ThinkPad T430s - the touchpad buttons not working not

Similar Questions

• N5050 laptop: the touchpad buttons not working do not.

  Hey, my laptop N5050 that is now JUST out of warranty started developing problems with the touchpad, a few days ago, mainly by pressing the left button once would be double-click involuntarily. Now the two buttons have stopped working altogether.

  Advice would be excellent to remedy the situation. As a result of this problem, I was forced to buy an external mouse, but wish to have my touchpad in working condition. I have experience in building the pc, but never a laptop. If the resolution is should a technique I try a manual correction or another solution?

  Thank you.

  I just corrected it and recorded here to answer you.

  I had exactly the same problem. I finally got sick of it and open the laptop to see what was going on. Looks like there is a lack of design with the n5050 and some other models that can cause the ribbon cable for the buttons on the touchpad to wave in the open air. All you need to do is to remove the touchpad/palmrest unplug the flat cable on the bottom of things to click buttons (probably disconnected and salty as mine was), blow gently to get the dust out and plug it in again. Here's a video tutorial that will take you through how to proceed step by step. http://www.YouTube.com/watch?v=YLIAZFLVrqs It actually shows how to replace, but if you just do what I did, take it apart and clean/re-seat connectors, you should be fine.

  The connector I'm talking about is those small tiny ranging from the bottom of the click buttons to the bottom of the touchpad is. It can be seen in the video at the top of the video coming out the metal brackets under the click buttons at 2:37 and the connector is located on the lower part of the clickpad. Ity bitty is and all of the Ribbon cables are fragile so please be careful and do all this at your own risk.

  Let me know if you have any questions on what it is and I'll try to get back to you as soon as possible.

• Pavilion DV7 the touchpad buttons not responding

  My new dv7 (select edition, windows 7-64 b) knows a few difficulties, right click. When I connect the USB mouse with buttons right and left I can right click but areas to the left and make touchpad a right-click differ at all. When I type in the box to right click, he left snaps; When I type in the box to left click, it left clicks. When I tap anywhere on the pad, he left clicks. I installed the latest synaptic drivers, the device properties window tells me that I am using synaptic clickpad V7.4. The tab buttons has a right click button Setup do secondary clicks and all the listening and the buttons are enabled, but still no right click. Looking at some pages of support on the hp website (http://support.hp.com/us-en/document/c00678194), I noticed that the screenshot they show from the menu 'tapping' seems different from what I have on my computer. Namely, that i miss the section "tap zones".

  If anyone can shed some light on this mystery, I would be very grateful.

  -Sam

  To start with you are tapping on right click area or pushing down? new touchpad on laptop new HP design is this button clicks are now integrated into the touchpad itself, but you will still need to make a physical click. Typing in the box click it will operate as a left click as it would activities tap the touchpad function...

• Satellite Pro L20 - right button on the touchpad does not work

  I have a Sat Pro L20.
  When I press the right button on the touchpad, nothing happens. The left button works fine.
  I checked the properties of the mouse left button is set as the main click with the right button, defined as the secondary click.

  Thank you.

  Hello

  Maybe the touchpad button has a physical malfunction.
  But first of all, you can try to reinstall the driver for the touchpad. Check if the resettlement will change something. But the truth; I don t think this will solve the problem. Anyway, try is free, you know.

  But if that does not help so I think you need to replace the touchpad.

• Satellite C870-155 - the Touchpad does not work

  I have a Satellite C870 - 155 (PSC8AE) and problems with the touchpad.

  The buttons work, but not the pointer/trackpad.

  The laptop was in need of a replacement hard drive, and I don't have any recovery media. I'm running a new installation of Windows 7 (Home Premium, 64-bit) vanilla.

  I installed all the drivers, that I can find (including the touchpad).

  I tried pressing F5 / Fn + F5, but this does not change anyuthing that I can see.

  I am running the latest version of the BIOS I can find (6.60).

  Any suggestions?

  > Everything seems to work except the pointer.
  I guess that s hardware problem and the touchpad module must be replaced.
  I m straight probably because if the touchpad would be disabled or drivers that would be misunderstood, the touch area AND the touchpad buttons would not work.

  In your case touch ONLY area/pad does not work, but the buttons

  But just to be sure: go into the BIOS (F2)-> Advanced tab-> the system setup
  Here you can check whether the pointing device (touchpad) is enabled.

• I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  This is a question which would probably respond by HP support, because it isn't really a Windows problem.

  Are you sure that the touchpad is not just turned off? Many laptops have switches, power switch, so you can rest your palm while typing one is not worry by pressing the key.

  Sometimes, there is a button above the key, a key on the Ko, or some have a stain on the pavement you waiting/tap/double tap/etc. to toggle the pad.

  If not, you could try to go on the site of HP and DOWNLOAD/reinstall assistance the SW for the touch pad.

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite M105-S3031: the TouchPad does not work

  Hello guys!

  I have a M105-S3031 Satellite. It's been 1 week shut down and this morning when I turned it on, the touchpad did not work, check status, that's like "enable." I installed a mouse cable and with it works well.

  Any help?
  TKS.

  Check it please again using FN + F9 key combination.

• FN + F3 disable the Touchpad does not work. Dell XPS L702X

  Hello, I am new to this forum.

  The function FN + F3 that disable the Touchpad does not work, my laptop Dell XPS 17 (L702X)

  I googled my problem and the only thing I found was this: http://en.community.dell.com/support-forums/laptop/f/3518/t/19454265.aspx

  I think that my problems with the touchpad started when I plugged a mouse into the USB port. It didn't work (it worked well before), and in material-sound-mouse control panel, the system asked me to uninstall a driver or other. I do not remember, but later the mouse worked.

  After this weird thing with the mouse, I noticed that the touchpad was malfunctioning. While I write, the cursor moves without touching the touchpad, it is annoying because it makes me write bad because he is moving in the middle of writing, as I write so it's a mess.

  The second oddity, the Fn + F3 does not disable the touchpad, the orange light come on (the led on the top of the touchpad), but the cursor can be moved in any case, with or without a connected mouse.

  I checked for driver updates, perform an audit of the system, checked for viruses, spywares and I don't know what I could do. I don't know if the problem with the mouse had nothing to do with the function Fn + F3 problem.

  I have not formatted or re installed windows 7, never.

  In Device Manager I have this:

  -mouse and other pointing devices:-Compatible PS/2 mouse

  Help, please. Thank you.

  DOH! Problem between Chair and keyboard...

  C:\dell\drivers\R289237

  Run the executable file of Synaptics.

  Download of extracts only the program on your disk. You must manually install the driver for the Synaptics touchpad with its own executable.

  FN + F3 now disables =)

• Recovery of the Internet and the Touchpad does not

  Hi all!

  I tried to format my Macbook Pro (2015 start, 13 "), so I wiped the disk with disk utility.

  Now, I'm the restart with CMD - R and a globe appears. I know that it means that the computer is trying to reboot from the internet, but I have to choose my Wi - Fi and insert the password.

  The problem is: the touchpad is not sensitive, so I can not perform the procedure. I also tried a keyboard and a USB mouse, but it does not work either.

  Thanks to anyone who responds!

  Start up your Mac in Mode without failure.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  
  

  Then start while pressing the command + R keys to access internet recovery to restore the OS X.

  Just to let you know, you don't need to wipe the drive using disk utility in your Applications / Utilities first folder. Only use OS X Recovery

  to reformat and restore the OS X.

  On Safe Mode

• After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

  Original title: left click not working not not on HP laptop

  On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

  Hi cyrilmillot,

  You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

  See the link to Adobe to download the removal tool:

  Adobe Reader/Acrobat removal tool

  After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

  Adobe forums

  http://helpx.Adobe.com/support/

  If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

  HP support

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

• Satellite C850D-11 q - keyboard and the Touchpad does not

  The laptop is a little more than a year and worked ok until recently.

  Symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.

  He progressed to the keyboard and the touchpad works do not randomly points while the use of the laptop.

  Finally cleared the HARD drive and restored windows 8 alone, the laptop still BSOD quite frequently - refuses to install the updates required for 8.1 and the keyboard and mouse often do not work even in BIOS Setup page. I reinstalled the RAM and HARD drive.

  Short of ideas, the keyboard and the touchpad work and so I guess that their connections are correct - but often they just stop.

  Any ideas appreciated?

  Thank you

  Hello

  > Finally cleared the HARD drive and restored windows 8 only
  I hope that you created before Toshiba recovery disks you have formatted the system.
  Did you?

  The recovery disks will allow you to reset the laptop to factory settings; on the same State as at the first day of the purchase.

  > First symptoms were the keyboard and the touchpad does not not on page 8 of windows logon. Pressing power to put the laptop into sleep and pressing still often got their work.
  Well, usually the keyboard problems are not problems system or software as the keyboard driver is part of the system and an additional installation of some drivers is not really essential and necessary.
  That is why in most of the cases the keyboard problems could be the causes of physical problems.

  However, after using the recovery disc and the parameters of the laptop back to factory State, both parties (keyboard and touchpad) should work perfectly.

  > the BSOD laptop still quite frequently - refuses to install the updates required for 8.1
  BSOD doesn't look very good. As mentioned above; parameters of the laptop back to factory settings should solve all the problems in the system. In the case where the BSOD appears even if the power has been turned back to factory State, a hardware problem could be the reason for this.

  I had also some problems with the update 8.1 Win. The system to win 8 could not find the Win 8.1.
  But the reason for this was simply. I had to install all updates to Win 8 and had to update the State system before trying to update to the next level following 8.1 Win

  So, what can I say: I will try to put the laptop initial configuration using the recovery disk.
  Then I would try to get automatic updates (a few reboots were essential too). After that, I would check the functionality of the keyboard and the touchpad. In the case where them parts would not work, I would contact the service to check if the two pieces.

• Lenovo IdeaPad 100-15IBD keyboard and the touchpad does not

  I bought a Lenovo IdeaPad 100-15IBD a few days ago, and after a series of problems that I managed to fix, I woke up this morning to find that my keyboard and the touchpad do not work. Last night (about 9 hours ago) it was working fine. Anyone has an idea how can I fix?

  Problem solved. It was because of the abdriver for keyboard and mouse I have installed from the official website of lenovo, I don't know how or why, but when I uninstalled it, it started working again.

• Satellite L450D-11V - the touchpad button broken

  Hi, I have a Satellite L450D-11V which is only about 3 months, but left under the touchpad button has just broken. It has lost its spring and sank down in the case, so it is now off. Still, it works but not very well and clearly needs repair.

  My question is is it useful to open the case to see if something has slipped? The manual does not cover this, but it seems that it can be opened by removing the screws from the case under. My only concern is that I don't want to move something then not be able to re - assemble! A House would be obviously preferable to ship from Toshiba and be without it for a week.

  Has anyone else had a problem with the touchpad buttons break after a short period of time?

  This is typical warranty issue and even thinking laptop open on your own.
  At first you do not have manuals maintenance with an exact description of how to do this and this action may void the warranty.

  Contact service, explain the situation and ask how long they need for repair.

• Is satellite U400 - possible to replace the touchpad button?

  Hello

  I need help please. I want to know if there is a possible way to change the button to my Satellie U400 because they become soft and they are not as good and strong as it was before, please someone know if I can delete these and put 2 new sound?
  If you don't understand exactly what I want to say take a look at the photo and you will see/understand.

  [http://oi56.tinypic.com/j0wwoj.jpg]

  Thank you.

  Lööw salvation,

  I'm sure that it of possible to replace the touchpad buttons because you can replace everything on a laptop. But I think that it s a little trickier because you must remove a lot of pieces and that's not easy.

  You should ask an authorized service provider guys can order the new spare part for you and exchange it. Just write an email, for example, to get in touch with them.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider