ThinPrint: virtual printer does not

Similar Questions

• "I get a message when troubleshooting my message" printer does not "on my screen, it says"contact the network administrator. What does that mean?

  I think that the port of my computer does not accept my printer

  Hello

  (1) what is the brand and the model number of your printer? In addition, how the printer is connected to your computer?

  (2) is on a network or locally connected?

  (3) what operating system is installed on the computer?

  (4) when this printer worked very well for the last time?

  (5) where to get you the message printer does not, it is while printing a document or by pressing any button on the printer?

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.
  Note: The following troubleshooting applies for the Windows 7 operating system.

  Method 1: Run the printer Troubleshooter
  Name, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  On the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. below "Printing on the following ports" section, select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  e. click the general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  I hope this helps.

• Dell Photo AIO 962 Printer does not print. Running a Dell Dimension 8400 CPU, with the Windows XP platform.

  Problem with printer does not print.

  I tried to uninstall and reinstall the printer drivers; Did not work.  Tried to start your Virtual Tech; He said that he could not solve the problem; and to communicate with you, dear friends!  I need help... I don't know what else to try.  Eddir

  I also need to recover the files of the program: dlbxcnv4.dll; dlbxmon.exe; and dlbxaix.exe.  because of the "runtime error".

   

  Hi eddir,.

  I suggest to reinstall the Dell printing software to see if the problem is resolved.

  Which should reinstall the DLL files you are looking for as well.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello printer does not appear in the list of IOS Printer Options

  I have a home network with a router of Time Capsule.

  I connected my Cannon MX920 wireless network.

  The printer worked very well for my MacBook Air, my iMac, my Windows laptop, 10, my iPad and my iPhone.

  There are no known pending software updates to devices.

  I connected my HP OfficeJet 6500 (E709a) for the MacBook Air via USB and it works very well.

  I installed on the portable Windows 10 Hello and I can print to the printer OfficeJet @ MacBook Air laptop Windows 10 and the iMac (and of course the MacBook Air) very well.

  In Safari / Bookmarks / Hello on the MacBook Air, ONLY the Cannon printer is listed.  The OfficeJet directly attached via the USB port does NOT appear.

  My QUESTION is how can I make the printer OfficeJet @ MacBook Air appears as option in the printer Options / recent printers of dialogue so I can print to it from my IOS devices?

  This seems to be a pretty simple configuration problem, and I don't see the need to spent $ 20 on the App Store to make it work.  I see some comments along the lines of this problem, but the solutions are quite difficult to follow and seem to depend on having the printer appear in Safari / Bookmarks / Bonjour list.

  I'll appreciate any solution (or explanation as to why it isn't a).

  Hello DevGuy,

  Thank you for reaching out to the Community Support from Apple. I know how useful it can be to have all your devices on the network with a central printer, and I'd like to help offer a glimpse into what could prevent your of you using to print to your HP 6500 iOS devices.

  In order to print from a device iOS, the printer must be connected to the same Wi - Fi network and supports the Air Print feature. After some research, it seems that the 6500 HP does not support this feature directly. You may be able to find a solution based on HP in the App Store app, but this printer does not have Air Print capacity based on support documentation, that I could find at HP.

  For more information about known printing of Air and a list of compatible printers, have look at this article: About AirPrint

  If you have any other questions, please help again. The entire community is here to help.
  -Best regards

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• HP Envy printer 5540: printer does not recognize paper 8.5 x 11

  I removed the paper 8.5 x 11 and printed several photos 5 x 7. I removed the paper photograph 5 x 7 and reinstalled paper 8.5 x 11 in the main tray. Printer will not recognize paper 8.5 x 11. I removed the paper and slid back the paper guides and reinstalled the paper. No change in the problem. When I select "Copy" on the screen of the printer and go to settings, it displays "tray and main paper tray: 5 x 7" if I try to print from the computer and select 8.5 x 11 paper, the printer does not recognize that size paper and continues to display paper 5 x 7.»

  Hello

  Open and close the paper tray, here, it will show on the screen of the size of the paper.

  Click on modify and change paper size we Leter and the type of paper, such as plain paper, then check all difference.

• I'm on a mac and my printer does not print

  I'm on a mac and it sends the document to my printer (Hp Photosmart 4680 all-in-one), but the printer does not print. My printer worked fine and now it will not print. I'm doing something wrong. This has happened once before and I am frustrated with and left for about 2 days, I had tried everything I could think of, unplug the unit for an hour or more, uninstalling and reinstalling, checked ink levels they were very good. Then all of a sudden, he started working again. I turned on my computer and the printer, and surprisingly it comes to start printing. Does anyone else have this problem? If so what do you have? Or someone has any suggestions of what I can hurt!

  Thank you

  Make sure that your OS X is healthy:
  
  1. download and install OS X Combo Update.
  2. download and install the printer driversHP from Apple.
  
  Finally, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page (if you want).

  Do not connect your printer via a USB hub, connect directly to your Mac.

• Printer does not print not complete pages.

  When I give print command, the printer (I use MS Works), the printer starts to print a page and then, after a few lines, will be offline prematurely. The printer does not turn off. It sounds the signal that the job is done and ejects the sheet of paper. Maybe 5 lines are printed until the printer ends prematurely.

  Hi Davy40,

  I understand that you are having problems with your printer only give you partial pages, but acting like it printed the entire page. I'm sorry to hear what is happening, but I will certainly do my best to help you.

  I just need to ask you some questions to help you better!

  1. what model printer work?

  2. you are working with a Windows or a Mac computer?

  3 do you get errors when trying to print?

  4. how the printer is connected to the computer? USB or wireless?

  Once I have this information, I should be able to help!

• C4795 HP printer does not print in the browser firefox, but in IE

  I have a printer HP C4795 and HP windows 7 and the printer will not work with firefox. It works fine in IE. I had trouble with firefox crashing yesterday so I uninstalled and reinstalled and printer does not work. has worked in firefox before my test yesterday.

  I see that you started another thread of question - https://support.mozilla.com/en-US/questions/888892 - so I guess that your problem is not resolved.

  If it is printing in an XPS file, your printer is not selected as the destination for the copy. You must select the printer in the printer - name box. See the screenshot.

• HP jet 7500 a desktop: office jet 7500 a print does not correctly

  Hello
  After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
  any ideas?

  Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

• My printer does not work on Firefox?

  My printer does not work on Firefox? It works on explore?

  "My printer does not work on Firefox" gives no details on the problem. It is a good starting point:

  • http://KB.mozillazine.org/Problems_printing_web_pages

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• Printer does not print black

  My HP4620 all-in-one printer does not print in black.  I put in all the new HP ink cartridges.  I used the 'tool' function to clean the printer heads (floors 1 and 2).  I downloaded the HP doctor and ran the diagonistics.  Nothing seems to have worked to get my printer to produce black text.  Once when I was feeling my test page appeared to them as an attempt very, very small printer to print black, but it is unreadable.  Any help would be appreciated.

  loml

  Hi @YvesD_fr,

  Welcome to the HP Forums!

  Now, Yes, you should be able to request a replacement. Will you please just phone technical support team in your area and they will help you better that they can

  Let me know how things are going for you!

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.