Adapter for battery suddenly is not recognized

Similar Questions

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• HP Officejet Pro 8600 has all of a sudden is not recognized by only my computer at home

  Hi, I have 4 laptops in my house. We have all been connected wireless to my HP printer for over a year. All of a sudden, for some reason, my computer no longer sees the printer. I have an ASUS. I run Windows 7 with the Windows Firewall. My router is a Linksys EA3500 age of 3 months. I can print from each another printer at home, and I can also print from my Android phone. However, when I try to print from my laptop, he says now that it detects a printer has been turned off.  I did everything that I can think of to fix this. The only changes that I had recently installed program AV of Webroot. I can't be 100% certain, but I'm sure that I printed from this facility, and all the other computers on my network use Webroot as well without any problems. Hoping for help. Here's what I've done so far:

  1. Tried troubleshooting printer via the computer. He went through control of the coil and all service that the standard troubleshooting only. It says something about my printer is off. It certainly wasn't, but I unplugged and rebooted just to be sure. No solution.
  2. Noticed the IP has changed on the printer and thought that maybe something with dynamic vs static (don't know much about it) so went to 'update IP address' on my laptop and updated info. Checked the info of the router settings by entering the IP address of the printer in the browser. Printer shows connected and ready and everything seems good. I ping the ip with the results. Mac filtering is not enabled, so I don't need to deal with this. SSID is not hidden. 802.11 configuration indicates that the network type is WPA - PSK WPA2 with AES selected for encryption. As always, it has been.
  3. Double checked to make sure printer was recognizable by my firewall. It is on the accepted list.
  4. Last resort: I uninstalled the printer software and removed the device from my laptop. Attempt to reinstall, but when it gets to the part where it is supposed to search for the printer, it says cannot find. I enter the IP address of the printer and it does not always find. I enter the host name, and it does not always find. As I uninstalled it, I can no longer install the printer at all.
  5. Then to airline pilots and I tried using the installation via the online option. same results. "Cannot find the printer.
  6. I unpugged the printer from the wall, again, this time for more than an hour, hoping that it would reset, but visiting this probabaly account is not the problem since any other laptop can print in my house.
  7. Tried to plug in the ethernet cable and the printer this way. Plugged one end router and another printer according to the instructions of troubleshooting tips. Software disc and it does not install the printer. Change IP address on the printer when I use ethernet and I entered new ip accordingly.
  8. Reset my modem and rebooted. Resetting my router and then used software to reconfigure. do you have the standard "wait ten seconds and a plug in back and restart the computer". No solution.
  9. Check my network wireless adapter setting to make sure that I have more updated drivers. Yes.
  10. Delete everything that relates to my printer in each folder and in regedit.
  11. Tried to reinstall printer wireless both with ethernet. Unable to find the printer so be it.

  I haven't changed any settings I can think of since the last printer worked a few weeks ago. As I said, all other computers print perfectly. The only thing I can think of that is different is all oher laptops running Windows 8 and I am always on 7, but it's not serious before, and I can print from the HP printer on my phone software.

  Please someone tell me what I'm missing here. I'm going bonkers. Thank you very much to everyone who takes the time to answer on this support forum.

  Thank you very much for your detailed answer.

  I put a static IP address on my printer to 192.168.1.3. After several attempts to install the printer I just couldn't. I decided to run combofix and after that and a reboot I was able to install the printer successfully. Everything went as it should work. IP address is. I thought I was finally going to solve this problem. Then, I hit print a document and it doesn't have same queue in the printer.  I remembered that I read on how you need to go to the printer properties and make sure that the printer is on the TCIP port with the IP address. That was the problem. He had the bad IP. I changed the IP of what I changed to manually and voila. I print again.

  I think everything that happened during the changed dynamic configuration ip 192.168.1.110. I don't understand why all Win8 computers in my house didn't get affected, but I'm just glad that affecting an address static IP did the trick. It has been weeks since I've heard this thud hit sound of my printer from my computer.

  Thanks again for your help.

• Shortcut to shared folder used for years, suddenly will not work.

  So far, I was able to send files to the shared folder on the desktop or laptop computer and access them from computers. (Both running Windows 7). The only "change" to the system recently is the August security updates. Now I can send to the shared folder on the desktop but cannot access it from the laptop. I hope some good Samaritan can help me fix this frustrating problem. Here is what I get when I try to open the link on your mobile:

  Problem with shortcut
  The drive or network connection that refers to the "Shared Folder - Shortcut.lnk" shortcut is not available. Make sure that the disk is properly inserted or the network resource is available and then try again.

  \\Desktop is not available. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  Logon failure: the user has not granted the type of logon required on this computer.

  This is the path in the shortcut of the laptop:

  \\Desktop\Users\Jim File Dale\Desktop\Shared

  Hello

  ·        Are you able to communicate between computers in the homegroup?

  You can try to temporarily disable the antivirus and check if the same phenomenon occurs with shared folders.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If disabling antivirus works you will need to give exceptions.

  See the link below.

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  Create a new folder on the computer and check. You can use advanced sharing option to check if it helps to solve this problem:

  1. go to the folder you want to share

  2 right click on the folder, and then select Properties.

  3. go to the tab shares and click on the button "Advanced sharing...". ».

  4. check the option "Share this folder", and then select permissions.

  5. by default, there will be the "everyone" group

  6. If you would like everyone to change your files then click full control for everyone.

  7. click on OK.

  8. Finally, click OK, and then try opening and editing of files from another computer.

  Hope this information is useful.

• getDefinitionByName for embedded swf symbol not recognized as image.source loop

  Hello

  I do this in Flex, but the code is pure actionscript, so if this isn't the right forum please let me know :)

  I have incorporated symbols swf like this:

  [Embed(source="mySwf.swf", symbol="Symbol0")]
  [Bindable]
  private var myVar0:Class;
  [Embed(source="mySwf.swf", symbol="Symbol1")]
  [Bindable]
  private var myVar1:Class;
  [Embed(source="mySwf.swf", symbol="Symbol2")]
  [Bindable]
  
  private var myVar2:Class;
  

  I want to myVar0, 1 and 2, the source for the image of the objects in a loop. Like this:

  for (i=0;i<2;i++) {                
  var img:Image = new Image;
  var name:String = "myVar" + i;
  var imgSource:Object = getDefinitionByName(name);
  img.source = imgSource;
  }
  

  .. .but this code throws an exception that "myVar0 is not defined. However this code:

  var img:Image = new Image;
  img.source = myVar0;
  

  .. .works great.

  Try this instead of 'myVar' + i

  This ["myVar" + i]

• An 8GB SD HC card that I bought for my camera is not recognized by Win XP SP3.

  I downloaded an update of Windows, informed me that it wouldn't load because I already had the necessary software through my SP3 update.  The new 8 GB card is recognized on a Windows 7 computer.   My XP computer recognizes 2 GB and smaller SD cards.

  Thank you.

  You need a player who is able to read SDHC cards: http://www.google.com/#hl=en&xhr=t&q=sdhc+card+reader

• Satellite L10 - battery not recognized by Vista MS

  Hello

  I use MS Vista on my Satellite L10 and everything works great except my battery which is not recognized by Vista. There is just an unknown device in my equipment manager. In the section on the homepage Toshiba drivers I couldn't find a driver or other instructions. The MS Hotline told me this isn't their but question Toshibas.

  I hope that this forum is someone who can help me solve the problem. I just want to know if my battery has enough power for 20 minutes or 2 hours and I really hate it if my laptop is suddenly out of power.

  Thanks in advance.
  Christoph

  Hello

  You have installed Vista on the L10?
  Wow I know Satellite L10 is not Vista capable and you should be happy that this OS works without big worries on this Satellite phone.

  However, I recommend the Vista update to the last State, to install the compatible chipset from Intel page.

  But I assume that the BIOS on this laptop is not fully Vista capable that this question therefore appears on the L10.

• Laptop HP Pavilion dv6 - 3016 s: USB (device not recognized) problems

  Hello

  on my laptop (Pavilion dv6-3016sl, bought in 2010) for a few months the USB connections give many problems with different devices.

  The first issue with the key external communication 3G (ONDA TM201) Internet: the USB key (which has worked for many months) is not recognized. I tried to reinstall the software and drivers (get the latest version from the website of the producer), but it is always unclear correctly.

  The visible in USB Device Manager error message is "cannot start (code 10) machine.

  Recently other USB devices have ceased to be recognized: powered USB Hub (HAMA USB 2.0 Hub 1:4, bus) and the Wired Optical mouse (Logitech).

  It is also not possible to install new USB devices (for example, a device of wireless sync to a cuff of training).

  I've done many controls of Microsoft on the integrity of the system, and I frequently run the Windows Update to be aligned to the latest version of the fix.

  You have any suggestions to analyze/fix this locking problem?

  Thanks in advance,

  Moreno

  I know this may seem a rather harsh to suggest method, but at this point, I suggest backup of important things on your laptop computer to online storage. This is because you can use the USB storage for the moment.

  Once you have done this, it's time to locate your drives support usb recovery and licenses of all other programs that you have installed or recovery.

  Start on the recovery media.

  Use the HP Recovery Manager to perform a factory image recovery which will reinstall the operating system.

  Since you say that the usb ports work under Linux, then reinstalling the operating system Windows needs to solve the problem of usb port that you are experiencing.

• Microsoft 2000 not recognized wireless mouse - code 43

  wireless mouse worked for 4 days - so not recognized and recommended to change the device - problem with the code 43 - it is brand new - 2000 microsoft wireless mouse.

  It's the same thing with my previous microsoft mouse.

  I am so frustrated with this - strangely, I bought a wired mouse to my local supermarket (Asda) for £6 and it works perfectly.

  Hello

  Run the troubleshooter from the link below and check if it will help: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  You can also try the steps listed in the link below: troubleshooting failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

• Replacement battery for Equium A300D - 13 X not recognized

  The original battery was shot while I bought a real Original Toshiba PA3534U-1BRS battery.
  To put it in the laptop, it seems load but still in the corner says "battery not recognized."
  When I take the charger, it says 'unknown '.

  I tried to update my BIOS to see if it would help, do not know if I did it correctly but anyway, he seems to have no effect.

  Any suggestions to fix this or should I send it back?

  Maïwenn.

  E-mail: [[email protected]]

  Hello

  What exactly happens if you unplug the AC adapter?
  The laptop shut down automatically?

  I don't know if the battery calibration may help but it s worth a try.
  The battery must be charged completely and then you must discharge the battery until the cell stops automatically. This should be repeated several times

  If this is not enough, I would recommend another test battery which can be purchased from Toshiba ASP in your country. Guys might provide a compatible part.

• My battery on my compaq presario cq56 is not recognized. It's not even an icon for it. Hp support assistant said trying the update of the bios battery. I can't find to download... Help, please!

  My battery on my compaq presario cq56 is not recognized. When I ran the test on HP support assistant, he says take the battery off and then powered off and that did not help. He said to ensure that the latest version of the BIOS battery has been installed but I can not find how or where to do... someone know how and if it is the best thing to do?

  Hello

  This document includes the steps of research, download and installation of updates to the BIOS (Basic Input Output System) or ROM (ROMPaq) for your HP or Compaq laptop.

  Update for AMD processors

• Satellite U400-119 - battery not recognized

  Hello

  I just bought a laptop TOSHIBA Satellite U400-119. The operating system is Windows Vista Home basic.
  Before I turned on the laptop, I plugged on the CC adapter and let the batteries reload for 24 hours.

  However, after 24 hours, battery LED icon is orange and blinks (which means that the battery is low according to the user manual).
  When I tried to turn on the laptop without the adapter DC laptop computer did not respond. So I installed Vista while the laptop was still connected to the DC adapter.

  After installation, the Vista battery icon displays a red cross on the battery icon, which means that it is not recognized.
  This is a brand new laptop so I think the battery needs to be replaced, but I don't know.

  Someone at - it had a similar problem?
  Any sollutions to my problem?

  Thanks in advance!

  A display really interesting because one of my friends got the laptop U400 and a similar one issued what s happened too.
  Suddenly, the battery did not recognize I thought that it s a malfunction of the battery. But I was wrong.

  The solution is very easy.
  You must update the BIOS and this should help get rid you of this strange issue.
  My friend did the same thing and it worked!

  So check it out. Download the BIOS compatible and right and update!

  Good bye

• Ports USB suddenly not recognized

  I have a laptop with windows Vista on it and it came with 3 USB ports.  After doing some cleanup, defrag and that you back up all of a sudden none of them are recognized.  They appear in the Device Manager but not in the "computer" section  The wireless mouse does not work and our Ipod is not recognized, although it will load.  We did all kinds of update.  Have not uninstalled and reinstalled material... bit nervous about it and don't really know how to do it.  Good instructions on how to do it would be useful if that's what we need to do.  What should we do?

  Any help is appreciated.

  Hello

  Try a system restore to where the USB ports worked.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ===================================

  If necessary:

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  For a laptop, using a real computer shop (no leeks and glances at a Best Buy or any other
  Department stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Password not recognized for the new Gmail account

  My gmail account ID / password is not recognized by Thunderbird. It worked, but somehow it has suddenly stopped working (not able to receive or send emails and just make an hourglass whenever I select any folder in the account).

  Some other details:

  . I use Thunderbird 38 (could the upgrade caused the problem?).
  . I tried to remove and re-add the account. It connects fine, but does not recognize the username/password.
  . I did some Google 2-step of checking is turned off.
  . I deleted the Google Contacts.
  . I checked that access for less secure applications is disabled in Google (even though I believe that Thunderbird 38 should not require this).

  I followed all the steps I find Google search, including the https://support.mozilla.org/en-US/kb/thunderbird-and-gmailsite. Nothing seems to help.

  I'm up a Creek. I like Thunderbird (use it for multiple e-mail accounts), but hair pulling try that it works - and it takes too long. Any suggestions?

  Thank you.

  account15:
  ENTRANTS: account15, (imap) imap.googlemail.com:993, SSL, OAuth2
  OUTBOUND: smtp.googlemail.com:587, SSL, passwordCleartext, true

  You will need to set OAuth2 authentication for the SMTP server as well.