ThinkPad T61 and some of its minor problems?

Similar Questions

• Impossible to move the mouse cursor using the trackpad on laptop Sony and some of its functions does not work.

  Former title: Sony trackpad not working no-Windows 8

  Hi guys,.

  I have a sony vaio s series that I bought last January. It comes preinstalled with windows 8, and I use it only about 2 - 3 times a week. 2 weeks ago my trackpad stopped working because I can't move my cursor. I can zoom in and zoom out, and other things, but there is a problem with some functions of the trackpad. I checked the synaptic driver and it says that it is up-to-date.
  now, I suspected that it might be a hardware problem, so I sent it to sony Service Center because it is still under warranty. Unfortunately, it is not the case and I was informed that it's a software problem. They advise me reinstall windows 8 because it is the only solution to the problem, they believe. (I want to clarify that it is probably not Fn + F1, as when I start the laptop, the trackpad works perfectly fine for about 30 secods and suddenly Soundtracks autour after that).
  I hesitate to do because it is a daunting task and I'm not really intuitive with such things. I wonder if you have any suggestions or if anyone has experienced the same problem.
  My hunch is that a windows update is responsible for this, but I'm not entirely sure. Indeed, 3 weeks after I bought my laptop, that this has already happened to my once but after the reboot, the trackpad has worked well. now even by restarting the computer does not help. Basically, I have to use a mouse which is not convenient when I'm on the road...
  Thank you very much! appreciate any help I can get, really. I'm about to want to sell my new laptop T_T

  I finally solved the problem. I reinstalled the driver in safe MODE. Hope it could be useful to someone else

• ESXi 4 with AMD phenom x 3 720 and M3A78-EM motherboard (minor problem)

  Hello

  I'm quite new in the world of vmware. I have successfully used this combo whitebox for about 6 months. In order to have a successful install, I had to update my bios to ver 2003 and use pcie nic cards intel. After a successful installation, I looked inside the host, and he acknowledged the CPU X 3 720 with all 3 CPU cores. It also allowed me to assign all 3 hearts to a box of windows media 7 I have set up as an image on the host computer. The question and the problem I have is: in the new windows 7 x 64 image, it does not show 3-wire, it shows only 2 hearts. Detailed information inside the say that Windows 7 is an AMD phenom X 3 2.81Gz processor with 2 processors, not 3. In the Task Manager, the window of cpu usage shows only 2 windows instead of 3.

  Two processors are much for this image will do, but it would be nice to use all 3 CPUs, if possible.

  No matter what I try, I can't get windows 7 to recognize all 3 hearts. Even after I try all the stuff online, including the re - install, it's not even a hint of success.

  I have concluded that the vmware bios used for images, does not correctly recognize the CPU with 3 hearts. Am I correct in my assumption?

  Thank you

  Seems that I was mistaken with the number of vCPU that you can assign to a Windows 7 VM.

  However, the vCPU is presented as the virtual machine CPU sockets and Windows 7 only supports 2 physical CPU (Starter and Home 1 only). This looks so much like Windows ignores the third CPU. View the comparison to compare features of Windows 7. Search for "physical processor Support.

  If you have a licensed version of ESX (i) you could try the currently unsupported feature to assign the vCPU 3 as a multi-core CPU.

  See licenses processor for your application by

  André

• My iphone 6 curve in my back pocket and apple says its my problem after I sent it.

  Apple wants $ 300 to fix.

  Try searching. This whole issue came when the iPhone 6 series phone was released in 2014. It's a dead issue. The force required to bend the device has been tested and proved to be more than a passing thing. No legal action.

• ThinkPad t61 brightness resets

  I just bought a refurbished thinkpad t61 and he took advantage of that day. Only problem is every time I have the brightness, that it will always return to the definition above whenever it restarts. I tried adjusting brightness in the power plan settings and save but it will always return to the default each time I have to start again. Is anyway to fix this?

  Hey there pszet0,

  I found another thread with a question similar to yours. Its solution has been updated to four specific drivers, and the machine started to save the power plan settings. Here's a link to the page of the pilot and a list of driver does it reference. As always, make sure you back up before you start on this path. It can be the path that will lead you to find resolution.

  Start here because I think it will be more likely involved:

  Power management driver

  Your display driver there

  And then these:

  HotKey features integration pilot

  Driver Interface System

• Modernization of the Lenovo Thinkpad T61 i3 CPU.

  I have a Thinkpad T61 and I wonder what kind of processor i3 current is compatible with my laptop?

  I need a processor that can handle older games like Morrowind with ease, I currently have a pathetic Centrino processor.

  Goodegg says:
  I want a current i3.

  Well, it's just not going to happen.

  The fastest CPU, only one of these cards will have X 9000, which is a 2.8 GHz Core 2 Extreme. It is also $ 200-250 depending on his luck.

  If you need a current CPU, you will need to get a more recent/current machine.

• My ThinkPad T61 VERY VERY VERY and I mean VERY slow at the start why?

  Hello

  I just bought ThinkPad T61 brand new, for $500

  Speed: 2.0

  Memory: 2048

  I mean this should be pretty quickly.

  in any case, it takes about 5 to 6 min just to start upward and its windows XP Server 2003 with Service Pack 3

  and I only have one installed program, its air and nothing else, the computer is still slow like that, even my 2 friends bought the same computer and as slow as mine, his

  and if you guys wonder why its cheap, because in my University they sell it at this price for everyone (even the poor guy) to buy a good laptop for a good price.

  So what do you of the problem, my friend told me that his perhaps because of windows server 2003 with SP3, but I do not know, and when my University gives me the laptop, they don't give you a CD format, so it's saying I can't get it back to the original Setup, but I think to buy a new CD the problem I can't find XP more, every store I see have Vista only.

  so do you think I'll buy Vista so I could have a fast computer instead of a SLWOOOO, and if I go to Vista, is touch pad, the track point and the finger print thing will continue to operate, (I want to say is a drivers for windows Vista)

  I know I write a lot, but please help me guys to get the best out of my computer.

  Thanks in advance

  Hello

  Congratulations on your new Thinkpad! And Yes, it will be fast enough.

  I would suggestt to uninstall Antivirus like Norton or to get an update for Norton 2009.

  AntiVir and AVG are doing a good job too. Uninstall firewall thirdparty, if it is installed.

  If you install Vista then, we will work all programs. Install Vista and download the program

  Homepage of Lenovo system update.

  It will install all the necessary drivers for you, even for XP, if basic a copy.

  For more information, read own Vista installation NB guide

  Or XP clean installation guide

  Concerning

  Andreas

• Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Try this:

  Ctrl + alt + delete > bottom left on the Page, click, accessibility > uncheck, magnifying glass, keyboard

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• problem with thinkpad x220i and rangeplus router wrt 110

  Just got a new thinkpad x220i and whenever I try to connect to my wireless network, accidents of router and my cable modem seems to descend with her and the internet connection is also lost.

  I need to restart the whole nine yards.

  I got this router - rangeplus wireless wrt 110 for 3 years without problems with a mac, my ipad, iphone and my previous thinkpad x 201

  Someone has an idea of what could be the cause?

  very frustrating

  Thannks

  In the computer turn off IPv6 under properties for wired connections and wireless LAN.  Restart and try again.

• ThinkPad T61 random BSOD with VISTA SP1

  Hello everyone, I'm new to this Forum.

  The reason why I joined the community is because I'm going to random BSOD followed to stop and restart my T61. It started some time earlier this year when I installed Vista updates with the system update utility. It seems Vista Business SP1 related somehow. Well, I could not solve the problem, I did a clean install of Vista Business SP1 with all up-to-date drivers and software from the Lenovo Site. The problem still remains, and I couldn't find a solution.

  I installed the Windows Debugger tool und just managed to use the tool and get a report (I am inexperienced). Here are the specifications of my ThinkPad and a snapshot of the debug report.

  Any hint is appreciated with the best regards from Switzerland ;-)

  Product:

  ThinkPad T61 6463-4YG

  Operating system:

  Windows Vista Business SP1

  Original description:

  T7300 (2 GHz), 1 GB RAM, 80 GB 5400 RPM HD, in 15.4 1280 x 800, Intel X 3100, CD-RW/DVD,.

  Intel 802.11agn (n-disabled), Bluetooth, Modem, 1 Gb Ethernet UltraNav, secure, chip

  Fingerprint reader, 6 c Li-ion, WinVista Business 32

  Debug report

  Debug version of Microsoft Windows (R) 6.9.0003.113 X 86

  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\Mini072408-01.dmp]

  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols*http://msdl.microsoft.com/download/symbols

  Executable search path is:

  Windows Server 2008 Kernel Version 6001 (Service Pack 1) MP (2 processors) free x 86 compatible

  Product: WinNt, suite: TerminalServer SingleUserTS

  By: 6001.18063.x86fre.vistasp1_gdr.080425 - 1930

  Kernel base = 0x81e14000 PsLoadedModuleList = 0x81f2bc70

  The debugging session: 19:06:15.805 Thu Jul 24, 2008 (GMT + 2)

  System Uptime: 0 days 1:55:32.750

  Loading the kernel symbols

  Loading user symbols

  Loading unloaded module list

  *******************************************************************************

  *                                                                             *

  * Bugcheck analysis *.

  *                                                                             *

  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  9F error checking, {3, 8ed38030, 8ed38030, 95c5dbc0}

  Probably caused by: usbhub.sys

  Follow-up: MachineOwner

  ---------

  0: kd >! analyze - v

  *******************************************************************************

  *                                                                             *

  * Bugcheck analysis *.

  *                                                                             *

  *******************************************************************************

  DRIVER_POWER_STATE_FAILURE (9f)

  A driver is causing an inconsistent power state.

  Arguments:

  Arg1: 00000003, a device object has been blocking an Irp for too long

  Arg2: 8ed38030, physical device from the stack object

  Arg3: 8ed38030, functional device object of the stack

  Arg4: 95c5dbc0, blocked IRP

  Debugging information:

  ------------------

  DRVPOWERSTATE_SUBCODE: 3

  IRP_ADDRESS: 95c5dbc0

  DEVICE_OBJECT: 8ed38030

  DRIVER_OBJECT: 84e2e540

  Nom_image: usbhub.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 47919064

  MODULE_NAME: usbhub

  FAULTING_MODULE: 879c 9000 usbhub

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X9F

  Nom_processus: System

  CURRENT_IRQL: 2

  LAST_CONTROL_TRANSFER: from 81e47b6c to 81ee1163

  STACK_TEXT:

  81f09acc 81e47b6c 0000009f 8ed38030 00000003 nt! KeBugCheckEx + 0x1e

  81f09b28 81e476bc 81f09b94 81f09c50 81f0e801 nt! PopCheckIrpWatchdog + 0x1ad

  81f09b68 81ecad00 81f224e0 00000000 952fbaa0 nt! PopCheckForIdleness + 0 x 343

  81f09c88 81eca936 81f09cd0 243dd002 81f09cd8 nt! KiTimerListExpire + 0 x 367

  81f09ce8 81eca483 00000000 00000000 0006c7f3 nt! KiTimerExpiration + 0x2a0

  81f09d50 0000000e 81ec8f9d 00000000 00000000 nt! KiRetireDpcList + 0xba

  0000000e 81f09d54 00000000 00000000 00000000 nt! KiIdleLoop + 0 x 49

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: 0x9F_IMAGE_usbhub.sys

  BUCKET_ID: 0x9F_IMAGE_usbhub.sys

  Follow-up: MachineOwner

  ---------

  0: kd > lmv

  start end module name

  81e14000 cd 821 000 nt (PDB symbols) c:\symbols\ntkrpamp.pdb\BA057DABC623462B9EF1D336E0F6BDAD2\ntkrpamp.pdb

  Loaded symbol image file: ntkrpamp.exe

  Mapped memory image file: c:\symbols\ntkrnlpa.exe\4812BD713b9000\ntkrnlpa.exe

  Image path: ntkrpamp.exe

  Image name: ntkrpamp.exe

  Timestamp: Sat Apr 26 07:28:17 2008 (4812BD71)

  CheckSum: 003772A 9

  ImageSize: 003B 9000

  File version: 6.0.6001.18063

  Product version: 6.0.6001.18063

  Flags of the file: 0 (mask 3F)

  Folder OS: 40004 NT Win32

  File type: App 1.0

  File date: 00000000.00000000

  Translations: 0409.04b0

  CompanyName: Microsoft Corporation

  ProductName: Microsoft® Windows® Operating System

  InternalName: ntkrpamp.exe

  OriginalFilename: ntkrpamp.exe

  ProductVersion: 6.0.6001.18063

  FileVersion: 6.0.6001.18063 (vistasp1_gdr.080425 - 1930)

  FileDescription: NT kernel & system

  LegalCopyright: © Microsoft Corporation. All rights reserved.

  879c 9000 879fd000 usbhub (PDB symbols) c:\symbols\usbhub.pdb\D183443816864A0399C1A3BB1CB252402\usbhub.pdb

  Loaded symbol image file: usbhub.sys

  Mapped memory image file: c:\symbols\usbhub.sys\4791906434000\usbhub.sys

  Image path: \SystemRoot\system32\DRIVERS\usbhub.sys

  Image name: usbhub.sys

  Timestamp: Sat Jan 19 06:53:40 2008 (47919064)

  CheckSum: 00039FEE

  ImageSize: 00034000

  File version: 6.0.6001.18000

  Product version: 6.0.6001.18000

  Flags of the file: 0 (mask 3F)

  Folder OS: 40004 NT Win32

  File type: Dll 2.0

  File date: 00000000.00000000

  Translations: 0409.04b0

  CompanyName: Microsoft Corporation

  ProductName: Microsoft® Windows® Operating System

  InternalName: usbhub.sys

  OriginalFilename: usbhub.sys

  ProductVersion: 6.0.6001.18000

  FileVersion: 6.0.6001.18000 (longhorn_rtm.080118 - 1840)

  FileDescription: Default driver of USB hub

  LegalCopyright: © Microsoft Corporation. All rights reserved.

  Unloaded modules:

  87ddd000 87dea000 crashdmp.sys

  Timestamp: unavailable (00000000)

  Checksum: 00000000

  8b 600000 8b6c8000 dump_iaStor.

  Timestamp: unavailable (00000000)

  Checksum: 00000000

  8e709000 8e712000 kbdhid.sys

  Timestamp: unavailable (00000000)

  Checksum: 00000000

  8b7f4000 8b7fd000 LVUSBSta.sys

  Timestamp: unavailable (00000000)

  Checksum: 00000000

  In the meantime, I found the solution to my problem. My ThinkPad T61 is anchored to a mini advanced docking station. When you use four USB ports, the system blocks at random resulting in a BSOD. Since I use only 3 USB ports no BSOD more.

  Take care and have fun with your ThinkPad

• iMac crashing and restarting on its own

  Hi all

  My iMac has been crashing lately and restart on its own. After trying to solve what was going on, I noticed that, just before these accidents occur, the following 2 warnings repeatedly appear on the Console:

  kernel [0]: could not open the file 2

  kernel [0]: vm_swap_create_file @ 1554 dry failure

  During the inspection, I realized that the var, there is no /vm folder and, therefore, no swap file, that made me suspect that the problem is related to virtual memory.

  I tried to launch an intensive application of memory while monitoring the use of memory through Activity Monitor and, of course, when all memory is used, the system crashes. Used swap shows 0 bytes at all times. In comparison, my MacBook Air has always a certain amount of used Swap data, even if some memory is used.

  I tried to verify if the virtual memory was somehow disabled, by using 'sudo launchctl load-w /System/Library/LaunchDaemons/com.apple.dynamic_pager.plist' but it seems that the service is already loaded.

  I'm at a loss and need help. Someone at - it clues about what is happening?

  Read this previous post of the Apple community...

  Boot the system using all the memory of my app and have to restart every few minutes. Chrome and firefox only apps that seem to cause the problem. Someone at - it suggestions? memory Mac early 2009 16 GB pro

• My thinkpad W520 and my ssd (Crucial M4 128)

  Hello people. I read the thread entitled W520 and various issues of ssd. In fact, it was a relief for me to read after all the trouble I had try my M4 running successfully in my W520.

  When I first installed the M4, it wouldn't let me install windows. I tried many things and almost come to the conclusion that the drive itself is bad because he called me all kinds of problems. That opinion changed when I tried my M4 in other machines. It all worked perfectly. Then, I thought: * beep *? Would it be the laptop? When I came across the wire, that I mentioned above, I knew I wasn't alone and knew that it was actually a compatibility issue.

  However, I was reading comments the other day on the W520, and many critics included ssd in their tests and reported good results. There was no mention of any problem of ssd. I also noticed in many forums that some users take advantage of their W520 strengthened by the performance of the ssd.

  So, it's like a situation of chance/unlcuky? Some w520 will work with ssd and some won't be fair?

  There is only one thing that I haven't tried yet. Try the M4 in the my W520 with its latest firmware update (0009)... better suddenly you think?

  And where is all this lenovo?

  Thank you.

  Just for you guys do know. He has WORKED with the latest firmware.

  Now, I write my W520 with the Crucial installed M4.

  Thanks for everyone.

• ThinkPad T61 T61p radiator upgrade.

  Hello

  My Thinkpad gets uncomfortably hot in programs such as Photoshop, Dream Weaver and some games. Update the old heatsink to a T61p radiator would help to reduce the time. I clean the portable regularly (every 2 months or more) and run TPFanControl but he gets up to 80 c time.

  Data sheet: Core 2 duo T8300 2.4 Ghz / RAM 4Gbs and the legendary Nvidia nvs 140 m chip.

  Thank you.

  ~ John

  johneasthamx40 wrote:

  7663. 11 G

  It's the original configuration:

  ThinkPad T61 (7663-11G)
  T7100(1.8GHz), 1GB RAM, 80GB 5400rpm HD, 14.1in 1440x900 LCD, 128MB nVIDIA Quadro NVS 140M, CDRW/DVD, Intel 802.11agn(n-disabled), Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 6c Li-Ion, WinVista Business 32
  

  Renewing the thermal paste would be my first recommendation. And it's a case of AS5 ;-)

• Security Administrator in Windows vista, some programs cannot uninstall problem.

  Malwarebytes's Anti-Malware; MSE is an anti-virus.

  They are 2 completely different things.

  These days, you need these two types of emissions; but CERTAINLY, you must have an antivirus installed.

  Windows Defendar is an anti-spyware program.

  And MSE, AVG, McAfee, etc. has conflicts or turns them off Windows Defender.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Use MSE and the free version of Malwarebytes Anti-Malware for your security programs...

  And use by default the builtin Vista Firewall; It is very good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In my opinion, you have not need of 3rd party firewall, such as Zone Alarm.

  See you soon.

  Mick Murphy - Microsoft partner

  On Monday, May 17, 2010 17:34:55 + 0000, me_yoyo wrote:
   
   
  > Hi Michael Murphy,.
  >
  > I followed your instructions and I took a few step according to Ken Blake earlier instruction. He really worked some point let me explain what kind of problem solved. Two anti-malware which Malwarebyte s and microsoft essential to the program. I remove a Mr. Malwarebyte s key and installed.
   
   
  Sorry, but if you think that I offered to do that, I made my point
  wrong or got you me wrong.
   
  Microsoft Security Essentials is an anti-virus program. MalwareBytes
  Anti-malware is an anti-spyware program. They protect you against both
  different types of malware (malicious software) and you need
  protection from both types.
   
  So please get Microsoft Security Essentials, or install another
  anti-virus program. Microsoft Security Essentials is one of the best
  Freeware ones, but if you're willing to pay for one, I recommend eSET
  NOD32.
   
   
  > This program is such a good kind that he performed to search files and delete it. Another milestone I have scan as the instruction of ken. that came out well without any problem and the scan made a correction of a minor problem. This now I can too much Setup and I can view the Task Manager. Just for now, I have a few Eve question that I am trying to install zone alarm firewall, but there are some temp work software stop file to install. Then a Microsoft Security Center is not upward with full screen I want to say. I has no control only one which is in turn the centre security. I checked the problem report what causing this temporary file. It was the conflict Mcfee software problem which I have not in my
  > computer. I don't know that it could be the conflict by windows defender or other microsoft Security Center.
  >
  >
  >
  > Thank you
  >
  > Me_yoyo
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger