Time Capsule and new cable modem

Similar Questions

• Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Superior...

  After all, the chip is mainly a modem.

  Wireless is there but not designed as the primary connection.

  Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

  It is the Wireless N standard.

  The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

  The fact that aid.

  The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

• How can I configure my Airport Express to mesh with new cable modem bridge mode?

  Time Warner sent me a new cable modem and my Airport express still flashing orange light. How can I configure the Airport express in bridge mode?

  You can simply do using AirPort Utility on your iMac or iPhone, as follows:

  • Run the AirPort Utility.
  • Select the AirPort Express Terminal and then, select change.
  • For a Mac:
    • On the network tab, change the router Mode to: Off (bridge Mode)
    • Select to update and allow the base station restart.
  • For an iOS device:
    • Select Advanced > DHCP and NAT
    • Change the router Mode to: Off (bridge Mode)
    • Select done and allow the base station restart.

  

• setting up time capsule and express wired after disconnection of the airport

  I have a 2 TB Time Capsule and three 3 wired express airport throughout my house.  I know that when I added first the cable express, that I had to call apple to change some settings.  Now I can't service because they are more than a year and after a recent quick breakdown (two or three) power is the airport expresses link is more and a bunch of my settings seem to have changed on the Time Capsule.  Any help would be greatly appreciated.  Thank you

  If you think there are setting changes, then it would be better to start over.

  • First of all, you want to make a 'factory' reset on all of your base stations. This will return them to their "out-of-the-box" configuration Once finished, leave them turned off.
  • Then, we put up the Time Capsule (TC). Since it has been reset, it will broadcast a Wi - Fi unsecured network with a network name of something like: Apple network NNNNNN.
  • Use AirPort Utility on your iPhone, Mac or PC to configure the TC as a stand-alone wireless router. In other words, configure it to provide a secure WiFi network.
  • Once the TC has been configured, verify that the clients on your network can access the Internet with it.
  • If he succeeds, proceed to the next step. If this is not the case, stop and post back with your results.
  • We will now configure all of your base stations for a roaming network.
  • Power-up one of the three stations based AirPort Express.
  • Once again, you will need to use AirPort Utility to continue. The utility must now find the Express, and if all goes well, it will offer to the Express allows to extend the TC using Ethernet. It's what you want and just go through the steps automated window 'Installation '. And then on actually.
  • Do the same for the other two express base stations.

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• Time capsule and extreme; Cannot create the roaming network

  Problem: when you try to create a network roaming with time capsule and extreme, the wifi hangs and the network is up and down. Here are my deets:

  TC and extreme as well have the latest firmware of the 7.7.7 are the latest generation of products, purchased in the last 12 months

  TC is connected to Arris SB6183

  ISP is Cox North san diego County

  TC is then connected to the netgear GS105. (upstairs)

  NETGEAR GS105 then connects to GS108 (down in the patch panel in the closet of the master bedroom)

  1 x GS108 port connects to extreme

  I can get the stable network and works correctly as long as I don't have connected and extreme.

  I followed the instructions provided by apple in their "how to set up a roaming network.

  I have hard reset the devices apple repeatedly in my attempt to get things to work

  I started a Wan shortly ago at the connected WiFi and that was stable and work for not more than 30 minutes and then it went offline.

  So here I am now. Unable to get back online and stable with two apple devices connected network.

  System was stable and working well before the upgrade to 7.7.7. I had a wifi connected network not a roaming network at the time.

  Any suggestion would be great and really appreciated.

  Thank you

  After screenshots of the TC and AE installing airport utility.

  I suspect that you simply have something set wrong...

  Main error is to use extend wireless when it is connected by ethernet... This will create a loop and bring down the network.

  The two units must be defined to create a wireless network... both must use the same name (SSID) and the same password, but must be set to different channels.

  It is almost impossible in this case crashing the network since the two are completely independent Wireless Access Points... (WAP).

  The TC must be in router mode... EI must be in the bridge (bridge mode off on the network tab.)

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)

• I have a macbook pro and airport Time capsule and want to delate all data on Time capsule. How this is done

  I have a macbook pro and airport Time capsule and want to delate all data on Time capsule. How this is done

  Open Airport utility, select the Time Capsule and then use the option erase to erase its contents.

  How to check or erase a disc AirPort Time Capsule - Apple Support

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• Backup to Time Capsule and an external hard drive

  Hi all

  For several years, I use as a router Time Capsule and a backup device. Recently I found information about to associate an additional external hard drive for backup. For me it's a backup just to be sure when my Time Capsule would fail.

  I found information on the internet that it was easy to switch between the two devices. I connected the external hard drive in the time Capsule.

  But after installing the external hard drive my Time Capsule is not able to back up more!

  Please, could you help me find a solution. It would be great for me.

  Many thanks in advance,

  Diana

  I suggest that you get first back ups goes again on the Time Capsule, then we can discuss adding the USB key as a second backup source.

  For now, if please power off the power and unplug the USB of the time Capsule.

  (Gear on the dock icon)... open Mac system preferences, then open Time Machine

  Make sure that Time Machine is running

  Click Add or remove disks

  Under the backup drives, make sure that the Time Capsule disk (named 'Data', unless you have changed the name) appears

  If it isn't, then click data under available disks

  Then, click on disk use

  Close the window and now, click the 'clock' Time machine at the top of the screen

  Click on NTI Backup Now and who should get backups start on the Time Capsule

  After the return when you have confirmed that this is the case

• Cannot access Time Capsule and MacBook Pro on Windows task force immediately after upgrade to Vista professional professional 7

  I had a Windows workgroup for years, linking the PC and Mac, but also a Linkstation network through a Time Capsule router/Hard Drive Combo.  Immediately after the upgrade from professional Vista to 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but cannot access it.  I am able to access the Linkstation - system wonder a user name and password, and I have immediate access.  However, the system does not n = me a username and password when I try to access the two Apple products.

  Interestingly, I can access the Vaio MacBook, in providint the username and password for the Vaio.

  Please notify.  Thank you.

  IT FIXED!  Found the answer on the W7 Forum

  Access to Mac OS X Windows sharing Windows 7
  Windows 7 will not work with the Mac OS X Windows support for default share file. If you try to access a shared folder on Mac OS X, W7 will display a logon error repeatedly.
  The problem is that W7, by default, will only use NTLMv2 for authentication, which is not supported by the service of sharing of Windows of Mac OS x.
  The other problem is that safety minimum Session for NTVLM SSP based Clients.
  To work around this problem:
  1. in W7, open the control panel
  3. double-click on Administrative Tools
  4 double click on local security policy
  5 expand "Local policies" and select "Security Options".
  6. locate "network security: LAN Manager Authentication Level" in the list and double-click it.
  7. change the setting of "NTMLv2 only send responses" to"send LM and NTLM - use NTLMv2 session if negotiated"
  8. network Security: minimum session for the NTLM SSP (including secure RPC) Clients security
  9. change the setting of "128-bit" unchecked (No Minimum)
  10. click on OK

• Time Capsule and modem stop working after two hours

  Hello

  -A received the solid green light on Time Capsule.

  -All of the lights work on my modem Netgear CM500.

  -Ethernet cable firmly in place.

  -Power up, the two units of work perfectly and operate normally.

  -After about 2 hours, the internet connection is lost.  All lights are still entirely green on both units.

  -Disconnect the two units, wait 5 minutes, and then turning on again.  The use of the Internet is restored.

  -After about 2 hours, the internet connection is lost again.

  Cox on said guy here, everything went well at their end.  I think that something is wrong with my configuration of the airport because I put up on an iMac obsolete.  If this is the case, I would like to start everything from scratch, unless I don't have to (?)  My new iMac is here.

  Thanks in advance,

  -Chris

  It is a problem with the TC model AC. We do not know the cause, but he just has problems with a number of different cable modems. (others are also affected, but cable seems the problem of principle).

  What is happening is the WAN constantly talk to the modem port.

  There is nothing you can do... neither is defective... they are simply not happy punks when together.

  The solution is to replace one or the other...

  Around here people seem to think to replace the modem a better idea... the zoom model seems to be working... but check with Cox is in their list of supported modems.

  Zoom modem.

  https://discussions.Apple.com/thread/7360161

  https://discussions.Apple.com/thread/7427491

  IMHO, it is best to replace the router function of the TC... Thus, a good router market as (v2) TP-Link WR1043ND<$50 on="" amazon)="" and="" flash="" to="" gargoyle="" firmware.="" this="" includes="" loads="" of="" great="" functionality.="" the="" tc="" then="" bridged="" to="" this="" unit="" for="" wireless="" and="">

  Or the other method will help you to a better place.

• SB6141 and Time Capsule works best not Modem?

  I bought an ARRIS / Motorola SB6141 modem yesterday, unfortunately without checking here first of all support and as much I having trouble to get a SB6141 and Time Capsule to cooperate.  The modem works fine with a hard line, but when I plugged in my Time Capsule for the modem I got the dreaded flashing yellow on the TC light. Three hours of reading posts here (and elsewhere) and troubleshooting later and I am still at a loss. Rather than the fight over trying to get the SB6141 to work, I would rather just buy a modem that works (at least mostly) with the TC. I am in the area of Chicago on Comcast. List of approved here modems. Please let me know if you have found a good modem to use with time Capsule. Thanks for any help!

  Additional details - I bought time Capsule 2 TB in March this year and it's all so far (ongoing enforcement, I think, 7.7.3)

  Not on Comcast, but the use of two modems in rotation.

  Zoom 5341J and Netgear CMD31T, who all have both been impeccable since they went into service almost 2 years ago.

• Problems with new cable modem and router

  Long story short, that my cable modem went bad.  I replaced it.  Now the two computers cannot connect to the internet.  It gives me a DNS error, saying that they can not find the server.  However, I can get on the internet if I hang the right modem to computer with courses through the router. I got it with the new modem a few days of work and use of the router, but now it does not work.

  There are 2 computers on the network, the two runnning vista.
  a linksys router model number BEFW11S4 ver 4.
  and the motorola surfboard SB5101 modem.  the old modem was a surfboard SB5100 motorcycle.

  There's a btn reset on the router (often the metal clip through a pin hole)
  Everything also its possible allways the router is bad

• Airport Express, Time Capsule and Airport Express using the same network

  Just moved into a new House and this is what I install.  I have 7 Port wired into the House.

  Closet of network in the Garage:

  • Cable modem
  • Airport Express
  • netgear switch 8 ports
  • It works pretty well.  All my wired connections work fine.  Wireless is quite good but cove not enough of space in my house.

  Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections.  Who works AND let me wish the WIFI?

  Thank you!

  Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

  Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.