ThorLabs DET10A connection in coupling AC 50 ohms digitizer

Similar Questions

• iPhone connection 7 Bluetooth Watch

  My iPhone 7 keeps randomly lose connection Apple Watch, even when he is in the range. I keep reseting Bluetooth, but it doesn't seem to help. Anyone else having these issues and suggestions?

  Thank you

  Hi imelly,

  Congratulations on your new iPhone 7! I understand that you are having difficulties keeping your Apple Watch paired with your new iPhone. I know it's nice to have all your equipment work well together, so I'm happy to help you.

  Looks like you've got a very good start with the troubleshooting, you've already tried. Learn troubleshooting tips we offer here:
  If your Apple Watch is not connected or coupled with your iPhone - Apple supports

  Thank you for using communities Support from Apple. See you soon!

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• Project does not connect as EXE, is it LVOOP?

  I have lived arcfhitectural huge changes in the course of the past few weeks and finally opted for a starting point. I decided that I will start by building an EXE to talk to my RMC75 of Delta movement. The drivers for it are certified Plug-and-play and I have used before with success, but never turned this project into an EXE file.

  I run the VI of highest level and everything works great. I build the executable and it generates error-free. I run the executable and it runs without error, but it doesn't connect. It does not even wait 3 seconds for a timeout of the connection VI, happening just right through it like it isn't there. And then none of the drivers inside the loop error, which they obviously do, because there is no connection.

  The reason why I'm sure that there is no connection that is immediately when you connect, a couple of relay start to make noise and things begin to sing, which does not occur when you run the EXE file. He acts as the driver VI is all absent. The rest of the job functions.

  I'm afraid that it is a result of drivers being written in LVOOP, but I hope I'm just something missing in the application builder. Any thoughts?

  Here is the list of things I've tried:

  1. include the .lvlib that contains all of the drivers in the project. I took it back after reading another thread

  2. I have disabled all the boxes in the additional now exclusions, all polymorphic proceedings and unused members are included

  3 move the destination of dependencies (which contain the .lvlib of pilots). The lvlib is contained here is the 1 reason.

  Apparently it's a bug known with Delta pilots, and they released a patch. Here is the link in case anyone else gets on this:

  http://www.deltamotion.com/dloads/registerdownload.php?id=3708694693fb153e0327a28d904e9aa06d055246

• Connect to virtual machines across multiple servers of connection for internal/external access

  Hello everyone

  My apologies if this is a silly question, but is it possible to have an individual virtual machine or pool accessible through multiple connection servers? Here is my setup and my scenario:

  Connection to server 1 - direct connect active, PCoIP, serving internal users.

  Connection to Server 2 - live disabled connect, RDP, coupled with a security server, serving external users.

  We seek to deploy Wyse PocketCloud on Wireless / 3G iPad so support for users outside the campus of the hospital can access their desktop.  Users will be expected to have office in the same condition as when they were on campus.  Our doctors are attracted to the iPad, then this will be a test for future deployment phase.

  VMS users are controlled by cs 1.  I would like that the possibility for users to directly connect to their virtual machines using PCoIP when they are internal and RDP via security server when they are external.  Is it possible without using a VPN or live with disabilities on cs connect 1?  I tried to add a virtual machine that has already been setup on cs 1 CS 2 but once cs 2 picks up I can connect is no longer the virtual machine through cs 1. Servers will also relay the reconfigure virtual computer every minute, so this is not the right way to do this.  Someone had customers or users who wanted to make something similar to this?  If so, how did you manage?

  Thanks in advance for your comments

  View what version are you running?  In later versions, you can set directly relate to the level of the server.  So now you can simply deploy a replica of your main connection server that runs Live mode while having your other login server in indirect.   This way you can have a view environment and run your desired configuration.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Satellite M40 - 142, stereo audio input

  I can 'stereo' record through the microphone in Satellite M40 - 142?
  It is possible to have a line-input/output stereo or mono only?

  Hello

  As far as I know the line output (headphone jack) allows the connection of stereo headphones (16 Ohm min.) or a different audio output device. When you connect headphones, the internal speaker is automatically disabled. The input line (Jack Microphone) allows to connect a monaural microphone or other audio input device.

  Good bye

• Cannot increase the RAM in end-15 27 "iMac, retina

  This question drove me crazy.

  End of last year, I bought an iMac 27 "new retina (17.1 model) with 16 GB of RAM of factory. I have since decided to upgrade to 32 GB myself - but apparently not.

  I tried both levels of separate module of Crucial (both sticks 2x8GB, configured by using memory widget Crucial own the latter, so I think it was the 'right' RAM). Both times, after the installation, my iMac would not start. I get the kernel panic, then reboot after reboot goes no further than the Apple logo.

  Conjecturing that it must be a problem with Crucial RAM, I ordered two modules from OWC. This time, I realized an online chat with a Counsellor OWC just to make sure that the triple, I was getting the right modules.

  Result: same kernel panics, same inability to start. After you have uninstalled the aftermarket RAM my iMac works fine.

  And, Yes, I want to install RAM correctly (I did several times with previous computers that are much more difficult to upgrade). I also tried the papillotes in different slots (lots of combinations), switch reset PRAM, etc. etc. Nothing works.

  I wonder... all the stories of 'success' on Amazon and Crucial and OWC come people who completely REPLACE their factory in RAM with spare sticks? Seriously, I think that the issue is an incompatibility with the aftermarket RAM and the factory stuff. On the other hand, I am reluctant to throw 16 GB of perfectly good 'Apple' RAM just to open the four slots for 32 GB OWC.

  I know that Crucial has been (or is still) a provider of RAM to Apple, so this is really surprising.

  It is interesting to try to pick up sticks 'factory' (which will be costly, of course)? I believe that my 'Apple' RAM made by Samsung. Is there a reliable source for this?

  Or I'm doing something completely wrong? (Can't imagine what it would be. I've even been through a chat tech with OWC has nothing to help).

  In fact, I wonder if I now won't be able to max out my RAM (assuming I decide to eBay my Apple sticks and just go all new).

  Difficult for me to believe that the iMac is that picky about RAM...

  Thanks for the ideas.

  I do not have a 2015 end iMac, so I don't know if the problem which arose with iMac 2010 might be similar; before connecting a couple of these very long old threads, most of the problems was: the iMac 27 "would go happily with factory all the RAM, or with less of a mix of OEM and third party RAM (12 GB) max, but would have problems with 16 GB of third party RAM maxed out. I used to have a such 2010 and stayed with a total of 12 GB of RAM (OEM 4 GB and 8 GB of RAM from OWC) worked well.

  Problem with 16 GB on 2010 iMac 27 "i5 & i7.

  I7 memory issues new iMac 27 "2010

  Other than the usual suspects such as faulty RAM, RAM slot, or not seated correctly, if you have time, you might want to try to install unless the maximum - it is a shot in the dark, but...

• problem of sudden wifi with iphone 4S

  Hello

  a few days ago, my iPhone 4S does not receive more an IP address from a DHCP server, even for all the WIFI networks, with that I use for work.

  WIFI authentication is OK, but is never received from IP (or other information received from the DHCP server).

  Someone at - he already experienced this?

  Any idea?

  Already used the 'forgotten network?' and enter the parameters for connection a couple of times, same result.

  Thank you very much

  Dominique

  Hi dofas,.

  Here are a few troubleshooting steps for the problem you are having with your Wi - Fi connection.  I've highlighted some key information.  Click on the link for more details.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  Still not connect?

  Reset your network settings. Tap Settings > General > reset > reset network settings. This resets also Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before

  • If you are connected to a Wi - Fi network, but you can't get online, try to use your Wi - Fi network on other devices. If you can't get online using your other devices, there could be an interruption of the service. Call your internet provider cable or the assistance company.
  • Try to connect to a Wi - Fi network in a different location. If your device can connect, you will need to get help with your Wi - Fi network. If it cannot connect to Wi - Fi networks, contact Apple.
  • Update your Wi - Fi router with the latest firmware and check that the router supports your Apple product. For more information, contact the manufacturer of your router.

  Recommended settings for the WiFi routers and access points
  https://support.Apple.com/en-us/HT202068

  DHCP

  The DHCP Dynamic Host Configuration Protocol () assigns addresses that identify devices on your network. Once awarded, devices use these addresses to communicate with each other and with computers on the Internet. The functionality of a DHCP server can be considered similar to a telephone company distributing phone numbers, that clients then use to call other people.

  Value: a single DHCP server by network

  Details: There is only one DHCP server on your network. This DHCP server can be integrated into your modem cable or DSL, a stand-alone, or integrated into your router Wi - Fi router. In all cases, only one device should act as a DHCP server on your network. If several devices has activated, you will probably see to address conflicts and issues of access to the Internet or other resources on your network.

  Take care

• Wiring of a NI 9237 and a torque transducer

  Dear all

  Newbie to these forums and equipment OR in general

  I have a module OR 9237 and Labview using 2014. Recently, I managed to connect a couple of load cells to the NI 9237 and VI I built so that it works very well!

  Now, I use a torque sensor and I was wondering if the NI 9237 is suitable for my piece of equipment?

  I enclose the reference data sheet and the transducer that I have is the RT2A 5NM. There are a few areas that interest me on the datasheet are: (and please be gentl if these are simple assumptions or biases, I do).

  (1) the rated power is of +/-10V

  (2) the suggested nominal power is 15 - 24V (the NI9237 can provide this voltage?)

  (3) the connection of the power cables seems to depend on the power supply voltage to the output voltage? (is it safe for the NI9237)

  For point 1 in particular I can't seem to find any calibration for scaling? or are the transducers of torque generally considered a linear relationship between the highest voltage and the highest measure of possible couple?

  Sorry if this all sounds pretty basic questions, the 9237 was module quite expensive so don't want to really rely on trial and error to build my next code?

  Thanks for reading this post!

  Hello world

  Just to let you know.

  Spoke the manufacturer. It is fairly standard if a transducer unit is already amplified and producing a voltage reasonable result such as + or - 10V. Then, the requirements are that you will ony need a data acquisition scalable to change the voltage in torque values.

  In my case the torque-meter has been calibrated at the factory to read up to 5 nm and therefore the maximum 10V output voltage will be the equivalent of 5 nm. The torque/tension relationship is generally linear. So, for every volt should be the equivalent of 0.5Nm. The calbration manufacturer shows that standardized resting voltage is approximately 0.001V.

  The voltage is relevant as an integrated amplifier in the sensor so the provider is a little higher than 15 - 24V rather than normal 2.5 - 10V requiring no amplified transducers. The NI9237 can provide a voltage higher than so a separate voltage must be applied. The voltage range is relevant only when certain factors such as the length of the cable and the amount of interference become apparent. As a general rule, use voltage as little as possible is the best that the actual voltage used by the transducer is normally regulated internally so if providing 15 or 24V won't have much impact (except if you have the above conditions).

  Hope that helps

• Symbol of the constant 'thought '.

  My cursor indicates a "symbol of circular wait" as if the computer is thinking.  Everything works fine, but the symbol appears intermittently.  How can I get it to go?

  Could be several reasons.  Out of memory if the machine is constantly writing data to and from memory to disk, slow internet connection, fragmented, (coupled with the lack of memory) insufficient swap space, the old machine - we have no way of telling.

  Lack of memory could be due to too many processes running at once.

  Press CTRL-ALT-DEL and select Task Manager.

  Select the performance tab and which will show you your CPU usage and the memory usage.  If use figures are close to the maximum, then you have an idea of the problem.  Try to close as many programs as you can to see if it improves matters.

• Measurement of voltage with NEITHER - 9203

  Hello

  Is it possible to use the NI9203 card for voltage? I need to replace one of the pressure sensors that has output of sensor that has a single output voltage current and there is not any card with entrance to the machine. In the data sheet there is a block diagram of the input circuit of the card where R 138 Ohm is connected to COM. So, if I connect R aprrox. 360 ohms in series to the input card that I will get a voltage divider that will transform the voltage of 0 - 10V, 0-20mA current. It will work properly?

  Thank you very much for the help!

  Jan,

  In theory, adding the external series resistance should work.  I hope that it is a fairly short cable length and not a real noisy.  You will need to check that the new sensor is able to drive a load of 20mA.  You will need to take the resistance of the wiring etc. account when setting this up.

• My computer isn't letting me log on to my other user accounts.

  The main login screen is completely different. Now it is only a small window with my moms user account name and a space for a password. I have no possibility to change account.

  I did nothing to my computer in a week. I have connected a couple times on my moms account so it is connected for some time. When it was first locked, it is an administrator account. I could go and watch my other accounts, but there was no way to logon. Unfortunately, I thought that if I changed my moms for a limited account account, that it would change to the normal login screen. There can be no. It's always the same small window and it connects only to my mother. Although this time, I am unable to view my other accounts. It seems that there is only one account on my computer so I can only show my moms.
  This is getting very frustrating. I have no idea what to do and I have not seen any other problem like mine. My computer is not locked or anything... it shows only one account. My documents are on my user account (which is an administrator). I have my music (itunes) and other important things. I really hope that I'm not all that or I really hope that I have not already lost. I honestly have no idea what to do. So please reply and help me with this. I need to get on my account.
  Not sure if this will help, but my computer is a Dell and it's an Inspiron 1525.
  Please answer.

  Hello

  See if a Safe Mode system restore everything going to how it was:

  1 do a Safe Mode system restore to before the problem:

  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Enter the Mode Windows safe. Use the arrow keys to navigate and the ENTER key to select Mode

  http://www.computerhope.com/issues/chsafe.htm#03

  See you soon.

• Password suddenly not accepted

  I have my computer, Windows Vista, set up with multiple users. One for each Member of the family. Mine is the admin. I connected a couple of times this morning very well. Now, all of a sudden, my password isn't accespted more. I don't have a disc composed password. I checked the CAP locks I found in another thread that I should have separate admin account and not a day use a. Everything I try on another account to enter the mine application password admin and who is not accepted here either. My Toddler could do something while I was out of the room? I think it take many measures to make this happen. I CA Internet Security Suite provided by my ISP. Once I get I'm going to make this record and separate my daily user of the admin. But how can I get in?

  Here is a link to Microsofts Policy on of password resets.
  http://support.Microsoft.com/default.aspx/KB/189126

  However, the information below can help you solve the problem.  You must have a Windows Vista DVD to do this, I do not think that a recovery DVDs will work with these instructions.

  B oot on the mode of recovery Windows (WINRE), environment

  -To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.
  -When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.
  -Select the language by default, click Next.
  -Select "repair your computer".
  http://www.Flickr.com/photos/freeed/363935713/in/set-72157594490796701/
  -Select command prompt, and then type the following commands:

  NET user administrator / Active: Yes
  NET user {user account name} {new user password}

  Note: Please enter the user name and the password without the braces of the flower.
  
  -Restart the computer normally.

• Problem VLAN switch X 1026

  I have a few computers connected to the switch which are all able to communicate with each other, when they are not connected to a local network VIRTUAL port. Once I connect a couple of computers to ports VLAN they can talk more to the switch or other.

  It is very convenient that you had an additional switch to test with. The default value of the factory reset is a good step to take. I will also try to Flash the firmware.

  http://Dell.to/2bWqvRH

  If the behavior continues, I agree that it probably needs to be replaced.

• Error unknown Server - cc - cannot open a session

  Hello

  I'm unable to connect to creative cloud due to an "unknown Server error".

  Anyone else get this?

  I tried to reset my password without success however.

  I can't connect on the site of creative cloud, but I can't use creative application of cloud on my desk.

  I tried to connect a couple of times and I tried to restart my machine as well.

  I disabled antivirus just in case, but I can't make it work.

  I already installed the software CC on my machine to work without mistakes like that.

  John

  

  Johnxarc,

  Looks like that you actually typed the comand like "/ Library/Application Support/Adobe/OOBE". When the correct command is "~/Library/Application Support/Adobe/OOBE. Please make sure that when you are to go to the windows folder start address with ~.

  Please try this and let us know.

  Kind regards

  Michael Sharma