Thoughts about to combine two separate projects in CS6?

Similar Questions

• Can combine two separate the AE project files to become a 'real' individual project?

  Can combine two separate the AE project files to become a 'real' individual project? I know that you can import a project into AE. But if you delete the original project your imported (outside), you also delete the project imported into your new project. I could have sworn there was a script or function that does this somewhere...

  Any help would be greatly apprecated.

  Thank you

  Thanks Rick,

  Bad choice of words on my part that I meant what you just described. Thanks for your clarification. However, I found the script I mentioned that if anyone is interested. It's called rd_MergeProjects

  http://Provideocoalition.com/mchristiansen/story/after_effects_script_of_the_week_rd_merge projects

  Kind regards

  Louis

• How to combine two video projects in Windows Movie Maker?

  How to combine two projects?

  I started a project and I would like to import and more old project to combine.

  I guess that you are referring to the project .mswmm files?

  The following steps may be worth a try:

  Reach... File / open project... Select a project file.
  When the project appears on the timeline... go to...
  Edition / select all.

  Open a different project... to... Editing / paste.

  Now the content of the two projects should be on
  the chronology.

  To add more doing the same thing...

  Edition / select all... open a project... Editing / paste

  Another method would be to publish (save) each
  the project in film WMV format and then re-import
  both WMV clips and slide both to the
  timeline. Then, you could publish it as a simple video.

• Combine two Flash project

  Hello!
  
  I have two FLA files and I need to combine
  
  Please tell me how to do...

  I just changed the names of symbols

• How to combine two separate lists of bookmarks?

  Under view-> sidebar-> bookmarks there are a list of L-O-N-G files and bookmarks for individual sites.

  There is ONE ENTRY for "Bookmarks Menu" and following that are TWO independent lists a set of folders and individual bookmarks, and THEN a SECOND set of records is followed by another list of individual bookmarks. None of these sets entries are duplicates of each other.

  How can I merge the two of them, while I have a set of RECORDS, followed by a set of INDIVIDUAL bookmarks - that I can sort the entire list in alphabetical order?

  Currently, when I right click on the Menu "bookmarks" I show options that include choosing "sort by name". When I choose "Sort by name" * ONLY * the first set of RECORDS & INDIVIDUAL bookmark entries are sorted in alphabetical order.

  Ideally, I would like to have the TWO lists be merged and sorted.

  How it happened (the existence of two sets of RECORDS & INDIVIDUAL bookmark lists) I don't know.

  Your help, anyone, help is greatly appreciated.

  Thank you!

  If you sort the folder Menu bookmarks, all the bookmarks below that will be sorted to the extent where a separator - a horizontal line. Remove the separators to fix everything.

• How to combine two separate personalized stamps into a single category categories

  I have two categories of personalized stamps. I want to spend all the stamps of the second category in the first category. I looked at the command manage custom stamps, but that does not offer the ability to move a stamp from one category to the other.

  Is it possible to move from one category to the other stamps in Acrobat Pro XI?

  You can open each file stamp and set the title (file > properties > Description > title) of each PDF in the category you want. Then save, close Acrobat and restart.

• is there a way to create a single video file of two separate video and have their output to two separate projectors?

  I started using the first less than two months ago and my tech video background is rather limited . I'm doing an art project where I am projecting two different projections on a large wall that are designed to be in harmony and interact with each other.   I intend to use two laptops, one for each projector.  This is a possible problem.  The docents Gallery in this gallery of the University will have to turn everything on every morning, having to click on both computers at the same time to synchronize the images play together perfectly.  That simple I'd like to think, I know year 19 former students who are the docents sometimes fail to grasp what is obvious.  Is there a way to take two project files and create a single file that could play for two projectors from a laptop outside?  As a split screen monitors?  That way they click on a button. I don't know if it's possible, it can't be.  I just thought to deal with this problem as possible before that happens.   

  Has ny advice would be greatly appreciated.

  You can create a sequence on the front which is double width. For example, 1280 x 720 (720 p) becomes 2560 x 720, which is TWO 720 p side by side videos in a clip. For reading, you may be able to implement the graphics card settings to do it for you, or - get a Matrox DualHead2Go box. You must set the graphics card in your computer to the display size double width, such as 2560 x 720, and the single output of the computer goes in the DH2G unit, which separates the entry into two outputs independent of 1280 x 720.

  There are many models available, depending on whether you are working analog or digital graphics card. There is a ton of information available, including tools for configuration and testers to run on your system. It is important to seek and choose carefully, to make sure that the connections are compatible and that map display of your computer (and Matrox unit) will support both the specific resolution you are looking for.

  Matrox DualHead2Go Digital SE | Multiple monitors for laptop computers

  Thank you

  Jeff Pulera

  Safe Harbor computers

  www.sharbor.com

• How to remove duplicates in two separate lines in SQL?

  Hello
  
  I need to identify the data in double with two separate lines. See my below data structure.
  INDEX OF NAMES NAME_1 START_DATE END_DATE FLAG VALUE
  B ON 275 SE 13/12/2005-31/12/2010 1
  SELF 1 375
  SELF 1 475
  ON 275 SE 2 B 13/12/2005-31/12/2010
  SELF 2 375
  SELF 2 475
  ON SE 175 13/12/2006 AND 31/12/2010 B 3
  SELF 3 375
  SE ON 3 475
  
  This is my sample data. Here, the data is mirrored with different index columns. INDEX 1 and 2 contains the same combination group. I so need to identify one of the combination double (i.e. INDEX 1 or 2). Anyone can come up with the exact solution?
  
  Thank you

  I thought it had to do with the order of the INDEX field. The query checks only the value of the previous INDEX value.

  I think I found what the problem was.

  Try this:

  with test_table as
  (select 'SUR' NAME, 'SE' NAME_1, '275' VALUE, to_date('13/12/2005','DD/MM/YYYY') START_DATE, to_date('31/12/2010','DD/MM/YYYY') END_DATE, 'B' FLAG, 1 IND from dual union all
  select 'SUR', 'SE', '375', null, null, 'A', 1 from dual union all
  select 'SUR', 'SE', '475', null, null, 'A', 1 from dual union all
  select 'SUR', 'SE', '275', to_date('13/12/2005','DD/MM/YYYY') ,to_date('31/12/2010','DD/MM/YYYY') ,'B', 2 from dual union all
  select 'SUR', 'SE', '375', null, null, 'A', 2 from dual union all
  select 'SUR', 'SE', '475', null, null, 'A', 2 from dual union all
  select 'SUR', 'SE', '175', to_date('13/12/2006','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 3 from dual union all
  select 'SUR', 'SE', '375', null, null, 'A', 3 from dual union all
  select 'SUR', 'SE', '475', null, null, 'A', 3 from dual union all
  select 'SUR', 'SE', 'IPT', to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 100 from dual union all
  select 'SUR', 'SE', '375',null, null, 'A', 100 from dual union all
  select 'SUR', 'SE', 'AO', null, null, 'A', 100 from dual union all
  select 'SUR', 'SE', 'IPT', to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 218 from dual union all
  select 'SUR', 'SE', '375' ,null, null,'A' ,218 from dual union all
  select 'SUR', 'SE', 'AM' ,null, null,'A' ,218 from dual union all
  select 'SUR', 'SE', 'IPT' , to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2008','DD/MM/YYYY'), 'B', 334 from dual union all
  select 'SUR', 'SE', '375' ,null, null,'A', 334 from dual union all
  select 'SUR', 'SE', 'AP',null, null, 'A', 334 from dual union all
  select 'SUR', 'SE', 'IPT' , to_date('01/01/2009','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 335 from dual union all
  select 'SUR', 'SE', '375' ,null, null,'A', 335 from dual union all
  select 'SUR', 'SE', 'AP',null, null, 'A', 335 from dual union all
  select 'SUR', 'SE', 'IPT' , to_date('13/12/2005','DD/MM/YYYY'), to_date('31/12/2010','DD/MM/YYYY'), 'B', 336 from dual union all
  select 'SUR', 'SE', '375' ,null, null,'A', 336 from dual union all
  select 'SUR', 'SE', 'AP',null, null, 'A', 336 from dual)
  SELECT name,
         name_1,
         value,
         start_date,
         end_date,
         flag,
         ind,
         MIN(diff_flag) over(PARTITION BY NAME, NAME_1, IND) min_flag
    FROM (SELECT t3.*,
                 CASE
                   WHEN lag(VALUE, lag_flag)OVER(ORDER BY IND, start_date, VALUE) != VALUE AND flag = 'A' THEN
                    1
                   WHEN (lag(value, lag_flag)OVER(ORDER BY IND, start_date, VALUE) != value
                      OR lag(start_date, lag_flag) OVER(ORDER BY IND, start_date, VALUE) != start_date
                      OR lag(end_date, lag_flag) OVER(ORDER BY IND, start_date, VALUE) != end_date)
                      AND flag = 'B' THEN
                    1
                   WHEN lag_flag = 0 THEN
                    1
                   ELSE
                    2
                   END diff_flag
            FROM (SELECT t2.*,
                         first_value(lag_count_flag) OVER(PARTITION BY NAME, NAME_1, IND
                                                              ORDER BY NAME, NAME_1, start_date) lag_flag
                    FROM (SELECT t1.*,
                                 CASE
                                   WHEN FLAG = 'B' THEN
                                    lag(COUNT, 1, 0)
                                    OVER(ORDER BY IND, start_date, VALUE)
                                 END lag_count_flag
                            FROM (SELECT t.*,
                                         COUNT(*) over(PARTITION BY NAME, NAME_1, IND) COUNT,
                                         row_number() over(PARTITION BY NAME, NAME_1, VALUE,
                                                                        START_DATE, END_DATE, FLAG
                                                               ORDER BY IND) row_number
                                    FROM test_table t) t1) t2) t3) t4
   ORDER BY ind,
            start_date,
            VALUE;
  

  Published by: Manuel Vidigal on Abr 13, 2009 18:18

• How can I keep two separate backups?

  I have Macbook Pro 10.9.5 (Mavericks). I have been using G-drive to make backups with Time Machine. I intend to travel and I want to add an extra backup to take with me, while leaving the original G drive at home. Yesterday I backed up by the new drive (Seagate) and today I am back up with G-drive. I read something about how Time Machine alternates when there are two separate drives. So when I'm traveling and I connect Seagate, it will take the next backup of this drive. But the following will not be G-drive will make it to Seagate. I use Seagate for months while I leave the G-drive at home. How can ensure me that the computer recognizes the good drive and don't think that it's G-Drive Backup for each other backup?

  It will not be because you must create a new time Machine profile through preferences of Time Machine in which you appoint the Seagate for backup, and this is the time of road Machine will use until you change the setting.

• Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

  Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC?  I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

  Thank you!

  No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

  Rob

• interaction between 2 labview programs that are running on two separate computers

  Hello

  I have two separate computers and 2 labview programs that run on each computer. labview program is ready for the acquisition of data and the record of the acquired data in a computer. now, I want to send these data acquired by cable to another computer to be processed. first of all, I'm looking for the best protocol to send data between two computers. It is important for me to diliver data near real time about in miliseconds. and finally it is necessary to have any particular type of software?

  Best regards

  Hi farashi,

  you want "diliver data near real time in miliseconds."

  Even a GigaBit-LAN has latencies of 100 milliseconds...

  When you search for a Protocol, you can read some articles in the knowledge base is located at the Web site of NOR.

  And according to the volume of data, you should consider to send data using DataSocket...

• Set up two separate networks with access to shared resources

  Hi all

  We have a two separate companies in the same building which will both need access to shared resources and the same internet connection. They must be on separate subnets cannot communicate directly with each other. The current switch is a Cisco ESW-520-48P and we are looking to buy an SG-300-20 p for the new entity moving in. Heres how we envisage the establishment:

  • ESW-520 will host network company A. workstations, servers, etc.
  • SG - 300 will be two VLANS. Vlan1 will host any business network (B) workstations, servers, etc. VLAN2 will host shared resources, such as printers.
  • The internet gateway is a system based on UNIX with 3 CARDS. 2 NETWORK cards is absorbed by ADSL connections, while the other card NETWORK LAN, linking to VLAN2 on the SG-300. We would like to define which connection ADSL to carry through according to what subnet traffic is originating.
  • The ESW-520 need access to shared resources and the internet gateway on VLAN2 on the SG-300.

  This will be possible with these two switches? It would be the best way to go about this?

  Appreciate any recommendations that you can provide.

  Thank you

  Tom

  Hi Tom, yes the ESW can be either an access port to the vlan 2, unidentified or you can configure the trunk for the host devices on two subnets on the ESW, your choice. When the SX300 is L3 it will load the intervlan routing when you assign IP addresses for the interfaces of VLAN locally.

  Default gateways will be the SX300 Lass (interface vlan).  There will always be a route established between subnets so assign each vlan an IP address.

  You'll see ARP of course through the subnets of course. Not sure the DHCP acknowledgement, etc..

  -Tom
  Please mark replied messages useful

• help model eText - combining two groups

  Guys, I'm brand new to this and have need help.  I'm trying to take 2 groups of data in my data model and use the columns or elements of these two groups to form a single line of data for each line of joint.

  Here is my layout (the groups are: G_COMPANY_INFO and G_EMP_INFO):

  < name of group = "G_COMPANY_INFO" label = "G_COMPANY_INFO" source = "octanner wl" >

  < element name = 'LOCATION' value = 'LOCATION' label = 'LOCATION' dataType = "xsd: String" breakOrder = "" fieldOrder = "2" / > "

  < element name = "Company" value = 'COMPANY_NAME' label = 'COMPANY_NAME' dataType = "xsd: String" breakOrder = "" fieldOrder = "3" / > "

  < element name = "ATTENTION_LINE" value = "ATTENTION_LINE" label = "ATTENTION_LINE" dataType = "xsd: String" breakOrder = "" fieldOrder = "4" / > "

  < element name = "ADDRESS_LINE_ONE" value = "ADDRESS_LINE_ONE" label = "ADDRESS_LINE_ONE" dataType = "xsd: String" breakOrder = "" fieldOrder = "5" / > "

  < element name = "ADDRESS_LINE_TWO" value = "ADDRESS_LINE_TWO" label = "ADDRESS_LINE_TWO" dataType = "xsd: String" breakOrder = "" fieldOrder = "6" / > "

  < element name = "Adresse_rue" value = "Adresse_rue" label = "Adresse_rue" dataType = "xsd: String" breakOrder = "" fieldOrder = "7" / > "

  < element name = 'CITY' value = 'CITY' label = 'CITY' dataType = "xsd: String" breakOrder = "" fieldOrder = "8" / > "

  < element name = "STATE" value = "STATE" label = "STATE" dataType = "xsd: String" breakOrder = "" fieldOrder = "9" / > "

  < element name = "ZIP" value = "ZIP" label = "ZIP" dataType = "xsd: Integer" breakOrder = "" fieldOrder = "10" / > "

  < element name = 'COUNTRY' value = 'COUNTRY' label = 'COUNTRY' dataType = "xsd: String" breakOrder = "" fieldOrder = "11" / > "

  < element name = "EMAIL" value = "EMAIL" label = "EMAIL" dataType = "xsd: String" breakOrder = "" fieldOrder = "12" / > "

  < element name = "TELEPHONE_NUMBER' value = 'TELEPHONE_NUMBER" label = "TELEPHONE_NUMBER" dataType = "xsd: date" breakOrder = "" fieldOrder = "13" formatMask = "" / > "

  < element name = "FAX_NUMBER" value = "FAX_NUMBER" label = "FAX_NUMBER" dataType = "xsd: String" breakOrder = "" fieldOrder = "14" / > "

  < element name = "PO_ADDRESS_LINE_ONE" value = "PO_ADDRESS_LINE_ONE" label = "PO_ADDRESS_LINE_ONE" dataType = "xsd: String" breakOrder = "" fieldOrder = "15" / > "

  < element name = "PO_ADDRESS_LINE_TWO" value = "PO_ADDRESS_LINE_TWO" label = "PO_ADDRESS_LINE_TWO" dataType = "xsd: String" breakOrder = "" fieldOrder = "16" / > "

  < element name = "PO_STREET_ADDRESS" value = "PO_STREET_ADDRESS" label = "PO_STREET_ADDRESS" dataType = "xsd: String" breakOrder = "" fieldOrder = "17" / > "

  < element name = "PO_CITY" value = "PO_CITY" label = "PO_CITY" dataType = "xsd: String" breakOrder = "" fieldOrder = "18" / > "

  < element name = "PO_STATE" value = "PO_STATE" label = "PO_STATE" dataType = "xsd: String" breakOrder = "" fieldOrder = "19" / > "

  < element name = "PO_ZIP" value = "PO_ZIP" label = "PO_ZIP" dataType = "xsd: Integer" breakOrder = "" fieldOrder = "20" / > "

  < name of group = "G_EMP_INFO" label = "G_EMP_INFO" source = "DM-Octanner text file" >

  < element name = "BU_NAME" value = "BU_NAME" label = "BU_NAME" dataType = "xsd: String" breakOrder = "" fieldOrder = "1" / > "

  < element name = "INTERNAL_LOCATION_CODE" value = "INTERNAL_LOCATION_CODE" label = "INTERNAL_LOCATION_CODE" dataType = "xsd: String" breakOrder = "" fieldOrder = "2" / > "

  < element name = "PERSON_NUMBER" value = "PERSON_NUMBER" label = "PERSON_NUMBER" dataType = "xsd: String" breakOrder = "" fieldOrder = "3" / > "

  < element name = "LAST_NAME" value = "LAST_NAME" label = "LAST_NAME" dataType = "xsd: String" breakOrder = "" fieldOrder = "4" / > "

  < element name = "FirstName" value = "First name" label = "First name" dataType = "xsd: String" breakOrder = "" fieldOrder = "5" / > "

  < element name = "DEPARTMENT_CODE" value = "DEPARTMENT_CODE" label = "DEPARTMENT_CODE" dataType = "xsd: String" breakOrder = "" fieldOrder = "7" / > "

  < element name = "NEXT_ANNIV_DATE" value = "NEXT_ANNIV_DATE" label = "NEXT_ANNIV_DATE" dataType = "xsd: date" breakOrder = "" fieldOrder = "9" formatMask = "" / > "

  < element name = "ANNIV_YEARS_OF_SERVICE" value = "ANNIV_YEARS_OF_SERVICE" label = "ANNIV_YEARS_OF_SERVICE" dataType = "xsd: double" breakOrder = "" fieldOrder = "10" / > "

  < element name = "NEXT_SAL_REVIEW_DATE" value = "NEXT_SAL_REVIEW_DATE" label = "NEXT_SAL_REVIEW_DATE" dataType = "xsd: date" breakOrder = "" fieldOrder = "11" formatMask = "" / > "

  < element name = "GENDER" value = "GENDER" label = "GENDER" dataType = "xsd: String" breakOrder = "" fieldOrder = "8" / > "

  < element name = "MIDDLE_NAMES" value = "MIDDLE_NAMES" label = "MIDDLE_NAMES" dataType = "xsd: String" breakOrder = "" fieldOrder = "6" / > "

  < / Group >

  < / Group >

  My etext model looks like this:

  

  I am trying to get a line that looks like this output:

  NAME OF THE COMPANY 0000125877COR LOC JONES, JOHN J.

  < lines... more >

  I can't just to get ONE or other groups, but not both.

  I thought about it through a friend.

  You must use '... /' previously set columns in the parent folder.  So, my model is as follows:

  

  In addition, only have on the child group.  I took it to G_COMPANY_INFO.

  I hope this helps someone else who's trying to do.

• Can I create a fusion help out of two existing projects?

  I have a project RH11 existing (project A) located on the control of Source of RoboHelp.  It is called within the software, it is written for.  My company has developed a software add-on to the original software.  I have about 30% of the aid for the add-on (project B) completed, but is not in Source code control.  The developer's of informs me that the help file must be a help. (I asked this question at the beginning).  Is it possible for me to create a merged project help on two existing projects and it controls Source code?  I created merged help before so I have some familiarity with it. I have RoboHelp of Peter Grainge, creation of site bookmarked.

  Thanks in advance for any direction you can provide.

  We need to know what the developer means by "assistance". Merged help is two or more projects, each with their own production which can be called independently, but can also be made to appear as on the output.

  If that satisfied the stipulation of the developer, then Yes you can configure your existing projects to do. Such parent described on my site would be empty and your two projects would be the child projects. Each of them would be in source code control.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Alternation of two separate CC accounts on one computer

  I have question about the alternating use of CC's two separate accounts on the same computer. I currently have an annual subscription to the account which I use for my own work internal freelancing on a computer company to the private sector and another separate account that is provided by an external employer on site.

  When working off-site for the outside employer, are there known problems that may arise if I log out of my private home business account and log in Adobe ID of the employer on the same computer? Basically, I want to be able to access, create, and collaborate with Adobe CC library of content specific to the outside employer while working at home on some occasions. I rely on my accounts CC to synchronize all my workspace settings and preferences that are slightly different between these two accounts. Basically, no matter which never really tested the functionality and reliability of switching between the two pieces of identification separate Adobe on the same computer while maintaining the integrity of the unique preferences, put in space of CC library content work?

  I just wanted to ask before trying anything.

  Thank you!

  your settings synchronized and cc and cc content library file will be separated for each id should not be a problem.