Time between MCI and Test secure Channel

Similar Questions

• Let a burn of LED on a random time between 3 and 7 seconds

  Hi all

  Probably, it's a matter of simpel for many of you, but not for me. I try to make a counter reaction time. And I hope someone can help me with the first part: the led must Flash on a random time between 3 and 7 seconds.

  After this need to measure the time between burning directed and by pressing the stop button

  Results ranking in a table

  After the display of ten measures of response time average.

  I hope someone can help me to launch it, I need it for school.

  Thank you!

  Matthijs

  Netherlands

  Code Simon put tapped off.  The Down button was a nice touch, but cannot be disabled so we were testing times preaction and the param 'Trial' could get pretty messy especially on a series of rehearsal

• Exchange of parameters between MCI and IP IVR

  Hello

  How can I get or post parameters between MCI and IP IVR. These parameters can be used for advanced control of calls, but at the moment I don't have not managed to make these components between them 'talk' with variables.

  Thank you.

  Hello

  You can use for this purpouse the 'Business Get call Info' (data of the IDC to the IP IVR) and 'Business Set call-Info' nodes (IP IVR to CIM data) to SIR script Editor.

  Select from one of the nodes properties and on the 'Général' tab you can get/set the values of the MCI devices Variables (click on the 'Add' button and in the new window you can access these variables in the "Name" drop-down list).

  You can change the "expanded call Variables" in these nodes in the tab ' Variables to call expanded.

  Hope this helps,

  Juan Luis

• Error: No mapping between account and the security of ID names was done when trying to setup of Dragon NaturallySpeaking 10.

  Original title: no mapping between account and the security of ID names was done.

  I am trying to set up my Dragon NaturallySpeaking 10 program. My computer (Dell Studio 1550 on Win 7 64 bit) has been recently reset and during the reinstallation of the DNS and the subsequent fine adjustment, I came across a page that wanted my username and admin password.. I plugged in and it came up with the error message: "no mapping between account and the security of ID names has been done." There is one account on my computer and my admin. account. If something has been lost in resetting? How can I fix / security ID card? Thank you for your help.

  Hi Hasky620,

  I recommend you contact the support of Dragon NaturallySpeaking for assistance:

  http://www.nuance.com/support/index.htm

• How to set the time between workstations and Server 2008 R2

  Hello world

  I have problem with my Server 2008 R2

  all the workstations on my company doesn't synchronize the time on the domain controller

  I tried many ways to set up automatic synchronization via command prompt (Net time) and its does not work

  Please help me configure the time between the DC and the workstations

  Thank you

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• What the difference between Quicksend and Test send?

  Was just curious to know what are the specific differences between the 2: Quicksend and Test.

  Any ideas would be helpful - thanks!

  Hi Peggy,

  The main differences are that when you send a test send it adds test to the subject line and especially it does not get included as a real consignment. What this means is that if you are working on an email and send it to yourself or co-workers to consider, when you send the email as a lot of those who received it via a prior quicksend will be excluded he receives again. Using the send test option does not cause that happen.

• installation failed several times to KB2656353 and KB2656370 security update. I downloaded all the patches and recommended tools. What should I do?

  Received phone call from someone who identified himself as a member of the Technical Support of the Windows team.  Says my calculation had sent messages back saying that I had a virus.  Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus.  Noticed that Windows update was not the last 2 weeks so I tried to run the updates.  I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370.  I downloaded all the patches and recommended tools. What should I do?

  Have you tried the recommendations in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-install-update-kb2656353-i-am-receiving/f3c353ca-4d85-44e6-a5f0-eb9a5330d7c8

  and this article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-updates-continue-to-fail-with-codes-0x66a/5e05e18e-E2E5-400e-B114-75f155571b5c

• Analyzers of vector signals OR, in real time of tektronix and tests EMC spectrum analyzers

  Normal
  0

  21

  fake
  fake
  fake

  PT - BR
  X NONE
  X NONE

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  MSO-style-priority: 99;
  MSO-style - qformat:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 cm 0 cm 5.4pt 5.4pt;
  MSO-para-margin-top: 0 cm;
  MSO-para-margin-right: 0 cm;
  MSO-para-margin-bottom: 10.0pt;
  MSO-para-margin-left: 0 cm;
  line-height: 115%;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin;
  mso-fareast-language: EN-US ;}

  1. how to work if vector performance of or
  Analyzers of signals compare to Tektronix real-time spectrum analyzers?

  2 can you emulate Tektronix FFT
  processing overlapping?

  3. is it possible to use vector of NOR
  Analyzers of signals of compliance EMC and/or test preconformite? Is there some
  companies use it successfully? Need a special or custom software?

  Thank you

  Hi emc2006

  I'll answer your questions separated by your topics:

  1 - What is the factor that you want to compare between these two products? In the link below, you will find the performance of the NI PXI-5660 RF Signal Analyzer system.
  2. you can develop this feature of programming in software Application development, i.e. of LabVIEW.
  3. Yes, NI´s vector signal Analyzer could run preconformite or EMC compliance analyses. In the same link below, you will find in the subdivision of Applications.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4298

  Concerning

  Napoleao
  Application engineering
  National Instruments

• HP Probook 4530 s: how much time disk disinfectant and will secure erase?

  I have HP probook 4530 s ci5

  have a 750 GB hard drive (HDD) drive.

  Hard drive is Hitachi (HTS727575A9E364)

  I need my laptop to someone for a few days, so I need to make sure that my data is definitely missing.

  I can use the disk Sanitizer or present secure erase option in the BIOS. But I don't know how long it will take?

  Can someone please tell me which disk-disinfectant time and secure erase option will take to a passage?

  Hi all

  I just went ahead and did it. So for other people like me looking for the answer to this question, I will share my experience.

  When I clicked on the option of disk Sanitizer, he gave me several choices like, 1 pass, optimum, gutmen and custom. I chose optimum, it is has had warned only that data will be permanently erased, there was no estimate of the time, I had to do, I did. After 22-23 hours of waiting, he did. And the optimum had 6 cycles of option. He showed the result below.

  

• Conflict between McAfee and Microsoft Security Essentials?

  I installed Microsoft Security Essentials on a system that had McAfee.  I thought I had the features on McAfee off the coast.  I started a full scan with MSE.  He locks up in Microsoft/Installer, which is where McAfee says that he kept finding three horses of Troy, ZeroAccess.ee, ZeroAccess.eh and generic.DX!12536d125737.  I finished the scan, but now at startup, Windows says that it has identified a problem and you need to restart in one minute.  I discovered that when I made off McAfee, it was only 15 minutes, therefore, it was still running when MSE was running her scans.  Now all McAfee services are turned off, but the problem persists.  I guess that both programs are in conflict.  The one minute message that the computer will be restarted lights Mode safe as well.  I did a restore (Vista) system and still have the problem. I guess I should remove one of the security programs but do not know what should be my plan of action.  Any help?

  Repost - See the post from Stephen Boots and run one of these "hot" spares and potentially eliminating your malware problems: http://answers.microsoft.com/en-us/protect/forum/protect_scanning/apparently-got-a-virus-wednesday-discovered-it/a1c1f188-8895-4391-90ac-f3d4c2d76418

  Alternatively, if Malwarebytes could not find try TDSS Killer or Hitman Pro. But one of these rescue disks might be the best...

  Make sure that you have a good processor and 4 GB of RAM preference if you install Win 7.  If you reformat / reinstall the OS which should also remove the malware.

  Good luck...

• test secure Channel 140 without classes

  can u take the vcp 140 test without taking classes and VIEW would give u an impression of your examination results?  Thank you

  You can do the test (and the results of the test) If you want, but you will not receive certification VCP unless you meet all the requirements (course + test).

  I assume you mean VCP - 410.

  André

• glitch between Firefox and Avast security 9 online

  I like to keep my private browsing window, but every time I have activate the online safety of Avast added on it by itself opens each time. below is a YouTube video showing what I mean...

  http://youtu.be/6p_mIPWxfF4

  I like Avast online protection, very good sound, but this glitch is annoying. I tried to uninstall both programs with no luck

  It seems that what is happening with Navigation Bar, not 'window'

  Try Avast support for help with their extension.
  
  http://www.avast.com/en-us/support

• Time between 2 summits

  Hey guys, Hello.
  I need to calculate the time between 2 summits and it does not work very well.

  Can you help me?!

  I'm using NI USB-9221, with 2 channels.

  I need to calculate the time between peak (12 volts) of channel 1 and channel 2.

  Here's my attached .vi.

  Thank you very much for the help.

  This is!

• The time between VISA W/R

  I use VISA in communication series with PIC18F4550 (mcu, USB copy series), I found if I read immdiately afte writing, I can't get the right data all the time. It seems that the time should be at the same time between write and read funciton, and delay must be greater than 0.35 sec.

  Fact delay is necessary or I used to misuse Scripture VISA and playback function?

  Also look at the use of the chariot of termination and the setting of time-out to your advantage.

  1 turn on the tank of termination (depends on YOUR DEVICE PIC18F4550, read the instructions)

  2 set the timeout to something MUCH longer than necessary. (like 1000 ms)

  Write then followed the reading. No delay, bytes read no. to the port

  For the bytes of lonely bytes expected reading feature request.

  The Read function will wait for the full message that ends with the chariot of termination and will return with your message as soon as he gets the chariot of the termination. Or will he wait until the timeout before giving up on your device.

  You can then decide what to do with if time-out error message never comes.

  I have devices that take more than 3 seconds to answer because they have to go do something before they can meet. Some of my exhalations runs to as high as 10 sec. I have set the timeout on the fly, based on the order that I send.

• How to find the time between two channels of entry in the data acquisition card or pci 6036

  Hello

  I read a lot-related posts on the simultaneous measurement of two input voltage of similar channels in map data acquisition. I know that the best material is "simultaneous measurments of the Series DAQ cards" but I only pci data acquisition card 6036 and I try to understand what is the time between the reading of the two channels . This period is always constant? (must it rely on a voltage (amplitude, frequency, waveform..). I send the sine wave (s) to the two channels and read the values of V, if they read the same value, the difference should always be zero but I get-0,002 to 0.002 Volt difference (I must find a way to convert it in time). A screenshot of my VI is attached. I wonder how I can accurately measure the time delay between the channel.

  I am open to any suggestion, my final goal to read exactly two channels at the same time ((ou connaître le délai exact donc je peux correspondre les données correspondantes étant donné le temps de retard))

  Hi spinup,

  better you should post your question in the forum of LabVIEW, LabWindows/CVI is used

  Good luck.