Time emails remain on server with XP

Similar Questions

• I send only less than 10 emails per day on my pc at home. 80% of the time, emails cannot be sent because the server of hotmail says that he is busy and to try again later.

  80% of the time, emails can be sent?

  I send only less than 10 emails per day on my pc at home. 80% of the time, emails cannot be sent because the server of hotmail says that he is busy and to try again later. It is even difficult to register the email project, the system responds that the server is busy.

  Hello Charles MEdgar,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I use Verizon as a server with their security suite. I can receive emails with any address with the exception of Windows Live Hotmail addresses.

  I use verizon as a server with their security suite.  I can receive emails with any address with the exception of hotmail addresses.  I put the filters for hotmail, but I can not receive emails from anyone with a hotmail account.  Any ideas or suggestions?
  Thank you

  Hi DonaldMagaw,

  When you use Windows Live Hotmail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Solution Center Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

  I hope this helps.

• When importing from other email accounts emails remain in the original Inbox?

  1. for the importation of other e-mail accounts emails remain in the original Inbox to gmail site etc?
  2. If the remaining in the original Inbox, they will appear as 'read '?

  1. that depends on what you mean by "import."

  If the account uses the IMAP protocol, Thunderbird will show you what is on the server. There is no need to "import" anything.

  POP is quite different. It will default to move all messages from the server down to Thunderbird and then delete them from the server. If you don't want to do it, start Thunderbird in offline mode and configure "Leave a copy of messages on the server" in the settings of the account in Thunderbird.

  2. I don't know with certainty how the/unread status is managed, but some experiences here show that Thunderbird keeps synched with the playback on the server status. I'm waiting your messages read to appear as "read", like a message 'read' on the server is reflected as "read" also in Thunderbird.

• Can't send or receive emails through Verizon server after update to Thunderbird

  After update to Thunderbird, Verizon server no longer recognizes my password, then authentication keeps failing. I can't send or receive e-mail. Account settings are correct. Any ideas? Thank you.

  Hello

  We went from DSL to FIOS. As a result, I received a new email address, but arranged with Verizon to use my original lequipetv.fr e-mail address. I had no access to mail the original account for several weeks after the conversion to FIOS. For some reason, at that time, that I've updated Thunderbird, the original e-mail address and the password were no longer recognized by Verizon. After working with them, they were able to restore access. But then, later that day, I was unable to open a session. Back to Verizon... went through the same procedure and got things restored again. It has been a few days now. If all goes well, it will continue to do so indefinitely.

  )

• How can I get thunder bird to move the emails form the server instead of copy them?

  Whenever I get my email remains a copy on the server.
  until I have to log on to the server and delete them.
  How can I get the emails to be moved from the server instead of being copied?

  Because you don't want to leave a copy on the server that would be the first to uncheck.

• I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here.

  I have a server to SP1 Windows 2008R2 with .NET Framework 3.5. I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here. Why it does this and how do I upgrade to 4.0 to run programs that require the 4.0?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• BlackBerry Q10 Emails remain highlighted (blue)

  I meet a strange problem, after using the option "select more" when deleting emails, after selected emails are deleted, the display returns to you email normal page, now, when I tap on an email, rather than open this e-mail, he pointed out actually it, even after I tap again on this e-mail and the e-mail opens, once I hit 'back' to the e-mail page that email remains highlighted. I can't get the removed organ point, unless I go to the option and click on Mark no read / reading... If anyone can help?

  OK, so now do a full reboot... this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• Cannot send emails from marroitt Hotels with outlook

  Cannot send emails from marroitt Hotels with outlook, but can receive e-mail?

  It depends on your ISP Internet and email.  If you are not connected to their system, you cannot send emails (to prevent others from spamming).  Many vendors have a port special number you can use and that, coupled with authentication, you can send them somewhere else until you are connected through their system.  Then, contact your Internet provider or visit their Web site, which should have the correct settings to use to send to other locations.  During this time, see if you can use webmail via the browser on your access provider's website to send messages.

  Steve

• BlackBerry Smartphones email works, but not with BlackBerry

  Hello world

  I came across a rather strange problem, after some extensive research, I can't find any solution so I came here to ask if anyone can provide all the answers to this.

  I have my own email [field] and it works great, reception/sending emails emails and it works with my office etc. outside my BlackBerry - I go in BlackBerry email setup and enter all the details of the email, and it says

  'Not found e-mail address field. Email address * is not found. Please veryify that... »

  I checked the area and of the box DNS/MX records - all seem to be well (apparently), as the works of e-mail with Outlook and I can access webmail very well...

  It all started a week before, I don't know why!

  Hello

  Thanks for your help - the problem has now been fixed.

  I think the problem has to do with DNS records that I did a Checkup and Diagnostics said that the Reverse DNS was not correctly install, and after some research, I've added a PTR to the mail server.

  p. ex. x.x.x > mail.x.net

  mail.x.NET > x.x.x

  When I sent a message to my desktop client to another e-mail address, he said that my email has been updated with the index etc. As the spam filters recognize not (very probably) where my mail came, and this is probably the question with setting up email to work with the BlackBerry!

  Everything works now, probably a problem common among others - thanks for your help, much appreciated.

  Khyshen

• Different response time for each virtual server in the cluster, weblogic 11g

  
  Hello everyone
  
  currently I set up a server with the following characteristics.
  
  O.S. AIX 7
  RAM 32 G
  WebLogic 11 g
  Cluster 4 Server (4 GB each).
  
  My Web the application is deployed on the 4 using servers the management console on another physical server.
  
  J’ai responsible for tests on each server get different time as follows:
  
  Server 1: HostApp: 7090 -> 13 8 seconds
  Server 2: HostApp: 7090 -13 > 5 seconds
  Server 3: HostApp: 7090 -10 > 4 seconds
  Server 4: HostApp: 7090 -> 8 seconds
  
  distribution the load is material.
  
  Why This behavior?
  
  expected be around the same value or not?

  
  

  Thank you

  Please see my comments below:

  1. what made the request? It goes to the database? He calls a web service? Provide details

  2. how to access the application, you have a web server or a load balancer? Provide details.

  2 - is a web application? Is possible to test the application from a browser in the same area where the weblogic?

  I would try that because in this way we can isolate the problem to understand if this is a network problem or a matter of WebLogic Server.

  Best regards

  Luz

• Incompatibility of the thumbprint SSL in Remote Console on the new ESXI5.1 server with the same name as the old

  I use the vSphere Client Desktop for remote access to a VMware host if SSH tunneling. Basically, I aim at the customer 'localhost' and it is redirected via the SSH tunnel on the server at the other end.   I usually always could access the things just fine, but recently, I replaced the remote server with a new one.  Off the old, I changed my SSH tunnel to point to the new server.  The client is connected correctly, and I can see the virtual machine and work very well with the host country.  However, if I try to open a remote console, I get an error saying "failed to check SSL for 'mylocalmachinename.domain.com' due to incompatibility of fingerprint digital host: stored fingerprint '< checked again footprint esxi host >' does not imprint of cert" < imprint of mystery which does not correspond to a new host * or * former > ' I still find from this certificate thumprint!  I can get remote consoles on those virtual machines to machines that are the on the host, but not this remote workstation.  This * feels * like a sort of updated certificate cached somewhere, but I can't find of it empty.  I checked the registry and the thumbprint for the remote server is correct.  The part of remote console of the vsphere client there is thumprint own cache somewhere?

  MEH.  Response proved to be something completely independent and stupid.  There is a process running in my system that was also listening on port 443.  Why it intervened with the virtual console only and not the main customer I have no idea, but stopping did the trick.  It was another application I had installed some time ago and off it, I realized that I don't think that I actually * tried * run a console on the old vmware remote host because I installed this application.  It has probably been broken for a while now and I barely noticed.    So... Yes... too bad.

• Unable to connect to the server with ttisqlcs, failed to retrieve IP address of the system

  Please help me, I have installed timesten server and client on different machines in the LAN, but with the same user and group - ttadmin:ttgroup

  When I tried to connect to the server with ttisqlcs - connStr "DSN = sampleCS"

  The result gave me errors like below

  Connect "DSN is sampleCS ';.

  S1000: Unable to retrieve the IP address of the system. System error:-2

  The command failed.

  Fact.

  The related part in sys.ttconnect.ini is defined as below

  [192.168.0.206]

  Description = TimesTen Server

  Adresse_reseau = 192.168.0.206

  PORT_TCP = 53397

  And the sys.odbc.ini

  [ODBC data sources]

  sampleCS = TimesTen 11.2.2 Client Driver

  [sampleCS]

  TTC_SERVER = 192.168.0.206

  TTC_SERVER_DSN = nredb_ds

  That wants it mean by 'recovering intellectual '?

  He is trying to resolve IP by hostname even when I already gave him the ip address?

  Either way, I can ping 192.168.0.206 and telnet to port 53397 without problem.

  Please help me, thanks ~

  It does not matter that they are VMs (I use between virtual machines all the time), but "Networking" of VM, of course, must be set up correctly. But if you can ping and telnet between VMS so that shouldn't be a problem.

  On the client computer, you have an entry in/etc/hosts for the client machines and the server? Even on the server? Please check that and add entries if they are not there and see if it helps. If not then we need to find the client using 'strace' to see which system call fails. Please try and after the release (or at least the last part that leads to failure).

  Thank you

  Chris

• A physical server with 2 NETWORK interface card using a virtual machine as IPS (transparent VM) and everything should work normally?

  Hello guys.

  Is there a diagram that I made, using for my self this question.

  

  As you can see, I have a physical server with 2 NIC I don't want to use a VM (with Snort) as IPS / IDS system for inbound traffic on the management of VLANS. Is it possible to use this VM in this way (as an IPS/IDS, VM with two NIC without any routing work?)? Maybe you have a suggestion, how can I achieve this, as easy as possible? Maybe you have an opinion, what OS unix system do I use?

  Thank you for your time and your answers. Any useful information is much appreciated.

  Yes, it should work. You need to look out for, it's that the 'outgoing' NIC is not connected to the same physical switch as the entrant and that there is no link between these two physical switches, because this would create a loop of layer 2 on the network.

  I haven't worked much with Linux, but I don't see that you would have a problem to find some Linux/Unix with the possibility to bridge two network cards and use some software IPS to inspect the traffic.

• How to configure vCenter Server with an external smtp server?

  Is it possible to configure vCentere Server with an external smtp server?

  In our environment, we must configure vCenter server to send email alerts when the alarms are triggered. We use the google apps (smtp.gmail.com) server as our official email server.

  I know the steps to do the same?

  You must authenticate external messages. Here is one of this tutorial. http://paulgrevink.WordPress.com/2011/02/06/configuring-vCenter-for-email-with-SMTP-authentication/