This database is not configured, metric Collection error

Similar Questions

• The metric Collection error

  Hello
  
  Running RAC 11 GR 2 on 64-bit Linux. My cluster database is currently displayed status as metric Collection error in MS. There is an error under the metric link Collection errors, below, yesterday (the db real cars name is there, I've just omitted here). It's an isolated incident that can be erased somehow? Database seems to be fine, officers report regularly and all other parameters are reported.
  
  Advice?
  
  Thank you.
  
  Target [name rac]
  Database of type Cluster
  Metric response
  Collection Timestamp 4 April 2010 15:21:53
  Failure of Collection of Type error
  Message received an exception when evaluating sev_eval_proc for: name of the target = [name rac], metric_name = response, metric_column = status; Error Msg = ORA-20631: invalid Agent inaccessible clearly violation received for: inaccessibility clear gravity received with the current state = 2 (target_guid = 3995270716BF3C935D26DBA154740F4C) (policy_guid = 6607353128D2612797EF218D40B5A8BF) (key_value =) (collection_ts = 2010-04-04 15:11:53) (violation_level = DELETE INACCESSIBLE) ORA-06512: at "SYSMAN.". EM_VIOLATION_CHECKS', line 1295 ORA-04088: error during execution of trigger ' SYSMAN. ' EM_VIOLATION_CHECKS

  Try this solution out of Metalink (think you hit a bug after a re-boot of CARS):

  1. If the objectives are available, create a short power outage for all targets in the cluster.
  2. once the failure is complete, perform the following commands for agent:
  emctl stop agent has.
  b emctl start agent.
  clearstate emctl c agent.
  Download emctl d.
  3. check the status of the target in the console. Targets should be available.

• This application is not configured properly, maybe you should try to reinstall

  This application is not configured properly, maybe you should try to reinstall. He says this even if it was just installed, or was not yet installed. How can I fix it? His allusion to a Bethesda game. But I think that the issue is much more than that

  I activated the AutoPlay on the hard drive and I don't really see a problem that I know in the event viewer. When I try to run the game, it appears every time.

  And Bethesda support said what?

  And try to be more comprehensive and coherent when you ask them.  In other words, identify the game, explain what you mean by "it was just installed or is not installed", and why you "think that the problem is much more than that."  What do you think is the problem?

  Whatever that allows automatic reading has to do with your problem?  Why you mention it?

  What errors or warnings are displayed in the event viewer, even if they do not seem to be a problem for you?

  Be sure to identify the version of Windows you have, including service pack.

  Complete without paraphrase error messages display also allows to diagnose problems.

  Finally, try to uninstall the application using the control panel > Add / Remove programs.  Then use Free Revo Uninstaller to remove remnants of the disenfranchised.  Then run Disk Cleanup (start > run > cleanmgr.exe > OK) and restart the computer before you try to reinstall.

• This application has not been installed 0x80073cf9 error

  I have the same problem. I can not install any app on the Store, still have the same error: «this application has not been installed...» ", and then point to the error code"0x80073cf9 ". I see that a lot of people have the same problem. It looks like a bug in the new Windows 8. I have Windows 8 Pro. I just installed yesterday.

  I'd appreciate any help.

  Hello

  Look if the 'AUInstallAgent' file is missing from the windows folder. If this is the case, you will need to create a new folder, rename it to "AUInstallAgent" and restart your pc.

  Thank you post from BJArmstrong on October 22, 2013

  I wanted just to update this option to add that I had the same problem in Windows 8.1 and the solution was to create the 'C:\Windows\AppReadiness' directory which apparently replaces the directory 'AUInstallAgent' of Windows 8.

  Why the Bank cannot simply create the directory if it lacks a true mystery...

• Cannot install a network - error message: this wizzard can not configure a network connection.

  Vista Business SP2 32 bit OS

  Impossible to set up a network connection using a wizzard.  Message: This wizzard cannot set up a network connection.

  A broadband connection was founded prviously.  There is no display of the network in 'connect to a network window.

  a new folder by name hiddenpbk appeared on the desktop and through which I can connect to the previously established connection.  but can not connect via "connect to a network window.  Neither I am able to set up a new connection using the wizzard.

  Please helpme.

  Hello

  Can you explain what connection to a network means in your case?

  What exactly you want to connect?

  If you have a valid broadband (Internet connection), you are already connected to a network.

  If you want to check your wireless system follows this process.

  If as a result of this process, you find something wrong, tell us what it is.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Since the update to 14.0.1 javascript error appeared (this.transforms is not defined - 3-4 errors per second)

  Our phone system of companies has a web interface since the 14.0.1 update is no longer works. I tried to open it in safe mode with no extension active and ensure that cache has been cleared. In the error logs, I see "this.transforms is undefined" and is repeated 3 - 4 times per second, no matter how long the page is opened. Many pages in the web interface are compressed and if I select a different tab background change but not the areas that fall within her and all submit buttons are ignored.

  It works in other browsers and in older versions of firefox, so our miracle temp to say personal use Chrome until we have a chance to roll back on Firefox, even if we are not sure if Firefox is simply updating again.

  Finally solved the problem. Discovered that the issue was only happening on HP systems so that it narrowed down. Yet a new windows install using their disks restore would fail on the new update (but only if HP utilities were all re-installed - for example, as fingerprint reader security utilities). I got some new updates for those and the problems went away. Yippee. My guess is that it was the security utilities that run in the background, because they are not browser so plugins work even in SafeMode to browser.

  Glad we got going I didn't leave Firefox. What a pain though, as he had really left me speechless.

• This computer is not running the real error Windows - Me Too

  I'm having the same problem also. I have a DELL refurbished with a certificate of windows 7 & sticker. It worked no prob for 2 years before the error window begins to appear. I posted my diagnostic report.

  Thanks in advance!  Dan

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 8 G 348 - 2M9JY - FJTMM
  The Windows Product Key hash: oFMdsHwVuuNBFc7Q8POiu2sO8Ps =
  Windows product ID: 00359-OEM-0630032-25721
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {13D1FFAA-2E03-4E1D-BED9-F2A38D3F4579} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003

  Other data-->
  Office details: {13D1FFAA-2E03-4E1D-BED9-F2A38D3F4579}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-FJTMM00359-OEM-0630032-257213S-1-5-21-2934963321-848282646-695198926Dell Inc.. Precision T3400 workstation Dell Inc.. A09 20090604000000.000000 + 0004CEA3207018400F804090409Time(GMT-08:00) Standard Pacific03DELL B9K 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: a63275f4-530c-48a7-b0d3-4f00d688d151
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00212-300-325721-02-1033-7601.0000-3072014
  Installation ID: 016691734485689944260941267711311284739045653662299541
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: FJTMM
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 14/01/2015 08:44:18

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0 x 0000000000000008
  Event timestamp: 1:9:2015 06:51
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\wat\watux.exe

  --> HWID data
  Current HWID hash: MAAAAAEAAgABAAEAAAACAAAAAgABAAEAln2el8bgHrQ67HbwbFhiPcSzbIxK3kbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL B9K
  FACP DELL B9K
  HPET DELL B9K
  STARTING DELL B9K
  MCFG DELL B9K
  SSDT DELL st_ex
  ASF! REFERENCE DELL B9K
  TCPA DELL B9K
  DELL SLIC B9K

  Your report does not indicate that a problem.

  Have you installed a new hardware or software since you started facing this problem?

  Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

  What Antivirus utility you installed?

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  then

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• This code were not run if an error occurs?

  I created a script to remove tables as below.
  

   DECLARE
      v_sql VARCHAR2(4000);
   BEGIN
       FOR obj IN (select table_name from user_tables) 
    LOOP
        v_sql := 'drop table  ' || obj.tablename';
        dbms_output.put_line(v_sql);
     EXECUTE IMMEDIATE v_sql;
      END LOOP;
    END;

  But, if oracle encounters an error, say an error like
  

  ORA-02449: unique/primary keys in table referenced by foreign keys

  This code will break out of the loop and stop the execution. Right?

  After getting the typo is included in your example:

  -ORA-01756: city not properly finished chain
  -component 'TABLENAME' must be declared

  The answer to your question is: right, but you could have tested this easily yourself of course.

  SQL> select constraint_name, constraint_type, table_name from all_constraints where table_name in ('TABLE1', 'TABLE2');
  
  CONSTRAINT_NAME                C TABLE_NAME
  ------------------------------ - ------------------------------
  SYS_C0020788                   P TABLE1
  C1                             R TABLE1
  SYS_C0020789                   P TABLE2
  C2                             R TABLE2
  
  4 rows selected.
  
  Elapsed: 00:00:00.21
  SQL> DECLARE
    2      v_sql VARCHAR2(4000);
    3   BEGIN
    4       FOR obj IN (select table_name from user_tables)
    5  .
  SQL> DECLARE
    2      v_sql VARCHAR2(4000);
    3   BEGIN
    4       FOR obj IN (select table_name from user_tables where table_name in  ('TABLE1', 'TABLE2'))
    5  LOOP
    6        v_sql := 'drop table  ' || obj.tablename';
    7        dbms_output.put_line(v_sql);
    8     EXECUTE IMMEDIATE v_sql;
    9      END LOOP;
   10    END;
   11  /
  ERROR:
  ORA-01756: quoted string not properly terminated
  
  Elapsed: 00:00:00.11
  SQL> DECLARE
    2      v_sql VARCHAR2(4000);
    3   BEGIN
    4       FOR obj IN (select table_name from user_tables where table_name in  ('TABLE1', 'TABLE2'))
    5  LOOP
    6     v_sql := 'drop table  ' || obj.tablename;
    7        dbms_output.put_line(v_sql);
    8     EXECUTE IMMEDIATE v_sql;
    9      END LOOP;
   10    END;
   11  /
     v_sql := 'drop table  ' || obj.tablename;
                                    *
  ERROR at line 6:
  ORA-06550: line 6, column 35:
  PLS-00302: component 'TABLENAME' must be declared
  ORA-06550: line 6, column 4:
  PL/SQL: Statement ignored
  
  Elapsed: 00:00:00.07
  SQL>  DECLARE
    2        v_sql VARCHAR2(4000);
    3     BEGIN
    4         FOR obj IN (select table_name from user_tables where table_name in  ('TABLE1', 'TABLE2'))
    5    LOOP
    6          v_sql := 'drop table  ' || obj.table_name;
    7         dbms_output.put_line(v_sql);
    8      EXECUTE IMMEDIATE v_sql;
    9       END LOOP;
   10     END;
   11  /
  drop table  TABLE2
   DECLARE
  *
  ERROR at line 1:
  ORA-02449: unique/primary keys in table referenced by foreign keys
  ORA-06512: at line 8
  
  Elapsed: 00:00:00.23
  SQL> desc table1
   Name
   ----------------------------------------------------------------------
   COL1
   COL2                                                                   
  
  SQL> desc table2
   Name
   ----------------------------------------------------------------------
   COL1
   COL2                                                                   
  

• This computer is not configured and wireless adapter.

  I have a HP Pavilion laptop dv2500 2 year, with the operating system is Windows Vista Home Premium. After achieving a system recovery and do all the windows and updates of the network adapter driver HP, I use the Network Wizard HP (HPNA) to implement the wireless connection, but the technology can not find wireless WiFi adapter in my laptop and so I don't have a wireless connection to Internet now. The blue wireless light is turned on. I check the network adapters in the Device Manager and can not find the wireless adapter. I have no problem in the Wi Fi connection with my laptop before I made the recovery of the system.  Now, I have to use the Ethernet cable to get internet via my D-Link router. The provider of Internet access high-speed is Telus (DSL). The wireless adapter does not work or the mother board is malfunctioning?  Can someone please suggest a solution to this problem. MapleBridge

  I think that you have diagnosed correctly.  It would be convenient if you could try another card before you buy a (maybe borrow one from a friend) and also check this adapter on another computer to see if she works there (so it can't be defective or it may simply decide to work at that moment), but as the material, you should be able to return everything you buy If she has problems. Make sure that it is compatible with your version of Vista.  I think a USB connector will very well - many people use them and I hear of any particular problem they that do not occur with all different types of devices.  It'll probably be easier to install.  Do not throw the power adapter - it may be useful someday as a spare because it does work from time to time. Mine is built into my laptop and my other laptop using a PCMCIA card (and gave me all the problems) so I can't comment from personal experience on what you have or are considering long-term (I don't count the customers - I'm not here long enough to properly evaluate).

  Good luck and best wishes.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I keep trying to download but I get this message: could not install Creative cloud [Error Code 1]

  Ive tried reinstalling 1000 s of times but still the same error:

  Cannot install Desktop creative cloud [error Code 1]

  Error: "unable to install". Creative cloud office

• Your device is not configured correctly(code 1) error

  Hello

  I have windows XP currently installed on my computer and I also have the new hard drive (seagate 500 gb) installed on my computer.
  I am facing the error with my cell phone (samsung galaxy s duos GT s7562) with my computer and I am unable to make any transfer of media through the PSG.
  Under portable devices > PSG > properties, I get the following message. > "this device is not configured correctly. (Code 1)
  To reinstall the drivers for this device, click on reinstall. When I try update driver it shows "your device is not configured correctly (code 1 error). I tried gel and reinstall driver MTP via "scan for hardware changes", but it does not yet solve my problem.
  How can I get my samsung android smart phone connected to my pc and start sharing media through the PSG. problem certainly lies in the pc.
  Help me out.i am going nuts about that...
  Pankaj.

  Hey,.

  have you found this KB link?

  See "Code 1" from the link

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123/en-us

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.