Thousands of dupe file... winsxs or program file Win 7

Similar Questions

• Windows 7 continues to write thousands of jpg files on c:\windows\serviceprofiles\networkservice\appdata\local\microsoft\media player\art cache\localmls subdirectory in the form of system files.

  Let me describe what is happening. I used the 'get info' in iTunes to add various jpg work at the individual level of CD (i.e. selecting song at the same time) multiple.  ITunes displays the work very well and works very well. Over a period of time, I noticed deterioration in system performance and when I tried to create a disc using CMS Bounceback Ultimate image has noticed that the number of files on my hard drive had increased from 250,000 to about 1 000 000. After much research and a bit of luck, I determined that Windows 7 has written these JPGs repeatedly in the subdirectory cache\localmls of c:\windows\serviceprofiles\networkservice\appdata\local\microsoft\media player\art. These are the same files jpg, I added in iTunes. When I discovered, there are about 700,000 of these small files in this subdirectory in the form of system files which are hidden files. I was able to remove these files first reset file attributes (attrib s h - r *.jpg) and using the del command. Unfortunately, the system continues to write the same files in the same sub and a few hours, I have thousands of these files written again. I checked the system for virus/malware using the latest versions of sophos, malwarebytes, and spy hunter. There is no malware reported by one of these programs.  I also stopped Sophos and tried again but the problem persists. I have also rebuilt iTunes library by following the steps described by Apple, but this does not solve the problem. Any suggestions I can try next?

  "Turn off"Windows Media Player Network Sharing Service"seemed, if stop it... for now =)"

  Lack of disk space (windows 7)
  http://forums.techguy.org/Windows-7/920441-missing-hard-drive-space-Windows.html

  Microsoft.public.Multimedia.Windows.MediaPlayer
  http://groups.Google.com/group/Microsoft.public.multimedia.Windows.MediaPlayer/browse_thread/thread/b4593bd2d12cec0f?TVC=2

  http://www.Google.com.au/search?q=c%3A%5Cwindows%5Cserviceprofiles%5Cnetworkservice%5Cappdata%5Clocal%5Cmicrosoft%5Cmedia+player%5Cart+cache%5Clocalmls&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = Bt99TMivOM2PcffGtcgJ

  If not, perhaps, you create a batch file to run at startup or schedule tasks to remove *.jpg files that appear in this folder?

  An approximate example of a batch file would be in this sense. It would be created in Notepad but recorded in a .bat file.

  C:
  CD "windows\serviceprofiles\networkservice\appdata\local\microsoft\media player\art cache\localmls".
  DEL *.jpg

  pause

  This is only a rough guide and may need a lot of amendments by you that I'm not familiar with batch files, but it shouldn't be too hard to do.  The batch by operating manually or in scheduled tasks file would need administrative privileges or the localmls access permissions set properly for the user.

• Windows Explorer crashes when I remove thousands of small files.

  Not sure if it is a known problem, but windows Explorer tends to crash on me when I delete thousands of small files.  Can you help me?

  Hello social media - AndrewA.

  Thank you for visiting the answers from Microsoft Windows 7 Forums.

  I have some steps that may help you.

  Step 1

  Perform a clean boot and check if the problem persists. Clean boot starts the operating system by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) Perform Clean boot (check the link to perform the clean boot).

  (2) enable half the services.

  (3) determine if the problem comes back.

  (4) enable half of the startup items.

  (5) determine if the problem comes back.

  (6) repeat the steps above until you find out which program or service is causing the problem.

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135.

  Step 2

  Run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button.

  2. on the Start Menu, click all programs followed by accessories.

  3. in the menu accessories, right-click on command line option.

  4. in the drop-down menu that appears, click the "Run as Administrator" option.

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press ENTER.

  7. a message is displayed indicating that "the system scan will start.

  8. be patient because the analysis may take some time.

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue.

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Step 3

  Run a virus scan online because it causes sometimes caused by viruses.

  See the links below:

  http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• printer HP psc download file win.ini recognition range queries

  I followed all directions of HP to download the driver for hp psc 1210 xi, but at the end of the installation, it gives a code 1913 and ask for verification of the win.ini file, which I can not locate. He asked that this converted file to 'read only' I need help!

  Hello

  • If it works much earlier?
  You can view these methods:
   
  Method 1:
   
  Change the attribute to read-only for the Win.ini file
  
  To change the attributes of the Win.ini file, follow these steps:
   
  1. find the Windows directory on your computer.
  2. in the Windows directory, locate the Win.ini file, and right-click the file. In the menu that appears, click Properties.
  3. in the Properties dialog box, in the attributes section, make sure that the read-only check box is not selected. If the check box is selected, click the check box to disable, and then click OK.
  4. run the Setup again.
   
  Method 2:
   
  Rename the Win.ini file and install the printer driver
   
  1. find the Windows directory on your computer.
  2. in the Windows directory, locate the Win.ini file, and right-click on the file. In the menu that appears, click Rename.
  3 type win.old, and press ENTER.
  4 restart the computer.
  5 install the Setup program.
  6. Repeat steps 1 and 2 and rename the file Win.ini file.
  7 restart the computer.

  See also:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01524762&LC=en&cc=at&DLC=en&product=90767#n418

• Can I delete program files Win XP Autocomplete Pro dangerous?

  Seizure semi-automatic Pro is extremely dangerous, store personal information forms, which can be hacked, I don't just want to turn it off, I want to remove the program file. Deletion will cause problems with Win XP or IE8?

  There is a program called "autocomplete pro" that would have been asked to download and install in windows.

  However, there is also a feature integrated into the browser known simply as 'AutoComplete '.

  regarding the feature, here's a Web page with info and links page to other articles on the feature disabling and disabling the data it accumulates:

  http://answers.recipester.org/question/11233/how-to-disable-AutoComplete-in-Hotmail

  with respect to the program, here is the url entered AutoComplete pro.  She mentions the use of the Add/Remove Control Panel.  but as you pointed out it is not an entry for it.  If, however, the program has been installed manually, then it can have a parent under c:\program files.  If so, then delete the files and folders for the assurance that it is incapaticated:

  http://www.autocompletepro.com/FAQ.aspx#Na4

  HTH

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > DatabaseBen, Retired Professional - Analyst - database developer - accounting - l'[email protected] veteran 'share nirvana mann' - dbZen ~ ~ ~ >

• Rename thousands of music files

  Hello

  I have a few thousand Mp3s I want to rename. Currently, they are all named as follows:

  01 breakout
  05 Photobooth
  13 high and dry

  I want to delete the number of the file name so that it is just the name of the track. Is it possible to rename all without making them individually. All Mp3s are in separate folders sorted by band name and album name so they are not all in a single folder.

  Any help with this would be much appreciated.

  Thanks in advance,

  Johnny

  Hi Johnny,.

  You cannot rename several files that that are in different folders. However, it is possible to rename several files in the same folder.

  If you give the same type of the same name files, each file will have the same name followed by a different sequential number (for example, file renamed (2), renamed file (3) and so on).

  To do this, select all the files you want to rename, and follow the same steps as you would to rename an individual file. Each file will be saved with the new name and a different sequential number will be automatically added at the end of each file name.

  For more information, see the link below

   

  Rename a file

  http://Windows.Microsoft.com/en-us/Windows-Vista/rename-a-file

  Select multiple files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/select-multiple-files-or-folders

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Thousands of PES files in the root folder of drive D?

  I'm under PSE 13 on a Windows 7 system. I was shocked and horrified to discover, after use of PSE 13 days that the root folder of my D: drive where I have installed PSE13 has nearly SEVEN THOUSAND files! These are for the most part of the xml, bmp, jpg, psd, mp4 and .gif files. It is an absolute no no prospects of a good Windows file system management. Applications should NEVER store hundreds or thousands of files in the folder root of the drive, one. That is why the sous-sous-sous-dossiers/sous-sous-sous-repertoires.  Can you imagine the chaos if every application developer did it?

  More surely there be a way to specify where these organizing files can be stored and place them in the folder of my hard disk where they are absolutely not?

  mxgordon wrote:

  ... Unless it started in PES 11 I had installed before the upgrade to 13, however, when 11 was installed, it's all on the C: drive. I pass the process of conversion of the catalogue of 11 to 13.

  The files usually have names like 'B0000000.pref', 'B0000002', 'B0000005.dat', B0000006.xml, 'B0003495.xml', 'B0003496.bmp', ' "B0006834."» "JPG", "B0006816.psd" and a huge 2 GB of files "Photoshop Temp2287141416368".

  What you show, it is the content of a backup folder. It's a pretty common problem to find all the files in a folder root of a drive when the destination of the backup folder was not specified, the drive letter.

  A backup folder contains files renamed image as "". B000000 ". "JPG", where the suffix is maintained. All the other files and subfolders are renamed in the original catalog file. More important still, the backup folder contains the two most important files, "catalog.buc"(a copy renamed your database "catalog.pse11db" and a "backup.tly" file that contains all the information to rename the files and store them in their structure of tree of file origin of the command of the "restoration" of the Organizer. Catalog backup file is usually created on an external EHD. The restoration process normally allows you to set the location of the main folder on the backup drive. Users don't often specify a folder to create for this purpose; I always recommend to create the backup folder before the restore process.

  Your case is a little more complicated due to several factors:

  -you have converted from version 11 to 13

  -you have installed an SSD

  -you have installed software elements on D: which is something not 1% of typical users will do.

  This and your answer shows that you and only you can find what you've done to get the contents of a backup in the root folder. The answer requires you to remember all of the previous steps, you have done to convert the backup and migrate to the D: drive.

  What is not clear to me of your two different messages, is if the problem is to find files cumbersome and unnecessary in the root or folder if you have also problems with your catalogs and library of image files. If you have no problem to remove unwanted files from the root folder, you simply use Explorer to delete all files starting with "B00" over the catalog.buc and backup.tly file. Instead of delete, you can even move them to a newly created folder: this will create a valid backup folder.

  Thanks in advance for your comments, they can be very useful for other users.

• Executable WMPLAYER disappeared? It is not Program Files/Win Med player. Unable to start the Player Wind Med?

  I use Windows XP Home Edition, version 2002, service Pack 2
  Windows Media Player 11 was running.
  Watch "Add / Remove Programs" the system thinks it is still installed and gives me the possibility to the United-insta Nations

  I recently loaded Acer edisplay management software for new Acer moniter purchased.
  I recently tried to load the adobe flash player, but he has not installed correctly.

  Usually after the put in a CD a dialog with Windows Media Player as one of the choices to play the CD.
  Windows Media Player is more a choice in the dialog box.

  The ICON is for Windows Media Player is no longer on the desktop. It's almost as if someone came in and uninstalled Windows Media Player.

  AJohnson

  Start the player from here:

  C:"%ProgramFiles%\Windows Media Player\wmplayer.exe and create a shortcut as well

• Combine dupe files to one, where <>data becomes new field (s)

  My brain seems to have a rough with this concept, even though it's really not that complicated. What I have is a list of "membership" (we provided) and for some strange reason, instead of having 3, 4, or 5 columns exist for the different "classes", each Member can serve, the table has a field by "category" and in each case where a member has more than one destination of 'category', there is no record in doubles, with only the 'box' is different.

  On top of this anomaly, some members have many places - so can repeat the names, but the phone numbers or address may be different. I need treat those as individual lists.

  Normally, we have a record for each Member, and the fields of multiple within this folder categories - as any sane person would. What I can't understand is the correct sql or cf coding to combine the multiple (even assumed) members in a single record while taking the unique/different categories (from dupes) and everything just by adding them to the data base member output.

  Example AS IS;

  1, Bobs lamps, lamp sale

  2 Bobs lamps, lamp repair

  3, Bobs lamps, coconut Bikinis

  Output desired;

  1, lamps of Bobs, sale of lamp, lamp repair, coconut Bikinis

  If I can output a CSV list to the desired format I can re - import generating new columns. However not all announcements will be several occurrences of category, so I'll need null placeholders for possible columns of 4 category.

  I really hope it's more simple that I see right now, and one of you superstars can help a guy!

  Thanks in advance!

  First of all.  I think you have not necesarilly have an anomaly!  It will depend on if it comes to all the data, or just the way the data was extracted.

  What you have here is normalized to a lot of relationship where a foreign key is duplicated with unique data for each record category value.

  I really hope that you are NOT intended to turn that into this horriable table design.

  Name	Categor1	Category2	Category3
  Bobs lamps	sale of lamp	lamp repair	Coconut bikinis

  But as for how to display without the expandable names... Depends a bit on what type of variable, the data are in.  If it's a record set from a query, it is trivial with nested loops .

  
  #myData.name#
  
  #myData.category#
  
  
  

  If it is not in a recordset object variable then the closure would be more complex, but the idea is basically the same.

• I messed up compress and decompress files Win XP. Can I get help?

  I don't know that I've caused this mess somehow by deleting or disabling something somewhere. Can someone clue me?

  My computer has lost the association. ZIP files and he wants to use a program WinZip he wants to sell me.

  I googled the hell out to try to solve this problem and stuff talking about click with the right button on any file and choose something to compress. But is not there at all. If I try to open this file, a box pops up wanting me to use a trial version of WinZip or purchase.

  After fighting this mess a day for a week, I'm almost ready to throw in the towel and a pc to Apple. But I'm not a silencer!

  So can someone please copy / paste in, or simply write me a quick lesson on the implementation of this compressed file (zipped) and then zip a file inside to allow the smaller space of storage or for emailing?

  I'm no reader don't link, so please don't not all component software snap-in all the links to me like this http://support.microsoft.com/kb/306531. For some reason, my head just started twisting and even after trying to make sense out of what he tells me to do, I'm still lost.

  Help!

  I was able to open a zip file that I found online somehow, somehow after that double click I wanted to just open it with WinZip. Somehow, I recorded it on my desk and then I think clicked and selected open with and he offered me something (compressed) standard Windows. But I don't seem to get that now.

  I would of course go to my Docs and a kind of zip file and then send it to myself and then unzip the attachment. But I can not yet understand how to do the 1st step. I'm feeling braindead, but actually I was quite able technically my life. HOW frustrating1

  CAN I HAVE IT PLEASE HELP!

  Yes, WinZip is a commercial product, but you can use 7-zip, which is both free and much better than the built-in Windows file archiver.

  To restore the native Windows XP file compression utility, see--> http://windowsxp.mvps.org/zipfldr.htm

  These directions are pretty clear, but if you have problems, after return and tell what is confusing you.  If it still does not, after the full text of any error message you get, without paraphrasing.

• How can I delete the file Win 7 after that my PC is to go back to XP?

  I went back to XP on my HP Pavilion s7410n PC after that Windows 7 upgrade did not work. My PC works well with XP again, but how do I get rid of the Win 7 file that takes up space? How to remove files and protected files? I tried to remove it, but I tells me access denied.

  Thank you
  Gwen

  Hello

  Try to delete the files and folders using check and disk cleanup if it helps. Disk clean up will help you remove unwanted and unused files, folders, and programs.

  Description of the tool in Windows XP Disk Cleanup:

  http://support.Microsoft.com/kb/310312

  Hope the information is useful.

• is it safe to delet DAT files. win xp

  as the DAT files could be almost anything is safe them in win xp

  as the DAT files could be almost anything is safe them in win xp

  The short answer is no as shown above, how would you know whether or not a program on your computer needs the file. Read HERE.

• Cannot delete file win xp sp3

  I have two files that I can't remove.  The name is avidemux_2.5_r7200_win32.exe I d/l from cnet.com somehow, they changed their date on themselves at the 06:43 04/30/1986 on all attempts, the error message is the same: it is used by another person or program.  I realize that there is a perion in the middle of the file name.

  I can't change the name.

  I tried to remove it by using the right click, delete file and tasks folder, cmd prompt del filename and cmd prompt deltree filename.

  I tried to change the attributes with the only success beint removing hidden.

  I am able to copy the files to another directory, but the copy is undeletable also (so now I have 4 copies).

  I'm unable to move the file to another directory.

  I used regedit and delete any key with this file name (the company is the nth file).

  I restarted in safe mode and cannot be removed using the foregoing.

  There's a copy on my backup NAT and I can not remove this file from here either.  Understand an output, please.

  Well, I thought I knew about the removal of things but...  I really need some help here.

  PLEASE

  This looks like a nasty piece of malware.  No legitimate program protects himself as well...

  My next step would be to start from an operating system on a CD.  I love the free Hirens Boot CD
  Hirens: <> http://www.hirensbootcd.org/download/ >

  Download the file .zip, extract it to the hard drive, and double-click the file ".cmd" generate/create a bootable CD.  Boot your system from the CD and select the option 'Mini Windows XP'.
  Booting from CD does several things for you.  First, it ensures that none of the files on the hard disk are "used" and in the second place, malicious programs on the disk hard which can actively prevent the deletion of one such file will not present when booting from a CD.

  AprΦs the dΘmarrage, you might want to make sure that there are no attributes system or hidden on the file that you want to delete and you will find a multitude of utilities on this CD that should be able to get rid of this file for you.  In my view, there are also utilities anti-malware on this CD that you can choose to run while you're started towards him.  Let me know if it helps

  HTH,
  JW

• Allowing the sounds of navigation in Explorer file Win 8

  How to activate navigation sounds in the file Explorer Win 8?

  Hi Sergei,

  Refer to the following steps and check if you get sound when you browse in Windows Explorer.

  a. press the Windows key + W and type system sounds. The search results, click change system sounds option.

  b. then, sound configuration window will be pop up and on the sounds tab, find the File Explorer > Start Navigation event inside the list of events of the program. Finally, you will see that there not its attached to it. Just find the Start.wav of Navigation of Windows in the drop-down list sounds, click on apply, then OK.

  I hope that helps!