HP Officejet 7000 Wide Format print black lines on photos

Similar Questions

• HP Officejet 7000 Wide Format: HP Officejet 7000 Wide Format Printer - E809a - loss of connection through router

  We have a problem get sustained response of our HP Officejet 7000 Wide Format Printer - E809a which is connected to the network wireless ethernet to a router Netgear cable.  We tried stripping on the software driver & uninstall of the printer of the registry, and then re-setup from latest downloads from the HP site.  It works, especially if the device is set as the default printer, but the printer greys out less than an hour in the device registry and the default value automatically resets to another printer.  Does anyone know why this printer loses his connection?

  Hi @Harry64,

  I see by your post that continues to change the default printer. I'd love to help you.

  Disable the SMTP setting in print, to see drivers if this will help.

  Devices and printers, click with the right button on the printer and click on printer properties, click the Ports tab, select Configure the Port, clear the SMTP check box and the printer should display online.

  If the problem persists, please take a look at this document. Monofunctional and HP Printers Multifunction - "the printer is offline" Message appears on the computer and the printer does not print: Windows 7

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• OfficeJet 7000 Wide Format pri: HP Officejet 7000 Wide format printer will not print black ink

  I'm looking for a solution fix what is an occasional problem with our Officejet 7000 and arose once again today. The printer will print any black ink. I did the procedure to print alignment and cleaning print head as well.  I tried to clean the evacuation on the real printer cartridge area as recommended by some responses from support group.  When this has happened, I can fix it usually wiping the area where the ink comes out of the printer cartridge, but nothing works today.  The cartridge is 3/4 full.

  Other than to throw this printer and all the ink cartridges, I bought already for later use, suggestions for what else someone could solve this problem?  There seems to be a lot of people who have posted similar problems in recent years.

  Hi @P-architect,.

  Thanks for the reply.

  The only print head is CN643A, the 6500 and 7500 HP 564 cartridges as well usage. I searched the HP Print Store and found that you really want to be looking for a KIT of REPLACEMENT FIELD HP 564, and the part number is CE001A. The replacement of the field Kit contains a set of ink which are used to set up the print head. It's not like there are none currently in stock, but it is a clickable link to resellers who may have one available.

  I hope this helps!

  Thank you.

• HP Officejet 7000 Wide Format: HP 7000 809 does not print the data

  I updated to the last version of drivers and full software (14.8.0 dated August 2014) and ran HP Scan Doctor which States product is installed correctly and all systems are ready to print, all tests are checked as well with the green arrows. I have the printer connected via USB - 6 ' cable 2 wired connection. The results after the execution of Test Pages from doctor Scan is the same no mateer I want. Test page initialled, the printer is atemtps insiders to print, momentarily stops and then sends an empty page, no data.

  My computer is a Dell 8700, channel quad 3.4 gig ram 12 GB, Nvidia videocard W/2gig Ram, drive 'C' Solid State 240 G on which is installed an OS Pro 8.1 Windows with all latest updates. The Dell system has USB 2 and 3 ports and I made sure that this printer is connected to port USB - 2 ports (USB Ports are color coded).

  I thought it was a driver problem, since I had been running the printer with Win 7 Pro last worm update o/s without any problem, but since the switch to the wire to 8.1 win that developed and that I just downloaded latest software and drivers for the moment, I'm stumped. SUGGESTIONS, thank you I use it with my CAD software for businesses.

  Welcome to the HP community @Budjet1,

  I noticed your post on the white pages of your Officejet 7000 Wide Format printer print test, even if the print and Scan Doctor shows everything to check very well with the printer. I wanted to respond to tell you about my suggestions. It may be a problem internal to the unit, or perhaps with the ink system and recommend to try the steps in the guide I posted below.

  If the test still pages print as white pages, try to contact HP to discuss a replacement for the printer.

  • HP Officejet 7000 (E809a), 7000 Special Edition (E809b) and large printers Format 7000 advantage (E809c) - solving print quality problems

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• OfficeJet 7000 wide format: cartridge Blink led an officejet 7000 wide format

  When sending test page, the printer become offline, the cartridge led is flashing one by one.

  Please suggest how to solve it.

  Hello @TripatiPrPadhi,

  I can help you with the blinking lights on your printer Officejet 7000 wide format.

  Using the paper lights flashing on the HP Officejet 7000 (E809a) I discovered that the light sequence you describe is related to the installation of the print head. To make it easier for I copied the steps suggested here for you;

  Solution 1: Check the installation of the print head

• Is there a plugin that I need to download for my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro running my program CS6 CS6?

  Is there a plugin that I need to download for my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro running my program CS6 CS6?

  update the drivers of your printer.

• my HP Officejet 7000 wide format fails to print

  The format is Windows 7.  Connected network.  All the cables and connections are solid.  Power is on and the printer seems to not work normally.

  When a print job is sent to the printer, the print head sounds as if it is printing.  However, no printing appears.  No or flashing led error messages occur on the computer or the printer. Pages through the printer completely in the output tray.  The printer is ready for the next print job.  No printing.  Any advice?  Print head died?

  Rjgreen10

  PS: I normally print in grayscale color.  I tried the color and it will print color.  May require cleaning?

  Then it is just printing blank pages?

  The link below provides details on running a clean print head...

  http://support.HP.com/us-en/document/c01758227

• Yellow not printing - officejet 7000 wide format

  
  

  Hello

  Sorry to hear that you're having trouble.

  It seems that the yellow part of the printhead has failed.

  a new print head resembles the solution

• HP officejet 7000 Wide Format: hp officejet 7000 Wide Format E809a

  Hello

  The message is: "error sistema di there."

  The printer did something I've never seen before with its ink level leds. The 4 color cartridges leds Flash one at a time with a regular sequence (from magenta to black).

  I don't know what happened. I don't know what to do to solve the problem...

  Hello to all,

  He message e: "error sistema di there."

  Stampante fa qualcosa che non ho may visto prima con i suoi led level is led there. I brought delle cartucce 4 lampeggiano una alla volta con una sequenza regolare (magenta al dal nero).

  No Yes cosa sia successo. Not if cosa fare a risolvere he problema...

  Oops.... Somehow managed to include the link to theis thread... probably copied the wrong tab

  Sorry for that, it is now updated with the correct link as it should.

  Shlomi

• HP Officejet 7612 large Format: HP Officejet 7612 Wide Format e-all-in-one is faulty

  HP Officejet 7612 Wide Format e-all-in-one is defective. Print function is no longer available, only fax

  I got it about 2 months and it was working fine, but now all of a sudden he lost his printing function and instead try to fax? I have even a land line phone, so I do not understand how the printer got confused autonomy. The print option is missing options.

  In addition, it seems impossible to take HP for assistance. The last time I tried, a month before, was because my money of £30 back ever happened, I've been hunting for days and no way to contact HP, so finally in desperation, I started trolling the FaceBook page of HP, all of them, several times each day, begging for counseling and that finally worked. Finally, someone contacted me and helped me to solve my problem.

  Hi @Terriann1,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet 7612 Wide Format e-all-in-one printer with a Windows 10 computer and when you try to print, the computer thinks you're trying to fax. I would like to help.

  I would start by download and run the HP print and Scan Doctor to check the installed printer software. This tool can diagnose and solve many problems of printing software and printer.

  What technical telephone contact HP Support, when you visit the Web site and go to support, you may need to create a case to fill in some blanks before the phone number becomes available. I also found this web page which could have information useful contact for your area - phone help around the world.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet 7612 large Format: Printer e-all-in-one-HP Officejet 7612 large Format printing paper selections not available in the printer dialog box

  Using Adobe Acrobat Reader DC to print the PDF to your computer. Print dialog box displays all the options paper size whatever the configuration by default or the selection of the paper size in the printer configuration. 11 x 17 paper in the printer and configured by default. Only four options are available: letter, legal, A4, and Executive. Nothing is wider than 8.5 "is available, and this so-called parameters up to 13 X 19 printer.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/SG-en/drivers/selfservice/HP-OfficeJet-7610-wide-format-e-all-in-one-series/5153788/model/6879040#Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select the appropriate operating system.

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  The desired print sizes should be there.

  Hope that helps.

• Windows 8 - officejet 6000 - just stopped printing black-

  Windows 8 - officejet 6000 - just stopped printing black-

  put a new black cartridge in and now it will not print black - going to test the page and color printing - can hardly see black text on the test page - gray value - has always been - no other changes have had recourse to the same printer for a little over a year.  Only clean the print heads still no black printing.

  Hi rea123,

  I understand that you have an Officejet 6000, which is currently not print black ink. I'm sorry to hear what is happening, but I will do my best to help you.

  I suggest that you first look through this document for Troubleshooting print quality problems because it may be a few steps that you have not yet tried.  This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer has also a few steps to know how to clean the print head manually.

  If all else fails, take a look at the Bob_Headrick station for soaking your printhead.

  Hope this helps, have a nice day!

• HP 7000 Wide Format: Test print (small squares and two birds) whenever I turn it on

  Whenever I turn my HP 7000 Grand Format, starts printing test print (small squares and two birds). How can I stop it. It kills my ink.

  Hi @AGCE,

• OfficeJet Pro 8620: ADF Scan black line down

  Hello

  When I scan documents using the ADF, I get a black line at the bottom of each page (only the right side of the book). I tried to clean than the small scanning area - but I still get the black line - any idea how to get rid of him?

  You can download a sample scan pages virgins og here: https://files.secureserver.net/0s4RbMeFgHa3lX

  I just wanted you to day.

  After replacing the printer OfficeJet Pro unit 8620 3 times (when having tried 4) and I tried a HP Officejet Pro 276dw with the same problem, I ended up cancelling my order and get my money back.

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf