TX

  Hello

  I bought HP AU116TX HP and it came with 4 GB of RAM. I want to upgrade my Ram and I think a ram slot is free and I thought to upgrade to 8 GB of Ram in this niche, but there is a big question. Which one to pick?

  I did a lot of research and crucial is off option sicnce they supported only the HP-Compaq series.

  Corsair Vengenace is an option, but I'm not sure if I can go with him and im not sure what Max MHZ laptop Ram is supported. CAN someone help me.  Also, I couldn't find Vengenace with 2133 MHZ. research on the Internet the list only 2400 MHZ.

  Your manual:

  Manual

  See p. 35. He did 2 slots, so if you want to switch to 8 GB you only need another 4 GB module. You are certainly better with 2 identical modules because of the thing "dual channel" and 8 gigs in dual channel is generally better than 12 single channel you get with incompatible modules. She will accept the modules DDR4-2400 but downclock to 2133.

  Two locations SODIMM - customer not available/no upgradable DDR4 - 2133 Dual Channel Support (bridge of DDR4-2400 to DDR4-2133) supports up to 16 GB memory max system

  4 GB 2133 MHz 1.2V shared DDR4 820569-005

  8 GB 2133 MHz 1.2V shared DDR4 820570-005

  https://www.Amazon.com/crucial-single-PC4-17000-SODIMM-260-pin/DP/B015HQ9SI6/ref=sr_1_9?ie=UTF8 & qid = 1476126526 & SR = 8-9 & Keywords = DDR4 - 2133% 2BSO-DIMM & th = 1

  The link above allows you to choose a 4 GB or 8 module in concert. Technically, it is supposed to be done by a technician authorized HP, incidentally.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Acer Aspire E1-570 does support RAM dual channel?

  I installed the program CPU - Z and it says that my laptop uses the RAM single-channel mode. Support dual channel mode and how to change mode dual channel?

  Felix_Aliaj,

  I don't see dual channel support listed for the memory of this system.

• Satellite A100-712: upgrade memory will void the warranty

  I have Toshiba A100-712. I plan to replace my 2 x 512 MB DDR2 533 in Kingmax DDR2 2x1GB. What about the warrany? I don't want to lose him... If someone knows something about this I feel grateful for help...

  No, certainly not!

  If you wish, you can upgrade the memory on the Satellite A100-712 and the guarantee will be available!

  These RAM modules must be compatible:

  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Greetings

• Satellite A100 - 049 (PSAARE) - what is the maximum RAM capacity?

  Hello

  Does anyone know what the maximum memory, it's that I can integrate my laptop? I was hoping that change maps of 2 x 1 GB 2 x 2 GB cards which gives me a total of 4 GB of RAM

  Regards lee

  Hello

  The Satellite A100, which belongs to the PSAARE series can be upgraded to 4 GB of RAM.

  For the upgrade, you can use the memory modules with DDR2-533 specifications.
  I have good experiences with the Kingston memory modules.

  I hope this information is useful for you.

• When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

  When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  Thank you

  Andrew

  You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369

• Satellite C70-C-199 - dual channel mode is not active for RAM modules

  Hello

  I recently bought a Satellite C70-C-199 laptop with 4 GB RAM and I installed a module of RAM 4 GB more.
  The module I installed is not recognized by the BIOS.

  What I tried:
  (1) replace the Rams repeatedly.
  (2) exchanging the two Rams between the two slots.
  (3) BIOS update to the latest version

  On the link down below, you will find some reports AIDA64 that contains details on the chipset and the two RAM modules.
  https://drive.Google.com/open?ID=0By...ndwZUZoV3lCMTQ

  Thank you for your help in advance.

  I found the problem. This laptop needs DDR3L. This means that the RAM modules operating at 1.35v. My 4 GB Kingston works only at 1.5V.

• Satellite Pro C50-A-1E4 running unstable with new RAM modules

  I have the above machine and that you have upgraded the RAM (up to 8 GB) a long while ago. Normally I have upgraded the BIOS if there is a new version.

  However, for some so that my machine was unstable, and this is due to the RAM running at the XMP1866 of the machine (933 MHz) instead of the rated CPU 1600 (800 MHz). I have attached a screengrab of Piriform Speccy to report.

  There is no 1.40 BIOS UEFI framework to adjust the RAM timing and so BIOS supports data SPD incorrectly for CPU ID.

  I'm unable to locate earlier BIOS to check if this pattern is repeated, but it took more than a year to display fault so that the machine is out of warranty. If I put small sticks of RAM 1600 system seems stable.

  However, I bought the RAM to use. Now I am unable to test if RAM is faulty because she will not pass Memtest (blocking or crash on) but I'm not sure if instability of the system is defective cause of system being OC because of the BIOS or RAM.

  The question that he is perfectly for about a year before displaying the errors. BIOS should correctly detect the speed of JEDEC standard data in the EEPROM. He does not. I often ran "overspec' memory in other PC without encountering this behavior. It is only troubleshooting that made me aware of this gap.

  RAM is Crucial Ballistix 8 GB-1866 BLS8G3N18AES4CEU.16FE

  If I put small sticks of RAM 1600 system seems stable.

  I doubt that it is a BIOS problem...
  First of all, you can not use any module of RAM... you must use a fully compatible modules and as you probably know, not all commercially available RAM modules are fully compatible.

  As far as I know if upgrading RAM that Toshiba recommends the use of these modules.

  4 GB DDR3 - 1600 PA5037U-1M4G
  8 GB DDR3-1600 PA5037U-1M8G

  The specifications are:
  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8GB
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Rank: Rank double
  Latency (CL) CASES: CL11
  Voltage: 1.5V

  I recommend you use the modules that meet exactly the same specifications.