Thunderbolt ExpressCard adapter for ExpressCard-8360 card

Similar Questions

• No laptop power when the ExpressCard-8360 card is connected

  I can't turn on my laptop when the expresscard is connected. I use PXI - 8360 ExpressCard with my Dell Vostro 1000 (BIOS 2.6.2

  Windows XP Professional Version 2002 SP 2) connected to the NI PXI-1033-NI PXI-6220 chassis in slot 2. I installed the driver NOR-DAQmx 8.7.1. and NI PXI Platform Services Version 2.4.1 assistance. Thank you.

  Hi baf.

  1. Please check to see if there are updates available for your laptop BIOS.

  2 PXI Platform services 2.5.1 is available.  Please install that.

  3. Please try to turn on the laptop with the card inside, but not having is not the chassis.  It will start?

  Kind regards

  Sammy Z.

• Card ExpressCard-8360 vs PXI-8331

  Hello

  I can control a PXI-1042 q system (it has map PXI - 8331 MXI-4) via a laptop with ExpressCard-8360 card?

  Thank you.

  The response of OR not.

• NO ExpressCard-8360 problem installing on DELL latitude D830

  Hello

  When you install an NI ExpressCard-8360 with our PXI chassis, I have problems and cannot operate.

  I followed the procedures closely, but when Windows starts, it wasn't able to install the two bridge PCI to PCI Standard PCI.  I managed to start and installed manually.  The second PCI bridge, Windows shows error Code 12 not enough for resource assigned to the device.  I tried to make it inactive a few resources in the BIOS, it did not help.  I tried to disable a driver using resources, it has not helped. I updated the BIOS of the A13 A14 version, it did not help.  I'm out of ideas.  Help!

  Please note that this laptop works very well with NI PC Card 8310 bridge with the same PXI chassis.  We have acquired the NI ExpressCard-8360 to expedite the transfer of the large data set between the chassis PXI Board A/D and the laptop.

  WOW!

  I found the solution.  I found that this knowledge base MXI-Express Setup/compatibility issues and Solutions (http://digital.ni.com/public.nsf/allkb/81CBF2F7F0BAEDBD86257330000514DF?OpenDocument) who suggested delete OR CardBus/8310 driver for solve problem Code 12.  After trying everything else, Hey! Why not try.  And it works perfectly now.

  WOW! This driver NI CardBus/8310 is a bad boy.  Please note that I didn't card Cardbus plug, the driver always keeps the PCI ExpressCard to work well.  Weird!

  Hope this discussion helps someone else.

  Eric R.

• Is there an Ethernet adapter for the MacBook Pro (retina, 15 inches, mi 2014)?

  I need to connect my MacBook Pro (retina, 15 inches, mi 2014) to an ethernet cable.  Unfortunately this computer lacks an ethernet port.  Is there an adapter of all kinds? Thank you.

  Yes, you must buy a Thunderbolt for the Ethernet card. Local Apple Store, Best Buy, Staples, Amazon and other wear.

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Model wireless adapter for HP Pavilion 15

  Hello

  I need to buy a wireless adapter for my HP Pavilion Notebook of 15 and I would like to know the company, the model and configuration of the same.

  HP has an online store in the United Kingdom where I can purchase this item?

  Details of the laptop:

  Model: HP Pavilion 15

  Processor: AMD 5750 APU A10

  RAM: 8 GB

  Graphics card: AMD Radeon HD 8650 + 8600 M

  HARD DRIVE: 1 TB

  Motherboard: 1983 01.15

  System BIOS: F.33

  OS: Windows 8.1

  Thank you

  Hi @Metal_Head,.

  Shows that you are connected to a network that is not identified with limited capabilities.

  To troubleshoot the wireless, you will need to remove the Ethernet cable.

  If you right click on the Network Center and sharing, disconnect the connection you and connect to your router.

  Thank you.

• Photosmart C4140: Using the adapter for SDHC and SDXC CF in Photosmart C4140

  I have a Photosmart C4140 printer and my cameras using SDHC and SDXC memory cards. I read the specs and some info online and it was stated that this printer does not support these cards. I bought a CF Ultimate Digigear adapter that accepts SDHC and SDCX cards for use in a CF Type 2 slot as the slot on the C4140.  I tried one of my SDXC cards and I get an error "memory card" on the LCD of the printer. Then, I tried the SDHC card in this card and it worked. I was able to view the photos on the LCD of the printer. However, when I tried this SDHC card by removing the adapter and re - insert into the CF slot, I started having the 'memory card error '.  I couldn't read this SDHC card in the new CF adapter. What could happen that he would only read the card only once? I checked this SDHC card in my camera and it still works and can store images. Does anyone know of any other CF adapters that can work?

  Info on this CF adapter can be found here:

  http://www.shopdigi.com/product.aspx?pf_id=SDXCF

  I would like any advice or ideas.

  After some trial and error, I discovered that the CF adapter has one slight movement from side to side, as he goes into the card slot see By putting my thumbs on the corners of the card and pushing the adapter in a fluid, non-stop movement, I was able to get the printer to recognize the adapter and the memory card. It takes a little practice.  This CF adapter works fine. Now I can use the cards SDHC and SDXC times with my printer. I need to buy a new printer.

• which adapter for MBP 2009 (MD565LL/A)

  I just got back my 2009 mbp which I use primarily as a backup machine or to run a CD rom, now that I have a more recent tune.

  Unfortunately the person that I lent lost the power cord. It seems that I need an adapter model T in FORM 60 W magsafe power MD565LL/A. comments on this adapter on the apple forum are not so great and I remember that my original power cord was a cord in FORM of L and that he was traded for a T shaped card (which is the one that has been lost).

  because this laptop is not worth a ton of money I am unwilling to spend a lot of money on a rope (and I have two cords for my 2015 11 "air (45W magsafe model 2 model power A1436 adapter).

  • in any case, should I drop $ 79 on the apple version?

  should • I get the adapter T-shaped?

  • are there some sort of ADAPTER I could get for two cords, I have currently (mine do not match of course the laptop of 2009).

  • buy one of these used?

  Thanks for any help on this.

  Adapters of origin MagSafe (depending on model/year delivered with) could be

  L or T shape. some can be interchanged. The official notice was

  Try & get identical spare. -Note: Most recent MagSafe2 have a similar appearance

  Although not interchangeable in both directions... it can be confusing in details.

  MagSafe 60w and 85w adaptors could be used on your computer. If it is sent

  with the 60w, it would be OK to use an 85w, if he is also compatible.

  Said magsafe2, your # reference

  http://eShop.MacSales.com/search/MD565LL/A

  Macsales, owc Other Magsafe 60W for all MacBook, MacBook Pro 13 item (s)

  Sometimes, OWC macsales.com offers a selection of various Apple MagSafe

  power adapters & some batteries. The low power 45W MagSafe adapter for

  the MacBook Air should not serve on more demand another model MacBook.

  Your MacBook Pro is a former model, be sure to note that the model could use

  either the magnetic end type. I have an early MacBook which serves to confuse

  because a generic clone of dubious provenance, was given to me, with her.

  And quality is the only real issue for me. The generic has no Apple logo and

  a no doubt parts of quality below inside that can fail or hot, and so on.

  • Find the right adapter cord for your laptop Mac - Apple Support and sector

  • Laptops Apple: Troubleshooting MagSafe adapters - Apple Support

• firewire iEEE1394 for pavilion p62125 card

  Hello, I'm looking for a pci card that will work with my Pavilion p62125.  I have a camcorder Panasonic that I try to get the video off of and my pc does not have dv or ports d-link.  I have a hub, but it does not work.  I need a port for a firewire iEEE1394.  Thanks for any help you can offer.

  What you need is an Express of PCE x 1 1394 firewire adapt card to install in one of the PCI Express x 1 slots you desktop PC.

  Here are examples at NewEgg.com

• Compatible adapter for Y430

  Hello

  I was looking for a compatible adapter for my Y430.

  The adapter specification is: 19V 4 74A, 90W (model PA-1900-52LC).

  On the market, all compatible cards are 20V, 90W.

  My question is, is compatible with a 19V adapter 20V (if both are 90W) adapter?

  I want to make sure, before the Player in a bad adapter and burn my system.

  Help, please!

  Thank you and best regards,

  Ritesh

  Hi Ritesh,

  20 volts DC seems to be perfectly acceptable for a requirement of 19 V DC,

  a power higher than stated is even best for example, 120 w.

  Please make sure that the replacement DC adapter plug has the right size and polarity!

  http://shopap.Lenovo.com/SEUILibrary/controller/e/Inweb/LenovoPortal/en_IN/catalog.workflow:Show - cat...

  Zehn

• Windows does not detect a driver for my network card

  Hello. I am trying to understand what driver should I install for a network card on a HP 2000-219DX laptop. I saw the list of the drivers for it and got the file of the driver Ralink 802.11 b/g/n WiFi Adapter from another PC. I don't know how to install this or if I have to use another driver altogether. What should I do?

  Hello:

  You need this graphics driver for your configuration.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101979-1&cc=us&DLC=en&LC=en&OS=4063&product=5118697&sw_lang=

  If you see a device called SMBus Controller in your device manager, you must install the drivers for the AMD Chipset.

  Download and install the first file in the list at the link below.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• FireWire PCI (used strictly for external sound card): should I deactivate Windows...

  I have a PCI of SIIG Firewire 1394 (Port 3) adapter installed in my system. I use "strictly" for my card external sound Presonus Firebox. The computer in question; the main function is a Studio of Production Audio. I had chronic problems with MIDI and other issues.

  My questions are:

  (1) in the Network Connections/1394 Connection/Properties/General tab:
  I have to uncheck the Client for Microsoft Networks, file sharing and printers for Microsoft Networks and
  Internet Protocol (TCP/IP) dialog boxes?

  (2) in the Windows Firewall/Advance tab:
  Should I uncheck the 1394 dialog box?

  My goal:

  I hope for a maximum operational efficiency for my sound card for the application it is used for.

  I do not think that network settings 1394 you ask on have something to do with its connected to the 1394 PCI adapter card.

  To find out for sure, change the settings and see if it helps.  You can always change their return.

• New 5 Ghz PCI wireless adapter for dv9438ca?

  My new 5 GHz router creates a mismatch... can I buy a new 5 GHz Mini PCI wireless adapter for the following PC...?

  HP Pavilion dv 9000 CTO Entertainment notebook computer PC

  Model # dv9438ca

  Prod. # GL887UA #ABL

  [Personal information]

  It was delivered with... Part # 441090-001... Wireless 802. 11 b / g mini PCI card (Broadcom, Hoya) adapter - data rate of 54 Mbps, 2.4 GHz of bandwidth of operation...

  I want to install any compatible which will allow me to access 802. 11A or 802.11n at 5 GHz

  Please & Thanx

  Beauvaidos

  [Personal information]

  Maintenance and Service of Guide available on this link, I don't see a N Wireless internal that is compatible with the BIOS on this laptop... You will need to get a USB external, if you need to connect to Wireless N

• Adapter for battery suddenly is not recognized

  Any input would be amazing!  I have an original battery and the original adapter for my computer.  Suddenly, my pc will not recognize the ac load.

  I have a Dell Inspiron that is about 2 years old.  I'm not very 'cranky' and anyone can or will help.  Please post a very descriptive answer.  Thanks to all who help!  I am at school and this is my life line.  I don't even know if my computer is connected to this card if it will provide me with electricity I need without the battery "characteristic".

  If you have a problem with the plug that connects to the adapter for the laptop, hire a technician to replace the Jack. There are dangers such as electrostatic and ruin your cell involved in the repair or replacement, I wouldn't advise you to try something like that. If you do not want to do it yourself, you can buy the tools and the spare part. The time that you would be out looking for this only repair would be worth more that a technician would charge you.  Good luck!