Time Capsule keeps losing express Extender

I have a 4th Gen Time Capsule and 2 2nd Gen airport expresses configured as Extender. Both were broadcast excellent for most. Recently I discovered that there is something dead in my childhood bedroom. So I decided to add a 3rd express to fill the void. The installation program connected very well, without a hitch, but after awhile, I noticed that the 3rd express was not taking all the wireless devices. He would show as connected but no information has been giving any information on the signal as it should. I restarted the entire network and she came back to the top but after a little while the same problem. Thinking it's a bum on purpose, I tried to reboot once more but this time the problem moved to another express, this time the master bedroom. I know that he did not take due to the wireless devices all devices were connecting to the Capsule itself. However there is a blu - ray player with no wifi plugged into the express and it connected right and was streaming the movies smoothly. I am not finding a whole lot of troubleshooting on the net for the same problem, but have seen many parameters showing expresses more connected than mine. I tried a reboot total of each device individually to see if it would help, but she also seem well yesterday when I put initially in place. Someone at - it ideas?

It is really difficult to diagnose.

What I think is happening, is that the Express pass connection TB who work... connection to another express which will not work.

Apple does not seem to consider this never happens... but he does.

The best solution is to run ethernet and use the Express as AP instead of Repeater.

Since the simple reason that you run repeaters is to avoid running ethernet, I assume that this is not a viable alternative... so what about EOP adapters. They do not always work, but when they can work well.

Again, if they also fail, you can try to force the connection but you already use for many units.

Wireless is not really suitable for Repeater configurations... When you have 3 repeaters without the ability to change the names wireless... then it becomes a mess.

I do not recommend that you assign a different name for the two bands on the TC.

for example, TC24ghz and TC5ghz

Installed at least 2 express to extend the strip of 5 GHz... and other 2.4 GHz... one is the worst spot signal.

It may not work, but by changing the names and setting the wireless, give you him some hope of a connection just for the TC and does not paginate in the nearest Express.

Tags: Wireless

Similar Questions

use time capsule 4th generation to extend the network

Can I use the time Capsule (4th generation) to extend a network? I would like to connect via Ethernet to a router (Belkin) of non-Apple. Thank you.

-> Belkin router-> Ethernet cable modem-> Time Capsule-> wifi network products in another part of the House

Yes, it works perfectly.

The TC will be in bridge mode...

The wireless will be defined to create a wireless network.

You can use the distinct name to the Belkin Wireless... or you can use a name identical to the Belkin with identical password wireless and security setting... This is called roaming network, so in theory, you can wear around your wireless devices and they swap "tours" as a mobile phone... Sounds good in theory... a little less than the sum of the parts actually.

Time Capsule and Airport Express keeps disconnecting

I have a problem setting up the network at home. I have a Time Capsule that is connected to a router Huawei, the Capsule is set to 'Create a wireless network' and router mode "Off (bridge mode).

It was great to all workers and I get 2.4 Ghz and 5 GHz networks.

Today, I bought an Airport Express so I can extend the wifi signal in the new section of the House, I tried to connect it to the time Capsule because 'Extend a wireless network' for a while, it would connect and everything seems fine and then begins the two TC & AE drop and reconnect again and let down once again , the led starts between green and amber shifts from time to time and keep doing that... The WiFi keeps fall signals and reconnect!

I'm not sure what the problem... ! tried to set up two or three times but nothing seems to work. But once I turn off the AE, the TC begins works very well!

Here is how my network configuration must be:

Wall -> RJ11 >- Huawei -> Ethernet >- TC ... > WiFi >... AE

Note: when I connect the AE to transport CANADA the 1st time, this pattern was shown in Airport utility:

Internet > TC > AE

but it would be still lower, after the reset of the AE several times and tried to configure several times, now what I see is that both are connected to the Internet icon somehow!

Any help!

Begin by looking at the location of the AirPort Express to the TC Terminal. It is in the same room, another room or different floor? Another room or floor, if that it the basic construction building materials used in the walls or the ceiling in your home?

What exact models are each of your base stations?

Extend the reach of the WiFi with airport Time Capsule and Airport Express

I want to extend the range of my WiFi network running on a Time Capsule with an Airport Extreme airport. The Internet, ADSL, signal goes from the cable box in a closet and has two Ethernet cables connecting the box. I installed a simple Ethernet switch and ran inside, with both Internet cables Ethernet Miss and in two rooms in my apartment. I created the Capsule of time like the WiFi router, then the Express in the other room in Bridge Mode to extend the range of the WiFi network and enable AirPlay. This configuration works well for a while, but after a certain time has problems. The Express seems to go back to the creation of the WiFi network on its own and I saw the problem of the conflict addreses DCHP.

What seemed to work correctly using the Express as the "pivot" and I fell straight Internet on it and an Ethernet cable to connect the Time Capsule in Bridge Mode. It's far from ideal for me, however, because I like the Express to be in another room to extend the range of the WiFi network in this part of my apartment and be able to use it for AirPlay.

Help, please.

If you could let us know what operating system you use on your Mac or PC, we'll give you a configuration suggested for the AirPort Express, which will allow the Express and the Time Capsule to connect to the Ethernet switch and perform correctly.

We assume that the switch and the wiring will function properly in your current configuration, as well as the time Capsule, is that correct?

Airport Express, Time Capsule and Airport Express using the same network

Just moved into a new House and this is what I install. I have 7 Port wired into the House.

Closet of network in the Garage:
- Cable modem
- Airport Express
- netgear switch 8 ports
- It works pretty well. All my wired connections work fine. Wireless is quite good but cove not enough of space in my house.
Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections. Who works AND let me wish the WIFI?

Thank you!

Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.

Time capsule keeps going down

My Time Capsule is down intermittently for a few weeks now. Currently get Internet from Comcast. Y at - it an update of the firmware, can I try? I have to reboot physically to get connectivity. Thank you

What model of time Capsule did you?

How old is this device?

Comcast has done some changes on their system to integrate the new IPv6 service. Have you changed your settings on the Time Capsule for this?

How old is your "modem"?

How long has he fact that you swapped the Ethernet cable between your modem and Time Capsule?

Time Capsule will not extend the Airport Extreme network

My airport extreme (do not know what version... can't even find it in the system report) offers a WiFi modem. I have a Time Capsule 4 G which extends the network. This works well for a few years now. Suddenly, the CAP began flashing yellow. Time capsule said Airport utility cannot extend the network and I should make sure the password is correct, that it is in the signal of a network, etc. I went through the settings of the time capsule by ensuring that passwords are correct. It is certainly within the range of the signal of the airport extreme (they are both in the same place as always... Besides, I put my iPhone next to the time capsule and I get a signal strong). I tried a hard reset of the time capsule. Of course, this does not work.

Time Capsule seems to be communicating with the computer very well. I can access it via the Airport utility and reboot. I can access the data on its disk backup. Airport Extreme is to give a signal of good wi - fi connection. I'm still able to pick it up with my computer (even if my computer is far more than the time capsule).

Someone has an idea of what's going on?

Given that the Capsule does not correctly connect unless everything is OK with the AirPort Extreme... I suggest that you turn off the time Capsule for now and check that everything works correctly on the AirPort Extreme.

My airport extreme (do not know what version... can't even find it in the system report)

You say that the AirPort Extreme does not appear when you open AirPort Utility?

If so, press and hold the option on your Mac key while you double-click on the image of the AirPort Extreme.

Model of the AirPort Extreme, you will appear at the top of the summary page. What is it?

Near the bottom of the summary page, check to see if there is a parameter that is displayed for the State. If there is, what is the message next to status?

extension of nothingness with time capsule

How can I connect time capsule to netgear WiFi Extender

Depends on what model of Netgear you use.

How can I configure Time Capsule 3 to and Motorola NVG589 to access the Time Capsule backup drive?

I have ATT Uverse service and am ok with the performance of the WiFi of the NVG589. I want to configure my Time Capsule 3 to extend the network and be able to access the drive for backups Time Machine. I think I am following the steps in Airport utility, but once installation is complete I can find is no longer the time Capsule.

I want to configure my Time Capsule 3 to extend the network

The time Capsule cannot "extend" the network Uverse using a wireless connection, if that's maybe what you're trying to do. The time Capsule can only wireless "extend" the signal of another router from Apple.

The Capsule can be configured to extend the network to Uverse if it is connected permanently... anytime... to the Uverse router using a connection through wired Ethernet cable.

Please specify on what you're trying to accomplish, so that we can provide the correct steps.

Reset Time Capsule

Recently we have updated the modem cable from our ISP. They feared that I had "bridged" their older modem with our Time Capsule from Apple and they have suggested that may have impeded the reliability and power of the WIFI signal.

While the installation crew got TV HD on cable and update the connection wifi and pw on most of our devices, they do not affect the Time capsule and Airport Express units. I found a great set of instructions of Bob Timmons referenced as thread 7371984 I went to reset the Time capsule and everything seems OK. My question is - O of can now disconnect the cable between the cable modem and the Time Capsule? Or it is part of the permanent set up now?

How works the time Capsule, it's having its own network that the internet modem simply provides a wifi signal. Which means if you have the modem (thus has its own network name) plugged in you use the name of the network of the time Capsule (everything you have created) (with the modem wifi signal) and if you unplug the modem from the time Capsule... both the Capsule and the modem will continue to work separately.

The modem makes a wifi signal

Time Capsule provides a signal to connect on its own

The two will work alone, as if you didn't know it

However, unable to connect to two different wifi at the same time with the same camera signals and this is why you use the modem connected to the time Capsule so the time Capsule has the internet and you can use with the internet time Capsule.

I hope this helps.

Why I keep losing internet connection?

For a long time, I keep losing the internet connection.

I lose the connection when:
- I move to a different location around the House
- Another computer is turned on
- I just returned from a sleep mode
Why is this? Because of the router?

Help, please! Thanks in advance!

Hello

Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And
I would update your WiFi drivers on computers. How you are positioned in the router?
Are there obstacles in the path?

Actually try updating your driver and disabling the network logon.

Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
Note the version - click on update driver (can't do anything as MS is far behind certifying)
drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
stack.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

Download - SAVE - go where you put it - right click – RUN AS ADMIN.

You can download several at once however restart after the installation of each of them.

After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
(Those become your fonts of rescue system manufacturer).

Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
love the updated drivers.

I would also turn off auto update for the drivers. If Windows Update suggests a just HIDE
because they are almost always old, and you can search drivers manually as needed.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

------------------------------------------------------

Make sure you know the details of connection to your wireless router - SSID and password.

You lose connection when you do and have to redo your logon.

Control Panel - Network & Sharing Center - right, click custom - defined network
Locations page - down left click on merge or delete locations networks - REMOVE ALL THE
instances of your network (and others, you no longer use) - REBOOT. Start - connect
To connect to the network.

-----------------------------------------------------

Check this box:

Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194

Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
DHCP servers
http://support.Microsoft.com/kb/928233/en-us

----------------------------------------------------

And:

Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

no more WiFi which extends from the airport express and Time capsule

I have no more WiFi which extends from the express airport and Time capsule.

and once it worked...

airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

So it depends on the extend method you used.

I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

The best way to manage it is full factory reset on everything... and repeat the installation.

I have no more WiFi which extends from the express airport and Time capsule.

It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

The express could extend the TC or visa versa... by wireless...

Then I suggest say us what is the main router in the network?

You have connected by ethernet to the TC or Express or both?

If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

And your wireless tab is configured to create a wireless network...

Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

Extend my cable modem network via Airport express and Time Capsule

I am trying to expand my home network through my Airport express AND a Time Capsule. Installation of extension through the airport was easy and successful. I then tried to expand further with Time Capsule, but it gives me the opportunity to launch a new network. What do different to fix my Tim Capsule to my global network?

I then tried to expand further with Time Capsule

Unfortunately, it is not possible to do what you want... given that the function of "extend a wireless network" Apple will not accept to be extended once the network is not two.

The other question that you probably, it is that unless your 'main' router is also another router from Apple, the Express is not really 'extension' of the network at all, despite what you think. More likely, the Express is "membership" in the network. It can be used to connect a USB printer remote in this environment or for use with AirPlay... but the Express doesn't "spread" or "repeat" when he joined the network.

If you want to check if the Express is really extend the network, and you have a Mac laptop... after back and provide you with a few steps.

But even if the Express could be the extension of the network... Time Capsule will have to connect to the network using a permanent, wired cables Ethernet... ideally to your main router, but it might work OK if you connect to the Express.

can I use airport express to extend the range of my Airport time capsule

I want my airport express (model 1382) to be subordinated to the time capsule (ver. 7.7.3) and I'm on a different network. Is this possible?

Do not know what you mean by 'subordinate' here... and you do not specify if the AirPort Express terminal connects to the Capsule using a permanent, wired Ethernet cables... or... If you want to try to have the AirPort Express to connect wireless to the time Capsule.

The method cable would be far superior to the method wireless in terms of performance and 'slide' on the Time Capsule wireless.

You also did not indicate what device... a Mac, an iPhone / iPad, etc that you want to use to configure the AirPort Express Terminal.

So, when we have more information, we can provide you with an accurate answer to your question.

I renew the DHCP on my Airport Express Extender several times a day.

I have a time Capsule airport connected to an ATT Uverse router mode bridge as my wifi router. I have Airport Express 6 throughout the House using wifi Extender. I have to renew the DHCP lease on a large number of Extenders several times a day to keep them in line. I saw a few discussions online about this problem, but have not found a solution that works. Anyone know the problem?

I have a time Capsule airport connected to an ATT Uverse router mode bridge as my wifi router

Does that mean that the Time Capsule is in Bridge Mode... or... does that mean that the ATT Uverse router is in Bridge Mode?

Help if we understood what operating system you use the device that you use to administer airports.

Time Capsule keeps losing express Extender

Similar Questions

Maybe you are looking for